^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 1) # SPDX-License-Identifier: GPL-2.0-only
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 2) menu "Bus options (PCI, PCMCIA, EISA, GSC, ISA)"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 3)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 4) config GSC
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 5) bool "VSC/GSC/HSC bus support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 6) select HAVE_EISA
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 7) default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 8) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 9) The VSC, GSC and HSC busses were used from the earliest 700-series
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10) workstations up to and including the C360/J2240 workstations. They
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11) were also used in servers from the E-class to the K-class. They
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) are not found in B1000, C3000, J5000, A500, L1000, N4000 and upwards.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13) If in doubt, say "Y".
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) config HPPB
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) bool "HP-PB bus support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) depends on GSC
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) The HP-PB bus was used in the Nova class and K-class servers.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) If in doubt, say "Y"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 21)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 22) config IOMMU_CCIO
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 23) bool "U2/Uturn I/O MMU"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 24) depends on GSC
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 25) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 26) Say Y here to enable DMA management routines for the first
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 27) generation of PA-RISC cache-coherent machines. Programs the
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 28) U2/Uturn chip in "Virtual Mode" and use the I/O MMU.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 29)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 30) config GSC_LASI
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 31) bool "Lasi I/O support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 32) depends on GSC
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 33) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 34) Say Y here to support the Lasi multifunction chip found in
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 35) many PA-RISC workstations & servers. It includes interfaces
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 36) for a parallel port, serial port, NCR 53c710 SCSI, Apricot
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 37) Ethernet, Harmony audio, PS/2 keyboard & mouse, ISDN, telephony
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 38) and floppy. Note that you must still enable all the individual
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 39) drivers for these chips.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 40)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 41) config GSC_WAX
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 42) bool "Wax I/O support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 43) depends on GSC
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 44) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 45) Say Y here to support the Wax multifunction chip found in some
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 46) older systems, including B/C/D/R class and 715/64, 715/80 and
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 47) 715/100. Wax includes an EISA adapter, a serial port (not always
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 48) used), a HIL interface chip and is also known to be used as the
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 49) GSC bridge for an X.25 GSC card.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 50)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 51) config ISA
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 52) bool "ISA support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 53) depends on EISA
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 54) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 55) If you want to plug an ISA card into your EISA bus, say Y here.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 56) Most people should say N.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 57)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 58) config GSC_DINO
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 59) bool "GSCtoPCI/Dino PCI support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 60) depends on PCI && GSC
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 61) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 62) Say Y here to support the Dino & Cujo GSC to PCI bridges found in
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 63) machines from the B132 to the C360, the J2240 and the A180. Some
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 64) GSC/HSC cards (eg gigabit & dual 100 Mbit Ethernet) have a Dino on
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 65) the card, and you also need to say Y here if you have such a card.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 66) Note that Dino also supplies one of the serial ports on certain
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 67) machines. If in doubt, say Y.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 68)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 69) config PCI_LBA
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 70) bool "LBA/Elroy PCI support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 71) depends on PCI
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 72) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 73) Say Y here to support the Elroy PCI Lower Bus Adapter. This is
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 74) present on B, C, J, L and N-class machines with 4-digit model
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 75) numbers and the A400/A500.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 76)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 77) config IOSAPIC
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 78) bool
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 79) depends on PCI_LBA
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 80) default PCI_LBA
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 81)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 82) config IOMMU_SBA
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 83) bool
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 84) depends on PCI_LBA
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 85) default PCI_LBA
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 86)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 87) endmenu
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 88)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 89) menu "PA-RISC specific drivers"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 90)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 91) config SUPERIO
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 92) bool "SuperIO (SuckyIO) support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 93) depends on PCI_LBA
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 94) default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 95) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 96) Say Y here to support the SuperIO chip found in Bxxxx, C3xxx and
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 97) J5xxx+ machines. This enables IDE, Floppy, Parallel Port, and
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 98) Serial port on those machines.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 99)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 100) config CHASSIS_LCD_LED
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 101) bool "Chassis LCD and LED support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 102) default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 103) select VM_EVENT_COUNTERS
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 104) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 105) Say Y here if you want to enable support for the Heartbeat,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 106) Disk/Network activities LEDs on some PA-RISC machines,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 107) or support for the LCD that can be found on recent material.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 108)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 109) This has nothing to do with LED State support for A and E class.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 110)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 111) If unsure, say Y.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 112)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 113) config PDC_CHASSIS
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 114) bool "PDC chassis state codes support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 115) default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 116) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 117) Say Y here if you want to enable support for Chassis codes.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 118) That includes support for LED State front panel as found on E
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 119) class, and support for the GSP Virtual Front Panel (LED State and
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 120) message logging) as found on high end servers such as A, L and
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 121) N-class.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 122) This driver will also display progress messages on LCD display,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 123) such as "INI", "RUN" and "FLT", and might thus clobber messages
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 124) shown by the LED/LCD driver.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 125) This driver updates the state panel (LED and/or LCD) upon system
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 126) state change (eg: boot, shutdown or panic).
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 127)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 128) If unsure, say Y.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 129)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 130)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 131) config PDC_CHASSIS_WARN
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 132) bool "PDC chassis warnings support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 133) depends on PROC_FS
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 134) default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 135) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 136) Say Y here if you want to enable support for Chassis warnings.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 137) This will add a proc entry '/proc/chassis' giving some information
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 138) about the overall health state of the system.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 139) This includes NVRAM battery level, overtemp or failures such as
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 140) fans or power units.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 141)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 142) If unsure, say Y.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 143)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 144)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 145) config PDC_STABLE
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 146) tristate "PDC Stable Storage support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 147) depends on SYSFS
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 148) default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 149) help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 150) Say Y here if you want to enable support for accessing Stable Storage
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 151) variables (PDC non volatile variables such as Primary Boot Path,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 152) Console Path, Autoboot, Autosearch, etc) through SysFS.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 153)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 154) If unsure, say Y.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 155)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 156) To compile this driver as a module, choose M here.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 157) The module will be called pdc_stable.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 158)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 159) endmenu
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags