Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   1) /*======================================================================
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   2) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   3)     A driver for the Qlogic SCSI card
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   4) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   5)     qlogic_cs.c 1.79 2000/06/12 21:27:26
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   6) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   7)     The contents of this file are subject to the Mozilla Public
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   8)     License Version 1.1 (the "License"); you may not use this file
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300   9)     except in compliance with the License. You may obtain a copy of
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  10)     the License at http://www.mozilla.org/MPL/
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  11) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  12)     Software distributed under the License is distributed on an "AS
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  13)     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  14)     implied. See the License for the specific language governing
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  15)     rights and limitations under the License.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  16) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  17)     The initial developer of the original code is David A. Hinds
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  18)     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  19)     are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  20) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  21)     Alternatively, the contents of this file may be used under the
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  22)     terms of the GNU General Public License version 2 (the "GPL"), in which
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  23)     case the provisions of the GPL are applicable instead of the
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  24)     above.  If you wish to allow the use of your version of this file
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  25)     only under the terms of the GPL and not to allow others to use
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  26)     your version of this file under the MPL, indicate your decision
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  27)     by deleting the provisions above and replace them with the notice
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  28)     and other provisions required by the GPL.  If you do not delete
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  29)     the provisions above, a recipient may use your version of this
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  30)     file under either the MPL or the GPL.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  31)     
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  32) ======================================================================*/
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  33) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  34) #include <linux/module.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  35) #include <linux/init.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  36) #include <linux/kernel.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  37) #include <linux/slab.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  38) #include <linux/string.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  39) #include <linux/ioport.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  40) #include <asm/io.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  41) #include <scsi/scsi.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  42) #include <linux/major.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  43) #include <linux/blkdev.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  44) #include <scsi/scsi_ioctl.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  45) #include <linux/interrupt.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  46) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  47) #include "scsi.h"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  48) #include <scsi/scsi_host.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  49) #include "../qlogicfas408.h"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  50) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  51) #include <pcmcia/cistpl.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  52) #include <pcmcia/ds.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  53) #include <pcmcia/ciscode.h>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  54) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  55) /* Set the following to 2 to use normal interrupt (active high/totempole-
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  56)  * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  57)  * drain
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  58)  */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  59) #define INT_TYPE	0
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  60) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  61) static char qlogic_name[] = "qlogic_cs";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  62) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  63) static struct scsi_host_template qlogicfas_driver_template = {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  64) 	.module			= THIS_MODULE,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  65) 	.name			= qlogic_name,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  66) 	.proc_name		= qlogic_name,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  67) 	.info			= qlogicfas408_info,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  68) 	.queuecommand		= qlogicfas408_queuecommand,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  69) 	.eh_abort_handler	= qlogicfas408_abort,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  70) 	.eh_host_reset_handler	= qlogicfas408_host_reset,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  71) 	.bios_param		= qlogicfas408_biosparam,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  72) 	.can_queue		= 1,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  73) 	.this_id		= -1,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  74) 	.sg_tablesize		= SG_ALL,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  75) 	.dma_boundary		= PAGE_SIZE - 1,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  76) };
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  77) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  78) /*====================================================================*/
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  79) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  80) typedef struct scsi_info_t {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  81) 	struct pcmcia_device	*p_dev;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  82) 	struct Scsi_Host *host;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  83) 	unsigned short manf_id;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  84) } scsi_info_t;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  85) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  86) static void qlogic_release(struct pcmcia_device *link);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  87) static void qlogic_detach(struct pcmcia_device *p_dev);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  88) static int qlogic_config(struct pcmcia_device * link);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  89) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  90) static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  91) 				struct pcmcia_device *link, int qbase, int qlirq)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  92) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  93) 	int qltyp;		/* type of chip */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  94) 	int qinitid;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  95) 	struct Scsi_Host *shost;	/* registered host structure */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  96) 	struct qlogicfas408_priv *priv;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  97) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  98) 	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  99) 	qinitid = host->this_id;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 100) 	if (qinitid < 0)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 101) 		qinitid = 7;	/* if no ID, use 7 */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 102) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 103) 	qlogicfas408_setup(qbase, qinitid, INT_TYPE);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 104) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 105) 	host->name = qlogic_name;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 106) 	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 107) 	if (!shost)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 108) 		goto err;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 109) 	shost->io_port = qbase;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 110) 	shost->n_io_port = 16;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 111) 	shost->dma_channel = -1;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 112) 	if (qlirq != -1)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 113) 		shost->irq = qlirq;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 114) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 115) 	priv = get_priv_by_host(shost);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 116) 	priv->qlirq = qlirq;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 117) 	priv->qbase = qbase;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 118) 	priv->qinitid = qinitid;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 119) 	priv->shost = shost;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 120) 	priv->int_type = INT_TYPE;					
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 121) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 122) 	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 123) 		goto free_scsi_host;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 124) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 125) 	sprintf(priv->qinfo,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 126) 		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 127) 		qltyp, qbase, qlirq, QL_TURBO_PDMA);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 128) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 129) 	if (scsi_add_host(shost, NULL))
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 130) 		goto free_interrupt;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 131) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 132) 	scsi_scan_host(shost);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 133) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 134) 	return shost;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 135) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 136) free_interrupt:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 137) 	free_irq(qlirq, shost);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 138) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 139) free_scsi_host:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 140) 	scsi_host_put(shost);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 141) 	
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 142) err:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 143) 	return NULL;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 144) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 145) static int qlogic_probe(struct pcmcia_device *link)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 146) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 147) 	scsi_info_t *info;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 148) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 149) 	dev_dbg(&link->dev, "qlogic_attach()\n");
