/*
* rk816_battery.h: fuel gauge driver structures
*
* Copyright (C) 2016 Rockchip Electronics Co., Ltd
* Author: chenjh <chenjh@rock-chips.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#ifndef RK816_BATTERY
#define RK816_BATTERY
/*TS_CTRL_REG*/
#define GG_EN BIT(7)
#define ADC_CUR_EN BIT(6)
#define ADC_TS1_EN BIT(5)
#define ADC_TS2_EN BIT(4)
/*GGCON*/
#define ADC_CUR_MODE (0x01 << 1)
#define AVG_CUR_MODE (0x00 << 0)
#define ADC_CAL_MIN_MSK 0x30
#define ADC_CAL_8MIN (0x00 << 4)
#define OCV_SAMP_MIN_MSK 0x0c
#define OCV_SAMP_8MIN (0x00 << 2)
/*GGSTS*/
#define FCC_LOCK (1 << 5)
#define BAT_CON (1 << 4)
#define RELAX_STS (1 << 1)
#define RELAX_VOL1_UPD BIT(3)
#define RELAX_VOL2_UPD BIT(2)
#define RELAX_VOL12_UPD_MSK (RELAX_VOL1_UPD | RELAX_VOL2_UPD)
/*SUP_STS_REG*/
#define BAT_EXS (1 << 7)
#define CHARGE_OFF (0x00 << 4)
#define DEAD_CHARGE (0x01 << 4)
#define TRICKLE_CHARGE (0x02 << 4)
#define CC_OR_CV (0x03 << 4)
#define CHARGE_FINISH (0x04 << 4)
#define USB_OVER_VOL (0x05 << 4)
#define BAT_TMP_ERR (0x06 << 4)
#define TIMER_ERR (0x07 << 4)
#define USB_EXIST (1 << 1)
#define USB_EFF (1 << 0)
#define USB_VLIMIT_EN BIT(3)
#define USB_CLIMIT_EN BIT(2)
#define CHRG_STATUS_MSK 0x70
/*USB_CTRL_REG*/
#define CHRG_CT_EN (1 << 7)
#define INPUT_CUR_MSK (0x0f)
#define FINISH_CUR_MSK 0xc0
#define CHRG_CUR_MSK (0x0f)
/* BAT_CTRL_REG */
#define USB_SYS_EN BIT(6)
/* THERMAL_REG */
#define FB_TEMP_MSK 0x0c
#define HOTDIE_STS BIT(1)
/*CHGR_CUR_INPUT*/
#define INPUT_CUR450MA (0x00)
#define INPUT_CUR80MA (0x01)
#define INPUT_CUR850MA (0x02)
#define INPUT_CUR1000MA (0x03)
#define INPUT_CUR1250MA (0x04)
#define INPUT_CUR1500MA (0x05)
#define INPUT_CUR1750MA (0x06)
#define INPUT_CUR2000MA (0x07)
#define INPUT_CUR2250MA (0x08)
#define INPUT_CUR2500MA (0x09)
#define INPUT_CUR2750MA (0x0A)
#define INPUT_CUR3000MA (0x0B)
/*CHRG_VOL_SEL*/
#define CHRG_VOL4050MV (0x00 << 4)
#define CHRG_VOL4100MV (0x01 << 4)
#define CHRG_VOL4150MV (0x02 << 4)
#define CHRG_VOL4200MV (0x03 << 4)
#define CHRG_VOL4300MV (0x04 << 4)
#define CHRG_VOL4350MV (0x05 << 4)
/*CHRG_CUR_SEL*/
#define CHRG_CUR1000MA (0x00)
#define CHRG_CUR1200MA (0x01)
#define CHRG_CUR1400MA (0x02)
#define CHRG_CUR1600MA (0x03)
#define CHRG_CUR1800MA (0x04)
#define CHRG_CUR2000MA (0x05)
#define CHRG_CUR2200MA (0x06)
#define CHRG_CUR2400MA (0x07)
#define CHRG_CUR2600MA (0x08)
#define CHRG_CUR2800MA (0x09)
#define CHRG_CUR3000MA (0x0A)
/*THREAML_REG*/
#define TEMP_85C (0x00 << 2)
#define TEMP_95C (0x01 << 2)
#define TEMP_105C (0x02 << 2)
#define TEMP_115C (0x03 << 2)
/*CHRG_CTRL_REG2*/
#define CHG_CCCV_4HOUR (0x00)
#define CHG_CCCV_5HOUR (0x01)
#define CHG_CCCV_6HOUR (0x02)
#define CHG_CCCV_8HOUR (0x03)
#define CHG_CCCV_10HOUR (0x04)
#define CHG_CCCV_12HOUR (0x05)
#define CHG_CCCV_14HOUR (0x06)
#define CHG_CCCV_16HOUR (0x07)
#define FINISH_100MA (0x00 << 6)
#define FINISH_150MA (0x01 << 6)
#define FINISH_200MA (0x02 << 6)
#define FINISH_250MA (0x03 << 6)
/*CHRG_CTRL_REG3*/
#define CHRG_TERM_ANA_SIGNAL (0 << 5)
#define CHRG_TERM_DIG_SIGNAL (1 << 5)
#define CHRG_TIMER_CCCV_EN (1 << 2)
#define CHRG_EN (1 << 7)
#define BOOST_OTG_MASK ((0x3 << 5) | (0x3 << 1))
#define BOOST_OTG_ON ((0x3 << 5) | (0x3 << 1))
#define BOOST_OTG_OFF ((0x3 << 5) | (0x0 << 1))
#define BOOST_OFF_OTG_ON ((0x3 << 5) | (0x2 << 1))
#define OTG_BOOST_SLP_ON (0x3 << 5)
/* MISC_MARK_REG */
#define FG_INIT BIT(3)
#define FG_RESET_LATE BIT(1)
#define FG_RESET_NOW BIT(0)
#define ALGO_REST_MODE_MSK (0xc0)
#define ALGO_REST_MODE_SHIFT 6
#define FB_TEMP_SHIFT 2
#define CHRG_VOL_SEL_SHIFT 4
#define CHRG_CRU_INPUT_SHIFT 0
#define CHRG_CRU_SEL_SHIFT 0
#define CHRG_CCCV_HOUR_SHIFT 0
#define OCV_CALIB_SHIFT (1 << 1)
#define PLUG_IN_STS (1 << 6)
#define DRIVER_VERSION "1.2"
#define TIMER_MS_COUNTS 1000
#define MAX_PERCENTAGE 100
#define MAX_INT 0x7FFF
#define MAX_INTERPOLATE 1000
struct temp_chrg_table {
int temp_down;
int temp_up;
u32 chrg_current;
u8 set_chrg_current;
};
struct battery_platform_data {
u32 *ocv_table;
u32 *zero_table;
struct temp_chrg_table *tc_table;
u32 tc_count;
u32 table_t[4][21];
int temp_t[4];
u32 temp_t_num;
u32 *ntc_table;
u32 ocv_size;
u32 ntc_size;
int ntc_degree_from;
u32 ntc_factor;
u32 max_input_current;
u32 max_chrg_current;
u32 max_chrg_voltage;
u32 pwroff_vol;
u32 monitor_sec;
u32 zero_algorithm_vol;
u32 zero_reserve_dsoc;
u32 bat_res;
u32 design_capacity;
u32 design_qmax;
u32 sleep_enter_current;
u32 sleep_exit_current;
u32 sleep_filter_current;
u32 power_dc2otg;
u32 max_soc_offset;
u32 bat_mode;
u32 fb_temp;
u32 energy_mode;
u32 cccv_hour;
u32 dc_det_adc;
int dc_det_pin;
u8 dc_det_level;
int otg5v_suspend_enable;
u32 sample_res;
bool extcon;
};
enum work_mode {
MODE_ZERO = 0,
MODE_FINISH,
MODE_SMOOTH_CHRG,
MODE_SMOOTH_DISCHRG,
MODE_SMOOTH,
};
enum bat_mode {
MODE_BATTARY = 0,
MODE_VIRTUAL,
};
enum charger_t {
USB_TYPE_UNKNOWN_CHARGER,
USB_TYPE_NONE_CHARGER,
USB_TYPE_USB_CHARGER,
USB_TYPE_AC_CHARGER,
USB_TYPE_CDP_CHARGER,
DC_TYPE_DC_CHARGER,
DC_TYPE_NONE_CHARGER,
};
enum charger_state {
OFFLINE = 0,
ONLINE
};
static const u16 FEED_BACK_TEMP[] = {
85, 95, 105, 115
};
static const u16 CHRG_VOL_SEL[] = {
4050, 4100, 4150, 4200, 4250, 4300, 4350
};
/*
* If sample resistor changes, we need caculate a new CHRG_CUR_SEL[] table.
*
* Calculation method:
* 1. find 20mR(default) current charge table, that is:
* 20mR: [1000, 1200, 1400, 1600, 1800, 2000, 2250, 2400]
*
* 2. caculate Rfac(not care much, just using it) by sample resistor(ie. Rsam);
* Rsam = 20mR: Rfac = 10;
* Rsam > 20mR: Rfac = Rsam * 10 / 20;
* Rsam < 20mR: Rfac = 20 * 10 / Rsam;
*
* 3. from step2, we get Rfac, then we can get new charge current table by 20mR
* charge table:
* Iorg: member from 20mR charge table; Inew: new member for charge table.
*
* Rsam > 20mR: Inew = Iorg * 10 / Rfac;
* Rsam < 20mR: Inew = Iorg * Rfac / 10;
*
* Notice: Inew should round up if it is not a integer!!!
*
* Example:
* 10mR: [2000, 2400, 2800, 3200, 3600, 4000, 4500, 4800]
* 20mR: [1000, 1200, 1400, 1600, 1800, 2000, 2250, 2400]
* 40mR: [500, 600, 700, 800, 900, 1000, 1125, 1200]
* 50mR: [400, 480, 560, 640, 720, 800, 900, 960]
* 60mR: [334, 400, 467, 534, 600, 667, 750, 800]
*
* You should add property 'sample_res = <Rsam>' at battery node.
*/
static const u16 CHRG_CUR_SEL[] = {
1000, 1200, 1400, 1600, 1800, 2000, 2250, 2400
};
static const u16 CHRG_CUR_INPUT[] = {
450, 80, 850, 1000, 1250, 1500, 1750, 2000
};
void kernel_power_off(void);
#endif
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags