/******************************************************************************
*
* Copyright(c) 2007 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#define _HCI_HAL_INIT_C_
/* #include <drv_types.h> */
#include <rtl8812a_hal.h>
#ifndef CONFIG_USB_HCI
#error "CONFIG_USB_HCI shall be on!\n"
#endif
static void _dbg_dump_macreg(_adapter *padapter)
{
u32 offset = 0;
u32 val32 = 0;
u32 index = 0 ;
for (index = 0; index < 64; index++) {
offset = index * 4;
val32 = rtw_read32(padapter, offset);
RTW_INFO("offset : 0x%02x ,val:0x%08x\n", offset, val32);
}
}
static VOID
_ConfigChipOutEP_8812(
IN PADAPTER pAdapter,
IN u8 NumOutPipe
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
pHalData->OutEpQueueSel = 0;
pHalData->OutEpNumber = 0;
switch (NumOutPipe) {
case 4:
pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_LQ | TX_SELE_NQ | TX_SELE_EQ;
pHalData->OutEpNumber = 4;
break;
case 3:
pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_LQ | TX_SELE_NQ;
pHalData->OutEpNumber = 3;
break;
case 2:
pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_NQ;
pHalData->OutEpNumber = 2;
break;
case 1:
pHalData->OutEpQueueSel = TX_SELE_HQ;
pHalData->OutEpNumber = 1;
break;
default:
break;
}
RTW_INFO("%s OutEpQueueSel(0x%02x), OutEpNumber(%d)\n", __FUNCTION__, pHalData->OutEpQueueSel, pHalData->OutEpNumber);
}
static VOID _FourOutPipeMapping88212AU(
IN PADAPTER pAdapter,
IN BOOLEAN bWIFICfg
)
{
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(pAdapter);
if (bWIFICfg) { /* for WMM */
/* 0:H, 1:N, 2:L ,3:E */
pdvobjpriv->Queue2Pipe[0] = pdvobjpriv->RtOutPipe[0];/* VO */
pdvobjpriv->Queue2Pipe[1] = pdvobjpriv->RtOutPipe[1];/* VI */
pdvobjpriv->Queue2Pipe[2] = pdvobjpriv->RtOutPipe[2];/* BE */
pdvobjpriv->Queue2Pipe[3] = pdvobjpriv->RtOutPipe[1];/* BK */
pdvobjpriv->Queue2Pipe[4] = pdvobjpriv->RtOutPipe[0];/* BCN */
pdvobjpriv->Queue2Pipe[5] = pdvobjpriv->RtOutPipe[0];/* MGT */
pdvobjpriv->Queue2Pipe[6] = pdvobjpriv->RtOutPipe[3];/* HIGH */
pdvobjpriv->Queue2Pipe[7] = pdvobjpriv->RtOutPipe[0];/* TXCMD */
} else { /* typical setting */
/* 0:H, 1:N, 2:L, 3:E */
pdvobjpriv->Queue2Pipe[0] = pdvobjpriv->RtOutPipe[1];/* VO */
pdvobjpriv->Queue2Pipe[1] = pdvobjpriv->RtOutPipe[1];/* VI */
pdvobjpriv->Queue2Pipe[2] = pdvobjpriv->RtOutPipe[2];/* BE */
pdvobjpriv->Queue2Pipe[3] = pdvobjpriv->RtOutPipe[2];/* BK */
pdvobjpriv->Queue2Pipe[4] = pdvobjpriv->RtOutPipe[0];/* BCN */
pdvobjpriv->Queue2Pipe[5] = pdvobjpriv->RtOutPipe[3];/* MGT */
pdvobjpriv->Queue2Pipe[6] = pdvobjpriv->RtOutPipe[0];/* HIGH */
pdvobjpriv->Queue2Pipe[7] = pdvobjpriv->RtOutPipe[3];/* TXCMD */
}
}
static BOOLEAN HalUsbSetQueuePipeMapping8812AUsb(
IN PADAPTER pAdapter,
IN u8 NumInPipe,
IN u8 NumOutPipe
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
BOOLEAN result = _FALSE;
struct registry_priv *pregistrypriv = &pAdapter->registrypriv;
BOOLEAN bWIFICfg = (pregistrypriv->wifi_spec) ? _TRUE : _FALSE;
_ConfigChipOutEP_8812(pAdapter, NumOutPipe);
