author: Rafał Miłecki <zajec5@gmail.com> 2015-05-13 07:36:38 +0200
committer: Kalle Valo <kvalo@codeaurora.org> 2015-05-20 16:36:06 +0300
commit: c411ead995b46f361b92116fd042ae83866044a1
parent: f673821864899153142365aca888435815ac93f0
Commit Summary:
Diffstat:
1 file changed, 4 insertions, 3 deletions
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 15a7ee3859dd..5fe1c22e289b 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -359,12 +359,13 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
/*
* Accessing PCI config without a proper delay after devices reset (not
- * GPIO reset) was causing reboots on WRT300N v1.0.
+ * GPIO reset) was causing reboots on WRT300N v1.0 (BCM4704).
* Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it
* completely. Flushing all writes was also tested but with no luck.
+ * The same problem was reported for WRT350N v1 (BCM4705), so we just
+ * sleep here unconditionally.
*/
- if (pc->dev->bus->chip_id == 0x4704)
- usleep_range(1000, 2000);
+ usleep_range(1000, 2000);
/* Enable PCI bridge BAR0 prefetch and burst */
val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;