Orange Pi5 kernel

/******************************************************************************
 *
 * Copyright(c) 2007 - 2017 Realtek Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 *****************************************************************************/

/* ************************************************************
 * include files
 * ************************************************************ */
#include "mp_precomp.h"
#include "phydm_precomp.h"

void
phydm_dynamic_tx_power_init(
	void					*p_dm_void
)
{
	struct PHY_DM_STRUCT		*p_dm = (struct PHY_DM_STRUCT *)p_dm_void;
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
	struct _ADAPTER	*adapter = p_dm->adapter;
	PMGNT_INFO			p_mgnt_info = &adapter->MgntInfo;
	HAL_DATA_TYPE		*p_hal_data = GET_HAL_DATA(adapter);

	/*if (!IS_HARDWARE_TYPE_8814A(adapter)) {*/
	/*	PHYDM_DBG(p_dm,DBG_DYN_TXPWR, */
	/*	("phydm_dynamic_tx_power_init DynamicTxPowerEnable=%d\n", p_mgnt_info->is_dynamic_tx_power_enable));*/
	/*	return;*/
	/*} else*/
	{
		p_mgnt_info->bDynamicTxPowerEnable = true;
		PHYDM_DBG(p_dm, DBG_DYN_TXPWR,
			("phydm_dynamic_tx_power_init DynamicTxPowerEnable=%d\n", p_mgnt_info->bDynamicTxPowerEnable));
	}

#if DEV_BUS_TYPE == RT_USB_INTERFACE
	if (RT_GetInterfaceSelection(adapter) == INTF_SEL1_USB_High_Power) {
		odm_dynamic_tx_power_save_power_index(p_dm);
		p_mgnt_info->bDynamicTxPowerEnable = true;
	} else
#else
	/* so 92c pci do not need dynamic tx power? vivi check it later */
	p_mgnt_info->bDynamicTxPowerEnable = false;
#endif


		p_hal_data->LastDTPLvl = tx_high_pwr_level_normal;
	p_hal_data->DynamicTxHighPowerLvl = tx_high_pwr_level_normal;

#elif (DM_ODM_SUPPORT_TYPE == ODM_CE)

	p_dm->last_dtp_lvl = tx_high_pwr_level_normal;
	p_dm->dynamic_tx_high_power_lvl = tx_high_pwr_level_normal;
	p_dm->tx_agc_ofdm_18_6 = odm_get_bb_reg(p_dm, 0xC24, MASKDWORD); /*TXAGC {18M 12M 9M 6M}*/

#endif

}

void
odm_dynamic_tx_power_save_power_index(
	void					*p_dm_void
)
{
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
	struct PHY_DM_STRUCT		*p_dm = (struct PHY_DM_STRUCT *)p_dm_void;
	u8		index;
	u32		power_index_reg[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a};

#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
	struct _ADAPTER	*adapter = p_dm->adapter;
	HAL_DATA_TYPE	*p_hal_data = GET_HAL_DATA(adapter);
	for (index = 0; index < 6; index++)
		p_hal_data->PowerIndex_backup[index] = PlatformEFIORead1Byte(adapter, power_index_reg[index]);


#endif
#endif
}

void
odm_dynamic_tx_power_restore_power_index(
	void					*p_dm_void
)
{
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
	struct PHY_DM_STRUCT		*p_dm = (struct PHY_DM_STRUCT *)p_dm_void;
	u8			index;
	struct _ADAPTER		*adapter = p_dm->adapter;
	HAL_DATA_TYPE	*p_hal_data = GET_HAL_DATA(adapter);
	u32			power_index_reg[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a};

	for (index = 0; index < 6; index++)
		PlatformEFIOWrite1Byte(adapter, power_index_reg[index], p_hal_data->PowerIndex_backup[index]);



#endif
}

void
odm_dynamic_tx_power_write_power_index(
	void					*p_dm_void,
	u8		value)
{
	struct PHY_DM_STRUCT		*p_dm = (struct PHY_DM_STRUCT *)p_dm_void;
	u8			index;
	u32			power_index_reg[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a};

	for (index = 0; index < 6; index++)
		/* platform_efio_write_1byte(adapter, power_index_reg[index], value); */
		odm_write_1byte(p_dm, power_index_reg[index], value);