/* Normal chip with one IN and one OUT doesn't have interrupt IN EP. */
if (1 == pHalData->OutEpNumber) {
if (1 != NumInPipe)
return result;
}
/* All config other than above support one Bulk IN and one Interrupt IN. */
/* if(2 != NumInPipe){ */
/* return result; */
/* } */
if (NumOutPipe == 4) {
result = _TRUE;
_FourOutPipeMapping88212AU(pAdapter, bWIFICfg);
} else
result = Hal_MappingOutPipe(pAdapter, NumOutPipe);
return result;
}
void rtl8812au_interface_configure(_adapter *padapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
if (IS_SUPER_SPEED_USB(padapter)) {
pHalData->UsbBulkOutSize = USB_SUPER_SPEED_BULK_SIZE;/* 1024 bytes */
} else if (IS_HIGH_SPEED_USB(padapter)) {
pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;/* 512 bytes */
} else {
pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;/* 64 bytes */
}
pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber;
#ifdef CONFIG_USB_TX_AGGREGATION
pHalData->UsbTxAggMode = 1;
pHalData->UsbTxAggDescNum = 6; /* only 4 bits */
if (IS_HARDWARE_TYPE_8812AU(padapter)) /* page added for Jaguar */
pHalData->UsbTxAggDescNum = 0x01 ; /* adjust value for OQT Overflow issue */ /* 0x3; */ /* only 4 bits */
#endif
#ifdef CONFIG_USB_RX_AGGREGATION
if (IS_HARDWARE_TYPE_8812AU(padapter))
pHalData->rxagg_mode = RX_AGG_USB;
else
pHalData->rxagg_mode = RX_AGG_USB; /* todo: change to USB_RX_AGG_DMA */
pHalData->rxagg_usb_size = 8; /* unit: 512b */
pHalData->rxagg_usb_timeout = 0x6;
pHalData->rxagg_dma_size = 16; /* uint: 128b, 0x0A = 10 = MAX_RX_DMA_BUFFER_SIZE/2/pHalData->UsbBulkOutSize */
pHalData->rxagg_dma_timeout = 0x6; /* 6, absolute time = 34ms/(2^6) */
if (IS_SUPER_SPEED_USB(padapter)) {
pHalData->rxagg_usb_size = 0x7;
pHalData->rxagg_usb_timeout = 0x1a;
} else {
/* the setting to reduce RX FIFO overflow on USB2.0 and increase rx throughput */
#ifdef CONFIG_PREALLOC_RX_SKB_BUFFER
u32 remainder = 0;
u8 quotient = 0;
remainder = MAX_RECVBUF_SZ % (4 * 1024);
quotient = (u8)(MAX_RECVBUF_SZ >> 12);
if (quotient > 5) {
pHalData->rxagg_usb_size = 0x5;
pHalData->rxagg_usb_timeout = 0x20;
} else {
if (remainder >= 2048) {
pHalData->rxagg_usb_size = quotient;
pHalData->rxagg_usb_timeout = 0x10;
} else {
pHalData->rxagg_usb_size = (quotient - 1);
pHalData->rxagg_usb_timeout = 0x10;
}
}
#else /* !CONFIG_PREALLOC_RX_SKB_BUFFER */
pHalData->rxagg_usb_size = 0x5;
pHalData->rxagg_usb_timeout = 0x20;
#endif /* CONFIG_PREALLOC_RX_SKB_BUFFER */
}
#endif /* CONFIG_USB_RX_AGGREGATION */
HalUsbSetQueuePipeMapping8812AUsb(padapter,
pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes);
}
static VOID
_InitBurstPktLen(IN PADAPTER Adapter)
{
u1Byte speedvalue, provalue, temp;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
/* rtw_write16(Adapter, REG_TRXDMA_CTRL_8195, 0xf5b0); */
/* rtw_write16(Adapter, REG_TRXDMA_CTRL_8812, 0xf5b4); */
rtw_write8(Adapter, 0xf050, 0x01); /* usb3 rx interval */
rtw_write16(Adapter, REG_RXDMA_STATUS, 0x7400); /* burset lenght=4, set 0x3400 for burset length=2 */
