^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 1) /* SPDX-License-Identifier: GPL-2.0 */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 2) #ifndef _ASM_GENERIC_GPIO_H
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 3) #define _ASM_GENERIC_GPIO_H
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 4)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 5) #include <linux/types.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 6) #include <linux/errno.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 7)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 8) #ifdef CONFIG_GPIOLIB
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 9)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10) #include <linux/compiler.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11) #include <linux/gpio/driver.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) #include <linux/gpio/consumer.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14) /* Platforms may implement their GPIO interface with library code,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) * at a small performance cost for non-inlined operations and some
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) * extra memory (for code and for per-GPIO table entries).
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) *
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) * While the GPIO programming interface defines valid GPIO numbers
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) * to be in the range 0..MAX_INT, this library restricts them to the
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) * smaller range 0..ARCH_NR_GPIOS-1.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 21) *
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 22) * ARCH_NR_GPIOS is somewhat arbitrary; it usually reflects the sum of
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 23) * builtin/SoC GPIOs plus a number of GPIOs on expanders; the latter is
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 24) * actually an estimate of a board-specific value.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 25) */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 26)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 27) #ifndef ARCH_NR_GPIOS
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 28) #if defined(CONFIG_ARCH_NR_GPIO) && CONFIG_ARCH_NR_GPIO > 0
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 29) #define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 30) #else
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 31) #define ARCH_NR_GPIOS 512
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 32) #endif
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 33) #endif
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 34)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 35) /*
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 36) * "valid" GPIO numbers are nonnegative and may be passed to
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 37) * setup routines like gpio_request(). only some valid numbers
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 38) * can successfully be requested and used.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 39) *
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 40) * Invalid GPIO numbers are useful for indicating no-such-GPIO in
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 41) * platform data and other tables.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 42) */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 43)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 44) static inline bool gpio_is_valid(int number)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 45) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 46) return number >= 0 && number < ARCH_NR_GPIOS;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 47) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 48)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 49) struct device;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 50) struct gpio;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 51) struct seq_file;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 52) struct module;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 53) struct device_node;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 54) struct gpio_desc;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 55)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 56) /* caller holds gpio_lock *OR* gpio is marked as requested */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 57) static inline struct gpio_chip *gpio_to_chip(unsigned gpio)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 58) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 59) return gpiod_to_chip(gpio_to_desc(gpio));
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 60) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 61)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 62) /* Always use the library code for GPIO management calls,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 63) * or when sleeping may be involved.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 64) */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 65) extern int gpio_request(unsigned gpio, const char *label);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 66) extern void gpio_free(unsigned gpio);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 67)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 68) static inline int gpio_direction_input(unsigned gpio)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 69) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 70) return gpiod_direction_input(gpio_to_desc(gpio));
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 71) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 72) static inline int gpio_direction_output(unsigned gpio, int value)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 73) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 74) return gpiod_direction_output_raw(gpio_to_desc(gpio), value);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 75) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 76)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 77) static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 78) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 79) return gpiod_set_debounce(gpio_to_desc(gpio), debounce);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 80) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 81)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 82) static inline int gpio_get_value_cansleep(unsigned gpio)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 83) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 84) return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio));
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 85) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 86) static inline void gpio_set_value_cansleep(unsigned gpio, int value)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 87) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 88) return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 89) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 90)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 91)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 92) /* A platform's <asm/gpio.h> code may want to inline the I/O calls when
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 93) * the GPIO is constant and refers to some always-present controller,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 94) * giving direct access to chip registers and tight bitbanging loops.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 95) */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 96) static inline int __gpio_get_value(unsigned gpio)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 97) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 98) return gpiod_get_raw_value(gpio_to_desc(gpio));
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 99) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 100) static inline void __gpio_set_value(unsigned gpio, int value)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 101) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 102) return gpiod_set_raw_value(gpio_to_desc(gpio), value);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 103) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 104)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 105) static inline int __gpio_cansleep(unsigned gpio)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 106) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 107) return gpiod_cansleep(gpio_to_desc(gpio));
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 108) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 109)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 110) static inline int __gpio_to_irq(unsigned gpio)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 111) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 112) return gpiod_to_irq(gpio_to_desc(gpio));
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 113) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 114)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 115) extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 116) extern int gpio_request_array(const struct gpio *array, size_t num);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 117) extern void gpio_free_array(const struct gpio *array, size_t num);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 118)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 119) /*
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 120) * A sysfs interface can be exported by individual drivers if they want,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 121) * but more typically is configured entirely from userspace.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 122) */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 123) static inline int gpio_export(unsigned gpio, bool direction_may_change)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 124) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 125) return gpiod_export(gpio_to_desc(gpio), direction_may_change);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 126) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 127)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 128) static inline int gpio_export_link(struct device *dev, const char *name,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 129) unsigned gpio)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 130) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 131) return gpiod_export_link(dev, name, gpio_to_desc(gpio));
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 132) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 133)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 134) static inline void gpio_unexport(unsigned gpio)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 135) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 136) gpiod_unexport(gpio_to_desc(gpio));
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 137) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 138)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 139) #else /* !CONFIG_GPIOLIB */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 140)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 141) #include <linux/kernel.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 142)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 143) static inline bool gpio_is_valid(int number)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 144) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 145) /* only non-negative numbers are valid */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 146) return number >= 0;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 147) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 148)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 149) /* platforms that don't directly support access to GPIOs through I2C, SPI,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 150) * or other blocking infrastructure can use these wrappers.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 151) */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 152)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 153) static inline int gpio_cansleep(unsigned gpio)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 154) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 155) return 0;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 156) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 157)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 158) static inline int gpio_get_value_cansleep(unsigned gpio)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 159) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 160) might_sleep();
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 161) return __gpio_get_value(gpio);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 162) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 163)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 164) static inline void gpio_set_value_cansleep(unsigned gpio, int value)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 165) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 166) might_sleep();
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 167) __gpio_set_value(gpio, value);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 168) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 169)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 170) #endif /* !CONFIG_GPIOLIB */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 171)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 172) #endif /* _ASM_GENERIC_GPIO_H */