}

void
odm_dynamic_tx_power_nic_ce(
	void					*p_dm_void
)
{
#if (DM_ODM_SUPPORT_TYPE & (ODM_CE))
#if (RTL8821A_SUPPORT == 1)
	struct PHY_DM_STRUCT		*p_dm = (struct PHY_DM_STRUCT *)p_dm_void;
	u8			val;
	u8			rssi_tmp = p_dm->rssi_min;

	if (!(p_dm->support_ability & ODM_BB_DYNAMIC_TXPWR))
		return;

	if (rssi_tmp >= TX_POWER_NEAR_FIELD_THRESH_LVL2) {
		p_dm->dynamic_tx_high_power_lvl = tx_high_pwr_level_level2;
		/**/
	} else if (rssi_tmp >= TX_POWER_NEAR_FIELD_THRESH_LVL1) {
		p_dm->dynamic_tx_high_power_lvl = tx_high_pwr_level_level1;
		/**/
	} else if (rssi_tmp < (TX_POWER_NEAR_FIELD_THRESH_LVL1 - 5)) {
		p_dm->dynamic_tx_high_power_lvl = tx_high_pwr_level_normal;
		/**/
	}

	if (p_dm->last_dtp_lvl != p_dm->dynamic_tx_high_power_lvl) {

		PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("update_DTP_lv: ((%d)) -> ((%d))\n", p_dm->last_dtp_lvl, p_dm->dynamic_tx_high_power_lvl));

		p_dm->last_dtp_lvl = p_dm->dynamic_tx_high_power_lvl;

		if (p_dm->support_ic_type & (ODM_RTL8821)) {

			if (p_dm->dynamic_tx_high_power_lvl == tx_high_pwr_level_level2) {

				odm_set_mac_reg(p_dm, 0x6D8, BIT(20) | BIT19 | BIT18, 1); /* Resp TXAGC offset = -3dB*/

				val = p_dm->tx_agc_ofdm_18_6 & 0xff;
				if (val >= 0x20)
					val -= 0x16;

				odm_set_bb_reg(p_dm, 0xC24, 0xff, val);
				PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("Set TX power: level 2\n"));
			} else if (p_dm->dynamic_tx_high_power_lvl == tx_high_pwr_level_level1) {

				odm_set_mac_reg(p_dm, 0x6D8, BIT(20) | BIT19 | BIT18, 1); /* Resp TXAGC offset = -3dB*/

				val = p_dm->tx_agc_ofdm_18_6 & 0xff;
				if (val >= 0x20)
					val -= 0x10;

				odm_set_bb_reg(p_dm, 0xC24, 0xff, val);
				PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("Set TX power: level 1\n"));
			} else if (p_dm->dynamic_tx_high_power_lvl == tx_high_pwr_level_normal) {

				odm_set_mac_reg(p_dm, 0x6D8, BIT(20) | BIT19 | BIT18, 0); /* Resp TXAGC offset = 0dB*/
				odm_set_bb_reg(p_dm, 0xC24, MASKDWORD, p_dm->tx_agc_ofdm_18_6);
				PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("Set TX power: normal\n"));
			}
		}
	}

#endif
#endif
}


void
odm_dynamic_tx_power(
	void					*p_dm_void
)
{
	/*  */
	/* For AP/ADSL use struct rtl8192cd_priv* */
	/* For CE/NIC use struct _ADAPTER* */
	/*  */
	/* struct _ADAPTER*		p_adapter = p_dm->adapter;
	*	struct rtl8192cd_priv*	priv		= p_dm->priv; */
	struct PHY_DM_STRUCT		*p_dm = (struct PHY_DM_STRUCT *)p_dm_void;

	if (!(p_dm->support_ability & ODM_BB_DYNAMIC_TXPWR))
		return;
	/*  */
	/* 2011/09/29 MH In HW integration first stage, we provide 4 different handle to operate */
	/* at the same time. In the stage2/3, we need to prive universal interface and merge all */
	/* HW dynamic mechanism. */
	/*  */
	switch	(p_dm->support_platform) {
	case	ODM_WIN:
		odm_dynamic_tx_power_nic(p_dm);
		break;
	case	ODM_CE:
		odm_dynamic_tx_power_nic_ce(p_dm);
		break;
	default:
		break;
	}


}


void
odm_dynamic_tx_power_nic(
	void					*p_dm_void
)
{
	struct PHY_DM_STRUCT		*p_dm = (struct PHY_DM_STRUCT *)p_dm_void;

	if (!(p_dm->support_ability & ODM_BB_DYNAMIC_TXPWR))
		return;

#if (DM_ODM_SUPPORT_TYPE & ODM_WIN)

	if (p_dm->support_ic_type == ODM_RTL8814A)
		odm_dynamic_tx_power_8814a(p_dm);
	else if (p_dm->support_ic_type & ODM_RTL8821) {
		struct _ADAPTER		*adapter	 =  p_dm->adapter;
		PMGNT_INFO		p_mgnt_info = GetDefaultMgntInfo(adapter);

		if (p_mgnt_info->RegRspPwr == 1)	{
			if (p_dm->rssi_min > 60)
				odm_set_mac_reg(p_dm, ODM_REG_RESP_TX_11AC, BIT(20) | BIT19 | BIT18, 1); /*Resp TXAGC offset = -3dB*/
			else if (p_dm->rssi_min < 55)
				odm_set_mac_reg(p_dm, ODM_REG_RESP_TX_11AC, BIT(20) | BIT19 | BIT18, 0); /*Resp TXAGC offset = 0dB*/
		}
	}
#endif
}


void
odm_dynamic_tx_power_8821(
	void			*p_dm_void,
	u8			*p_desc,
	u8			mac_id
)
{
#if (RTL8821A_SUPPORT == 1)
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
	struct PHY_DM_STRUCT		*p_dm = (struct PHY_DM_STRUCT *)p_dm_void;
	struct cmn_sta_info		*p_entry;
	u8			reg0xc56_byte;
	u8			txpwr_offset = 0;

	p_entry = p_dm->p_phydm_sta_info[mac_id];

	reg0xc56_byte = odm_read_1byte(p_dm, 0xc56);

	PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("reg0xc56_byte=%d\n", reg0xc56_byte));

	if (p_entry[mac_id].rssi_stat.rssi > 85) {

		/* Avoid TXAGC error after TX power offset is applied.
		For example: Reg0xc56=0x6, if txpwr_offset=3( reduce 11dB )
		Total power = 6-11= -5( overflow!! ), PA may be burned !
		so txpwr_offset should be adjusted by Reg0xc56*/

		if (reg0xc56_byte < 7)
			txpwr_offset = 1;
		else if (reg0xc56_byte < 11)
			txpwr_offset = 2;
		else
			txpwr_offset = 3;

		SET_TX_DESC_TX_POWER_OFFSET_8812(p_desc, txpwr_offset);
		PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("odm_dynamic_tx_power_8821: RSSI=%d, txpwr_offset=%d\n", p_entry[mac_id].rssi_stat.rssi, txpwr_offset));

	} else {
		SET_TX_DESC_TX_POWER_OFFSET_8812(p_desc, txpwr_offset);
		PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("odm_dynamic_tx_power_8821: RSSI=%d, txpwr_offset=%d\n", p_entry[mac_id].rssi_stat.rssi, txpwr_offset));

	}
#endif	/*#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)*/
#endif	/*#if (RTL8821A_SUPPORT==1)*/
}

#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
void
odm_dynamic_tx_power_8814a(
	void					*p_dm_void
)
{
	struct PHY_DM_STRUCT		*p_dm = (struct PHY_DM_STRUCT *)p_dm_void;
	struct _ADAPTER *adapter = p_dm->adapter;
	PMGNT_INFO			p_mgnt_info = &adapter->MgntInfo;
	HAL_DATA_TYPE		*p_hal_data = GET_HAL_DATA(adapter);
	s32				undecorated_smoothed_pwdb;

	PHYDM_DBG(p_dm, DBG_DYN_TXPWR,
		("TxLevel=%d p_mgnt_info->iot_action=%x p_mgnt_info->is_dynamic_tx_power_enable=%d\n",
		p_hal_data->DynamicTxHighPowerLvl, p_mgnt_info->IOTAction, p_mgnt_info->bDynamicTxPowerEnable));

	/*STA not connected and AP not connected*/
	if ((!p_mgnt_info->bMediaConnect) && (p_hal_data->EntryMinUndecoratedSmoothedPWDB == 0)) {
		PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("Not connected to any reset power lvl\n"));
		p_hal_data->DynamicTxHighPowerLvl = tx_high_pwr_level_normal;
		return;
	}


	if ((p_mgnt_info->bDynamicTxPowerEnable != true) || p_mgnt_info->IOTAction & HT_IOT_ACT_DISABLE_HIGH_POWER)
		p_hal_data->DynamicTxHighPowerLvl = tx_high_pwr_level_normal;
	else {
		if (p_mgnt_info->bMediaConnect) {	/*Default port*/
			if (ACTING_AS_AP(adapter) || ACTING_AS_IBSS(adapter)) {
				undecorated_smoothed_pwdb = p_hal_data->EntryMinUndecoratedSmoothedPWDB;
				PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("AP Client PWDB = 0x%x\n", undecorated_smoothed_pwdb));
			} else {
				undecorated_smoothed_pwdb = p_hal_data->UndecoratedSmoothedPWDB;
				PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("STA Default Port PWDB = 0x%x\n", undecorated_smoothed_pwdb));
			}
		} else {/*associated entry pwdb*/
			undecorated_smoothed_pwdb = p_hal_data->EntryMinUndecoratedSmoothedPWDB;
			PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("AP Ext Port PWDB = 0x%x\n", undecorated_smoothed_pwdb));
		}

		/*Should we separate as 2.4G/5G band?*/

		if (undecorated_smoothed_pwdb >= TX_POWER_NEAR_FIELD_THRESH_LVL2) {
			p_hal_data->DynamicTxHighPowerLvl = tx_high_pwr_level_level2;
			PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("tx_high_pwr_level_level1 (TxPwr=0x0)\n"));
		} else if ((undecorated_smoothed_pwdb < (TX_POWER_NEAR_FIELD_THRESH_LVL2 - 3)) &&
			(undecorated_smoothed_pwdb >= TX_POWER_NEAR_FIELD_THRESH_LVL1)) {
			p_hal_data->DynamicTxHighPowerLvl = tx_high_pwr_level_level1;
			PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("tx_high_pwr_level_level1 (TxPwr=0x10)\n"));
		} else if (undecorated_smoothed_pwdb < (TX_POWER_NEAR_FIELD_THRESH_LVL1 - 5)) {
			p_hal_data->DynamicTxHighPowerLvl = tx_high_pwr_level_normal;
			PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("tx_high_pwr_level_normal\n"));
		}
	}


	if (p_hal_data->DynamicTxHighPowerLvl != p_hal_data->LastDTPLvl) {
		PHYDM_DBG(p_dm, DBG_DYN_TXPWR, ("odm_dynamic_tx_power_8814a() channel = %d\n", p_hal_data->CurrentChannel));
		odm_set_tx_power_level8814(adapter, p_hal_data->CurrentChannel, p_hal_data->DynamicTxHighPowerLvl);
	}


	PHYDM_DBG(p_dm, DBG_DYN_TXPWR,
		("odm_dynamic_tx_power_8814a() channel = %d  TXpower lvl=%d/%d\n",
		p_hal_data->CurrentChannel, p_hal_data->LastDTPLvl, p_hal_data->DynamicTxHighPowerLvl));

	p_hal_data->LastDTPLvl = p_hal_data->DynamicTxHighPowerLvl;

}



/**/
/*For normal driver we always use the FW method to configure TX power index to reduce I/O transaction.*/
/**/
/**/
void
odm_set_tx_power_level8814(
	struct _ADAPTER		*adapter,
	u8			channel,
	u8			pwr_lvl
)
{
#if (DEV_BUS_TYPE == RT_USB_INTERFACE)
	u32			i, j, k = 0;
	u32			value[264] = {0};
	u32			path = 0, power_index, txagc_table_wd = 0x00801000;