rtw_write8(Adapter, 0x289, 0xf5); /* for rxdma control */
/* rtw_write8(Adapter, 0x3a, 0x46); */
/* 0x456 = 0x70, sugguested by Zhilin */
if (IS_HARDWARE_TYPE_8821U(Adapter))
rtw_write8(Adapter, REG_AMPDU_MAX_TIME_8812, 0x5e);
else
rtw_write8(Adapter, REG_AMPDU_MAX_TIME_8812, 0x70);
rtw_write32(Adapter, REG_AMPDU_MAX_LENGTH_8812, 0xffffffff);
rtw_write8(Adapter, REG_USTIME_TSF, 0x50);
rtw_write8(Adapter, REG_USTIME_EDCA, 0x50);
if (IS_HARDWARE_TYPE_8821U(Adapter))
speedvalue = BIT7;
else
speedvalue = rtw_read8(Adapter, 0xff); /* check device operation speed: SS 0xff bit7 */
if (speedvalue & BIT7) { /* USB2/1.1 Mode */
temp = rtw_read8(Adapter, 0xfe17);
if (((temp >> 4) & 0x03) == 0) {
pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;
provalue = rtw_read8(Adapter, REG_RXDMA_PRO_8812);
rtw_write8(Adapter, REG_RXDMA_PRO_8812, ((provalue | BIT(4) | BIT(3) | BIT(2) | BIT(1)) & (~BIT(5)))); /* set burst pkt len=512B */
} else {
pHalData->UsbBulkOutSize = 64;
provalue = rtw_read8(Adapter, REG_RXDMA_PRO_8812);
rtw_write8(Adapter, REG_RXDMA_PRO_8812, ((provalue | BIT(5) | BIT(3) | BIT(2) | BIT(1)) & (~BIT(4)))); /* set burst pkt len=64B */
}
/* rtw_write8(Adapter, 0x10c, 0xb4); */
/* hal_UphyUpdate8812AU(Adapter); */
pHalData->bSupportUSB3 = _FALSE;
} else { /* USB3 Mode */
pHalData->UsbBulkOutSize = USB_SUPER_SPEED_BULK_SIZE;
provalue = rtw_read8(Adapter, REG_RXDMA_PRO_8812);
rtw_write8(Adapter, REG_RXDMA_PRO_8812, ((provalue | BIT(3) | BIT(2) | BIT(1)) & (~(BIT5 | BIT4)))); /* set burst pkt len=1k */
/* PlatformEFIOWrite2Byte(Adapter, REG_RXDMA_AGG_PG_TH,0x0a05); */ /* dmc agg th 20K */
pHalData->bSupportUSB3 = _TRUE;
/* set Reg 0xf008[3:4] to 2'00 to disable U1/U2 Mode to avoid 2.5G spur in USB3.0. added by page, 20120712 */
rtw_write8(Adapter, 0xf008, rtw_read8(Adapter, 0xf008) & 0xE7);
}
#ifdef CONFIG_USB_TX_AGGREGATION
/* rtw_write8(Adapter, REG_TDECTRL_8195, 0x30); */
#else
rtw_write8(Adapter, REG_TDECTRL, 0x10);
#endif
temp = rtw_read8(Adapter, REG_SYS_FUNC_EN);
rtw_write8(Adapter, REG_SYS_FUNC_EN, temp & (~BIT(10))); /* reset 8051 */
rtw_write8(Adapter, REG_HT_SINGLE_AMPDU_8812, rtw_read8(Adapter, REG_HT_SINGLE_AMPDU_8812) | BIT(7)); /* enable single pkt ampdu */
rtw_write8(Adapter, REG_RX_PKT_LIMIT, 0x18); /* for VHT packet length 11K */
rtw_write8(Adapter, REG_PIFS, 0x00);
if (IS_HARDWARE_TYPE_8821U(Adapter) && (Adapter->registrypriv.wifi_spec == _FALSE)) {
/* 0x0a0a too small , it can't pass AC logo. change to 0x1f1f */
rtw_write16(Adapter, REG_MAX_AGGR_NUM, 0x1f1f);
rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, 0x80);
rtw_write32(Adapter, REG_FAST_EDCA_CTRL, 0x03087777);
} else {
rtw_write16(Adapter, REG_MAX_AGGR_NUM, 0x1f1f);
rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, rtw_read8(Adapter, REG_FWHW_TXQ_CTRL) & (~BIT(7)));
}
if (pHalData->AMPDUBurstMode)
rtw_write8(Adapter, REG_AMPDU_BURST_MODE_8812, 0x5F);