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 150) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 151) 	/* Create new SCSI device */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 152) 	info = kzalloc(sizeof(*info), GFP_KERNEL);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 153) 	if (!info)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 154) 		return -ENOMEM;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 155) 	info->p_dev = link;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 156) 	link->priv = info;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 157) 	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 158) 	link->config_regs = PRESENT_OPTION;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 159) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 160) 	return qlogic_config(link);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 161) }				/* qlogic_attach */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 162) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 163) /*====================================================================*/
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 164) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 165) static void qlogic_detach(struct pcmcia_device *link)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 166) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 167) 	dev_dbg(&link->dev, "qlogic_detach\n");
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 168) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 169) 	qlogic_release(link);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 170) 	kfree(link->priv);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 171) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 172) }				/* qlogic_detach */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 173) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 174) /*====================================================================*/
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 175) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 176) static int qlogic_config_check(struct pcmcia_device *p_dev, void *priv_data)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 177) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 178) 	p_dev->io_lines = 10;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 179) 	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 180) 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 181) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 182) 	if (p_dev->resource[0]->start == 0)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 183) 		return -ENODEV;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 184) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 185) 	return pcmcia_request_io(p_dev);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 186) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 187) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 188) static int qlogic_config(struct pcmcia_device * link)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 189) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 190) 	scsi_info_t *info = link->priv;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 191) 	int ret;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 192) 	struct Scsi_Host *host;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 193) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 194) 	dev_dbg(&link->dev, "qlogic_config\n");
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 195) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 196) 	ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 197) 	if (ret)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 198) 		goto failed;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 199) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 200) 	if (!link->irq)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 201) 		goto failed;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 202) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 203) 	ret = pcmcia_enable_device(link);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 204) 	if (ret)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 205) 		goto failed;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 206) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 207) 	if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 208) 		/* set ATAcmd */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 209) 		outb(0xb4, link->resource[0]->start + 0xd);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 210) 		outb(0x24, link->resource[0]->start + 0x9);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 211) 		outb(0x04, link->resource[0]->start + 0xd);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 212) 	}
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 213) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 214) 	/* The KXL-810AN has a bigger IO port window */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 215) 	if (resource_size(link->resource[0]) == 32)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 216) 		host = qlogic_detect(&qlogicfas_driver_template, link,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 217) 			link->resource[0]->start + 16, link->irq);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 218) 	else
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 219) 		host = qlogic_detect(&qlogicfas_driver_template, link,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 220) 			link->resource[0]->start, link->irq);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 221) 	
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 222) 	if (!host) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 223) 		printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 224) 		goto failed;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 225) 	}
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 226) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 227) 	info->host = host;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 228) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 229) 	return 0;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 230) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 231) failed:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 232) 	pcmcia_disable_device(link);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 233) 	return -ENODEV;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 234) }				/* qlogic_config */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 235) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 236) /*====================================================================*/
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 237) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 238) static void qlogic_release(struct pcmcia_device *link)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 239) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 240) 	scsi_info_t *info = link->priv;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 241) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 242) 	dev_dbg(&link->dev, "qlogic_release\n");
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 243) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 244) 	scsi_remove_host(info->host);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 245) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 246) 	free_irq(link->irq, info->host);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 247) 	pcmcia_disable_device(link);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 248) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 249) 	scsi_host_put(info->host);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 250) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 251) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 252) /*====================================================================*/
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 253) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 254) static int qlogic_resume(struct pcmcia_device *link)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 255) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 256) 	scsi_info_t *info = link->priv;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 257) 	int ret;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 258) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 259) 	ret = pcmcia_enable_device(link);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 260) 	if (ret)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 261) 		return ret;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 262) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 263) 	if ((info->manf_id == MANFID_MACNICA) ||
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 264) 	    (info->manf_id == MANFID_PIONEER) ||
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 265) 	    (info->manf_id == 0x0098)) {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 266) 		outb(0x80, link->resource[0]->start + 0xd);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 267) 		outb(0x24, link->resource[0]->start + 0x9);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 268) 		outb(0x04, link->resource[0]->start + 0xd);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 269) 	}
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 270) 	/* Ugggglllyyyy!!! */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 271) 	qlogicfas408_host_reset(NULL);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 272) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 273) 	return 0;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 274) }
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 275) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 276) static const struct pcmcia_device_id qlogic_ids[] = {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 277) 	PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 278) 	PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 279) 	PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 280) 	PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 281) 	PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 282) 	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 283) 	PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 284) 	PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 285) 	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 286) 	PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 287) 	PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 288) 	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 289) 	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 290) 	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 291) 	/* these conflict with other cards! */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 292) 	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 293) 	/* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 294) 	PCMCIA_DEVICE_NULL,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 295) };
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 296) MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 297) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 298) static struct pcmcia_driver qlogic_cs_driver = {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 299) 	.owner		= THIS_MODULE,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 300) 	.name		= "qlogic_cs",
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 301) 	.probe		= qlogic_probe,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 302) 	.remove		= qlogic_detach,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 303) 	.id_table       = qlogic_ids,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 304) 	.resume		= qlogic_resume,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 305) };
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 306) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 307) MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 308) MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 309) MODULE_LICENSE("GPL");
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 310) module_pcmcia_driver(qlogic_cs_driver);