	HAL_DATA_TYPE	*p_hal_data = GET_HAL_DATA(adapter);

	u8	jaguar2_rates[][4] = { {MGN_1M, MGN_2M, MGN_5_5M, MGN_11M},
		{MGN_6M, MGN_9M, MGN_12M, MGN_18M},
		{MGN_24M, MGN_36M, MGN_48M, MGN_54M},
		{MGN_MCS0, MGN_MCS1, MGN_MCS2, MGN_MCS3},
		{MGN_MCS4, MGN_MCS5, MGN_MCS6, MGN_MCS7},
		{MGN_MCS8, MGN_MCS9, MGN_MCS10, MGN_MCS11},
		{MGN_MCS12, MGN_MCS13, MGN_MCS14, MGN_MCS15},
		{MGN_MCS16, MGN_MCS17, MGN_MCS18, MGN_MCS19},
		{MGN_MCS20, MGN_MCS21, MGN_MCS22, MGN_MCS23},
		{MGN_VHT1SS_MCS0, MGN_VHT1SS_MCS1, MGN_VHT1SS_MCS2, MGN_VHT1SS_MCS3},
		{MGN_VHT1SS_MCS4, MGN_VHT1SS_MCS5, MGN_VHT1SS_MCS6, MGN_VHT1SS_MCS7},
		{MGN_VHT2SS_MCS8, MGN_VHT2SS_MCS9, MGN_VHT2SS_MCS0, MGN_VHT2SS_MCS1},
		{MGN_VHT2SS_MCS2, MGN_VHT2SS_MCS3, MGN_VHT2SS_MCS4, MGN_VHT2SS_MCS5},
		{MGN_VHT2SS_MCS6, MGN_VHT2SS_MCS7, MGN_VHT2SS_MCS8, MGN_VHT2SS_MCS9},
		{MGN_VHT3SS_MCS0, MGN_VHT3SS_MCS1, MGN_VHT3SS_MCS2, MGN_VHT3SS_MCS3},
		{MGN_VHT3SS_MCS4, MGN_VHT3SS_MCS5, MGN_VHT3SS_MCS6, MGN_VHT3SS_MCS7},
		{MGN_VHT3SS_MCS8, MGN_VHT3SS_MCS9, 0, 0}
	};

	for (path = RF_PATH_A; path <= RF_PATH_D; ++path) {

		u8	usb_host = UsbModeQueryHubUsbType(adapter);
		u8	usb_rfset = UsbModeQueryRfSet(adapter);
		u8	usb_rf_type = RT_GetRFType(adapter);

		for (i = 0; i <= 16; i++) {
			for (j = 0; j <= 3; j++) {
				if (jaguar2_rates[i][j] == 0)
					continue;

				txagc_table_wd =  0x00801000;
				power_index = (u32) PHY_GetTxPowerIndex(adapter, (u8)path, jaguar2_rates[i][j], p_hal_data->CurrentChannelBW, channel);

				/*for Query bus type to recude tx power.*/
				if (usb_host != USB_MODE_U3 && usb_rfset == 1 && IS_HARDWARE_TYPE_8814AU(adapter) && usb_rf_type == RF_3T3R) {
					if (channel <= 14) {
						if (power_index >= 16)
							power_index -= 16;
						else
							power_index = 0;
					} else
						power_index = 0;
				}

				if (pwr_lvl == tx_high_pwr_level_level1) {
					if (power_index >= 0x10)
						power_index -= 0x10;
					else
						power_index = 0;
				} else if (pwr_lvl == tx_high_pwr_level_level2)
					power_index = 0;

				txagc_table_wd |= (path << 8) | MRateToHwRate(jaguar2_rates[i][j]) | (power_index << 24);

				PHY_SetTxPowerIndexShadow(adapter, (u8)power_index, (u8)path, jaguar2_rates[i][j]);

				value[k++] = txagc_table_wd;
			}
		}
	}

	if (adapter->MgntInfo.bScanInProgress == false &&  adapter->MgntInfo.RegFWOffload == 2)
		HalDownloadTxPowerLevel8814(adapter, value);
#endif
}
#endif