rtw_write8(Adapter, 0x1c, rtw_read8(Adapter, 0x1c) | BIT(5) | BIT(6)); /* to prevent mac is reseted by bus. 20111208, by Page */
/* ARFB table 9 for 11ac 5G 2SS */
rtw_write32(Adapter, REG_ARFR0_8812, 0x00000010);
rtw_write32(Adapter, REG_ARFR0_8812 + 4, 0xfffff000);
/* ARFB table 10 for 11ac 5G 1SS */
rtw_write32(Adapter, REG_ARFR1_8812, 0x00000010);
rtw_write32(Adapter, REG_ARFR1_8812 + 4, 0x003ff000);
/* ARFB table 11 for 11ac 24G 1SS */
rtw_write32(Adapter, REG_ARFR2_8812, 0x00000015);
rtw_write32(Adapter, REG_ARFR2_8812 + 4, 0x003ff000);
/* ARFB table 12 for 11ac 24G 2SS */
rtw_write32(Adapter, REG_ARFR3_8812, 0x00000015);
rtw_write32(Adapter, REG_ARFR3_8812 + 4, 0xffcff000);
}
static u32 _InitPowerOn_8812AU(_adapter *padapter)
{
u16 u2btmp = 0;
u8 u1btmp = 0;
u8 bMacPwrCtrlOn = _FALSE;
/* HW Power on sequence */
rtw_hal_get_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
if (bMacPwrCtrlOn == _TRUE)
return _SUCCESS;
if (IS_VENDOR_8821A_MP_CHIP(padapter)) {
/* HW Power on sequence */
if (!HalPwrSeqCmdParsing(padapter, PWR_CUT_A_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8821A_NIC_ENABLE_FLOW)) {
RTW_ERR("%s: run power on flow fail\n", __func__);
return _FAIL;
}
} else if (IS_HARDWARE_TYPE_8821U(padapter)) {
if (!HalPwrSeqCmdParsing(padapter, PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8821A_NIC_ENABLE_FLOW)) {
RTW_ERR("%s: run power on flow fail\n", __func__);
return _FAIL;
}
} else {
if (!HalPwrSeqCmdParsing(padapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8812_NIC_ENABLE_FLOW)) {
RTW_ERR("%s: run power on flow fail\n", __func__);
return _FAIL;
}
}
/* Enable MAC DMA/WMAC/SCHEDULE/SEC block */
/* Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */
rtw_write16(padapter, REG_CR, 0x00); /* suggseted by zhouzhou, by page, 20111230 */
u2btmp = rtw_read16(padapter, REG_CR);
u2btmp |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN
| PROTOCOL_EN | SCHEDULE_EN | ENSEC | CALTMR_EN);
rtw_write16(padapter, REG_CR, u2btmp);
/* Need remove below furture, suggest by Jackie. */
/* if 0xF0[24] =1 (LDO), need to set the 0x7C[6] to 1. */
if (IS_HARDWARE_TYPE_8821U(padapter)) {
u1btmp = rtw_read8(padapter, REG_SYS_CFG + 3);
if (u1btmp & BIT0) { /* LDO mode. */
u1btmp = rtw_read8(padapter, 0x7c);
rtw_write8(padapter, 0x7c, u1btmp | BIT6);
}
}
bMacPwrCtrlOn = _TRUE;
rtw_hal_set_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
return _SUCCESS;
}
/* ---------------------------------------------------------------
*
* MAC init functions
*
* --------------------------------------------------------------- */
/* Shall USB interface init this? */
static VOID
_InitInterrupt_8812AU(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 usb_opt;
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
struct dvobj_priv *pdev = adapter_to_dvobj(Adapter);
#endif
/* HIMR */
rtw_write32(Adapter, REG_HIMR0_8812, pHalData->IntrMask[0] & 0xFFFFFFFF);
rtw_write32(Adapter, REG_HIMR1_8812, pHalData->IntrMask[1] & 0xFFFFFFFF);
#ifdef CONFIG_SUPPORT_USB_INT
/* REG_USB_SPECIAL_OPTION - BIT(4)*/
/* 0; Use interrupt endpoint to upload interrupt pkt*/
/* 1; Use bulk endpoint to upload interrupt pkt,*/
usb_opt = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION);
if ((IS_FULL_SPEED_USB(Adapter))
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
|| (pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX] == 0x07)
#endif
)
usb_opt = usb_opt & (~INT_BULK_SEL);
else
usb_opt = usb_opt | (INT_BULK_SEL);
rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, usb_opt);
#endif/*CONFIG_SUPPORT_USB_INT*/
}
static VOID
_InitQueueReservedPage_8821AUsb(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u32 numHQ = 0;
u32 numLQ = 0;
u32 numNQ = 0;
u32 numEQ = 0;
u32 numPubQ = 0;
u32 value32;
u32 value32_npq;
u8 value8;
BOOLEAN bWiFiConfig = pregistrypriv->wifi_spec;
#ifdef CONFIG_MCC_MODE
u8 en_mcc = pregistrypriv->en_mcc;
#else /* !CONFIG_MCC_MODE */
u8 en_mcc = _FALSE;
#endif /* CONFIG_MCC_MODE */
if (bWiFiConfig) {
/* wifi test case */
if (pHalData->OutEpQueueSel & TX_SELE_HQ)
numHQ = WMM_NORMAL_PAGE_NUM_HPQ_8821;
if (pHalData->OutEpQueueSel & TX_SELE_LQ)
numLQ = WMM_NORMAL_PAGE_NUM_LPQ_8821;
if (pHalData->OutEpQueueSel & TX_SELE_NQ)
numNQ = WMM_NORMAL_PAGE_NUM_NPQ_8821;
if (pHalData->OutEpQueueSel & TX_SELE_EQ)
numEQ = NORMAL_PAGE_NUM_EPQ_8821;
} else if (en_mcc) {
/* mcc case */
if (pHalData->OutEpQueueSel & TX_SELE_HQ)
numHQ = MCC_NORMAL_PAGE_NUM_HPQ_8821;
if (pHalData->OutEpQueueSel & TX_SELE_LQ)
numLQ = MCC_NORMAL_PAGE_NUM_LPQ_8821;
if (pHalData->OutEpQueueSel & TX_SELE_NQ)
numNQ = MCC_NORMAL_PAGE_NUM_NPQ_8821;
if (pHalData->OutEpQueueSel & TX_SELE_EQ)
numEQ = NORMAL_PAGE_NUM_EPQ_8821;
} else {
/* narmal case */
if (pHalData->OutEpQueueSel & TX_SELE_HQ)
numHQ = NORMAL_PAGE_NUM_HPQ_8821;
if (pHalData->OutEpQueueSel & TX_SELE_LQ)
numLQ = NORMAL_PAGE_NUM_LPQ_8821;
if (pHalData->OutEpQueueSel & TX_SELE_NQ)
numNQ = NORMAL_PAGE_NUM_NPQ_8821;
if (pHalData->OutEpQueueSel & TX_SELE_EQ)
numEQ = NORMAL_PAGE_NUM_EPQ_8821;
}
numPubQ = TX_TOTAL_PAGE_NUMBER_8821 - numHQ - numLQ - numNQ - numEQ;
value32_npq = _NPQ(numNQ) | _EPQ(numEQ);
rtw_write32(Adapter, REG_RQPN_NPQ, value32_npq);
/* TX DMA RQPN */
value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN;
rtw_write32(Adapter, REG_RQPN, value32);
}
static VOID
_InitQueueReservedPage_8812AUsb(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u32 numHQ = 0;
u32 numLQ = 0;
u32 numNQ = 0;
u32 numPubQ = 0;
u32 value32;
u8 value8;
BOOLEAN bWiFiConfig = pregistrypriv->wifi_spec;
if (!bWiFiConfig) {
if (pHalData->OutEpQueueSel & TX_SELE_HQ)
numHQ = NORMAL_PAGE_NUM_HPQ_8812;
if (pHalData->OutEpQueueSel & TX_SELE_LQ)
numLQ = NORMAL_PAGE_NUM_LPQ_8812;
/* NOTE: This step shall be proceed before writting REG_RQPN. */
if (pHalData->OutEpQueueSel & TX_SELE_NQ)
numNQ = NORMAL_PAGE_NUM_NPQ_8812;
} else {
/* WMM */
if (pHalData->OutEpQueueSel & TX_SELE_HQ)
numHQ = WMM_NORMAL_PAGE_NUM_HPQ_8812;
