Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   1) # SPDX-License-Identifier: GPL-2.0
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   2) #
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   3) # Physical Layer USB driver configuration
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   4) #
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   5) menu "USB Physical Layer drivers"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   6) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   7) config USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   8) 	select EXTCON
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   9) 	def_bool n
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  10) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  11) #
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  12) # USB Transceiver Drivers
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  13) #
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  14) config AB8500_USB
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  15) 	tristate "AB8500 USB Transceiver Driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  16) 	depends on AB8500_CORE
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  17) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  18) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  19) 	  Enable this to support the USB OTG transceiver in AB8500 chip.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  20) 	  This transceiver supports high and full speed devices plus,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  21) 	  in host mode, low speed.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  22) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  23) config FSL_USB2_OTG
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  24) 	tristate "Freescale USB OTG Transceiver Driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  25) 	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  26) 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  27) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  28) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  29) 	  Enable this to support Freescale USB OTG transceiver.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  30) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  31) config ISP1301_OMAP
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  32) 	tristate "Philips ISP1301 with OMAP OTG"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  33) 	depends on I2C && ARCH_OMAP_OTG
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  34) 	depends on USB
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  35) 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  36) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  37) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  38) 	  If you say yes here you get support for the Philips ISP1301
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  39) 	  USB-On-The-Go transceiver working with the OMAP OTG controller.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  40) 	  The ISP1301 is a full speed USB  transceiver which is used in
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  41) 	  products including H2, H3, and H4 development boards for Texas
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  42) 	  Instruments OMAP processors.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  43) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  44) 	  This driver can also be built as a module.  If so, the module
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  45) 	  will be called phy-isp1301-omap.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  46) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  47) config KEYSTONE_USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  48) 	tristate "Keystone USB PHY Driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  49) 	depends on ARCH_KEYSTONE || COMPILE_TEST
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  50) 	depends on NOP_USB_XCEIV
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  51) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  52) 	  Enable this to support Keystone USB phy. This driver provides
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  53) 	  interface to interact with USB 2.0 and USB 3.0 PHY that is part
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  54) 	  of the Keystone SOC.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  55) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  56) config NOP_USB_XCEIV
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  57) 	tristate "NOP USB Transceiver Driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  58) 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, NOP can't be built-in
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  59) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  60) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  61) 	  This driver is to be used by all the usb transceiver which are either
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  62) 	  built-in with usb ip or which are autonomous and doesn't require any
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  63) 	  phy programming such as ISP1x04 etc.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  64) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  65) config AM335X_CONTROL_USB
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  66) 	tristate
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  67) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  68) config AM335X_PHY_USB
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  69) 	tristate "AM335x USB PHY Driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  70) 	depends on ARM || COMPILE_TEST
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  71) 	depends on NOP_USB_XCEIV
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  72) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  73) 	select AM335X_CONTROL_USB
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  74) 	select USB_COMMON
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  75) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  76) 	  This driver provides PHY support for that phy which part for the
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  77) 	  AM335x SoC.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  78) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  79) config TWL6030_USB
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  80) 	tristate "TWL6030 USB Transceiver Driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  81) 	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  82) 	depends on OF
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  83) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  84) 	  Enable this to support the USB OTG transceiver on TWL6030
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  85) 	  family chips. This TWL6030 transceiver has the VBUS and ID GND
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  86) 	  and OTG SRP events capabilities. For all other transceiver functionality
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  87) 	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  88) 	  are hooked to this driver through platform_data structure.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  89) 	  The definition of internal PHY APIs are in the mach-omap2 layer.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  90) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  91) config USB_GPIO_VBUS
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  92) 	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  93) 	depends on GPIOLIB || COMPILE_TEST
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  94) 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  95) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  96) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  97) 	  Provides simple GPIO VBUS sensing for controllers with an
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  98) 	  internal transceiver via the usb_phy interface, and
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  99) 	  optionally control of a D+ pullup GPIO as well as a VBUS
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 100) 	  current limit regulator.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 101) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 102) config OMAP_OTG
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 103) 	tristate "OMAP USB OTG controller driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 104) 	depends on ARCH_OMAP_OTG && EXTCON
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 105) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 106) 	  Enable this to support some transceivers on OMAP1 platforms. OTG
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 107) 	  controller is needed to switch between host and peripheral modes.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 108) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 109) 	  This driver can also be built as a module. If so, the module
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 110) 	  will be called phy-omap-otg.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 111) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 112) config TAHVO_USB
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 113) 	tristate "Tahvo USB transceiver driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 114) 	depends on MFD_RETU
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 115) 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 116) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 117) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 118) 	  Enable this to support USB transceiver on Tahvo. This is used
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 119) 	  at least on Nokia 770.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 120) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 121) config TAHVO_USB_HOST_BY_DEFAULT
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 122) 	depends on TAHVO_USB
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 123) 	bool "Device in USB host mode by default"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 124) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 125) 	  Say Y here, if you want the device to enter USB host mode
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 126) 	  by default on bootup.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 127) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 128) config USB_ISP1301
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 129) 	tristate "NXP ISP1301 USB transceiver support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 130) 	depends on USB || USB_GADGET
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 131) 	depends on I2C
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 132) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 133) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 134) 	  Say Y here to add support for the NXP ISP1301 USB transceiver driver.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 135) 	  This chip is typically used as USB transceiver for USB host, gadget
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 136) 	  and OTG drivers (to be selected separately).
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 137) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 138) 	  To compile this driver as a module, choose M here: the
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 139) 	  module will be called phy-isp1301.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 140) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 141) config USB_MV_OTG
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 142) 	tristate "Marvell USB OTG support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 143) 	depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 144) 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 145) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 146) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 147) 	  Say Y here if you want to build Marvell USB OTG transciever
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 148) 	  driver in kernel (including PXA and MMP series). This driver
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 149) 	  implements role switch between EHCI host driver and gadget driver.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 150) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 151) 	  To compile this driver as a module, choose M here.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 152) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 153) config USB_MXS_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 154) 	tristate "Freescale MXS USB PHY support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 155) 	depends on ARCH_MXC || ARCH_MXS
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 156) 	select STMP_DEVICE
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 157) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 158) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 159) 	  Enable this to support the Freescale MXS USB PHY.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 160) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 161) 	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 162) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 163) config USB_TEGRA_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 164) 	tristate "NVIDIA Tegra USB PHY Driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 165) 	depends on ARCH_TEGRA || COMPILE_TEST
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 166) 	select USB_COMMON
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 167) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 168) 	select USB_ULPI
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 169) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 170) 	  This driver provides PHY support for the USB controllers found
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 171) 	  on NVIDIA Tegra SoC's.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 172) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 173) config USB_ULPI
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 174) 	bool "Generic ULPI Transceiver Driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 175) 	depends on ARM || ARM64 || COMPILE_TEST
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 176) 	select USB_ULPI_VIEWPORT
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 177) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 178) 	  Enable this to support ULPI connected USB OTG transceivers which
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 179) 	  are likely found on embedded boards.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 180) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 181) config USB_ULPI_VIEWPORT
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 182) 	bool
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 183) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 184) 	  Provides read/write operations to the ULPI phy register set for
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 185) 	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 186) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 187) config JZ4770_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 188) 	tristate "Ingenic SoCs Transceiver Driver"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 189) 	depends on MIPS || COMPILE_TEST
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 190) 	select USB_PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 191) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 192) 	  This driver provides PHY support for the USB controller found
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 193) 	  on the JZ-series and X-series SoCs from Ingenic.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 194) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 195) endmenu