if (pHalData->OutEpQueueSel & TX_SELE_LQ)
numLQ = WMM_NORMAL_PAGE_NUM_LPQ_8812;
/* NOTE: This step shall be proceed before writting REG_RQPN. */
if (pHalData->OutEpQueueSel & TX_SELE_NQ)
numNQ = WMM_NORMAL_PAGE_NUM_NPQ_8812;
}
numPubQ = TX_TOTAL_PAGE_NUMBER_8812 - numHQ - numLQ - numNQ;
value8 = (u8)_NPQ(numNQ);
rtw_write8(Adapter, REG_RQPN_NPQ, value8);
/* TX DMA */
value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN;
rtw_write32(Adapter, REG_RQPN, value32);
}
static VOID
_InitTxBufferBoundary_8821AUsb(
IN PADAPTER Adapter
)
{
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u8 txpktbuf_bndy;
if (!pregistrypriv->wifi_spec)
txpktbuf_bndy = TX_PAGE_BOUNDARY_8821;
else {
/* for WMM */
txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_8821;
}
rtw_write8(Adapter, REG_BCNQ_BDNY, txpktbuf_bndy);
rtw_write8(Adapter, REG_MGQ_BDNY, txpktbuf_bndy);
rtw_write8(Adapter, REG_WMAC_LBK_BF_HD, txpktbuf_bndy);
rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy);
rtw_write8(Adapter, REG_TDECTRL + 1, txpktbuf_bndy);
#ifdef CONFIG_CONCURRENT_MODE
rtw_write8(Adapter, REG_BCNQ1_BDNY, txpktbuf_bndy + 8);
rtw_write8(Adapter, REG_DWBCN1_CTRL_8812 + 1, txpktbuf_bndy + 8); /* BCN1_HEAD */
/* BIT1- BIT_SW_BCN_SEL_EN */
rtw_write8(Adapter, REG_DWBCN1_CTRL_8812 + 2, rtw_read8(Adapter, REG_DWBCN1_CTRL_8812 + 2) | BIT1);
#endif
}
static VOID
_InitTxBufferBoundary_8812AUsb(
IN PADAPTER Adapter
)
{
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u8 txpktbuf_bndy;
if (!pregistrypriv->wifi_spec)
txpktbuf_bndy = TX_PAGE_BOUNDARY_8812;
else {
/* for WMM */
txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_8812;
}
rtw_write8(Adapter, REG_BCNQ_BDNY, txpktbuf_bndy);
rtw_write8(Adapter, REG_MGQ_BDNY, txpktbuf_bndy);
rtw_write8(Adapter, REG_WMAC_LBK_BF_HD, txpktbuf_bndy);
rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy);
rtw_write8(Adapter, REG_TDECTRL + 1, txpktbuf_bndy);
}
static VOID
_InitPageBoundary_8812AUsb(
IN PADAPTER Adapter
)
{
/* u2Byte rxff_bndy; */
/* u2Byte Offset; */
/* BOOLEAN bSupportRemoteWakeUp; */
/* Adapter->HalFunc.get_hal_def_var_handler(Adapter, HAL_DEF_WOWLAN , &bSupportRemoteWakeUp); */
/* RX Page Boundary */
/* srand(static_cast<unsigned int>(time(NULL)) ); */
/* Offset = MAX_RX_DMA_BUFFER_SIZE_8812/256;
* rxff_bndy = (Offset*256)-1; */
if (IS_HARDWARE_TYPE_8812(Adapter))
rtw_write16(Adapter, (REG_TRXFF_BNDY + 2), RX_DMA_BOUNDARY_8812);
else
rtw_write16(Adapter, (REG_TRXFF_BNDY + 2), RX_DMA_BOUNDARY_8821);
}
static VOID
_InitNormalChipRegPriority_8812AUsb(
IN PADAPTER Adapter,
IN u16 beQ,
IN u16 bkQ,
IN u16 viQ,
IN u16 voQ,
IN u16 mgtQ,
IN u16 hiQ
)
{
u16 value16 = (rtw_read16(Adapter, REG_TRXDMA_CTRL) & 0x7);
value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) |
_TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) |
_TXDMA_MGQ_MAP(mgtQ) | _TXDMA_HIQ_MAP(hiQ);
rtw_write16(Adapter, REG_TRXDMA_CTRL, value16);
}
static VOID
_InitNormalChipTwoOutEpPriority_8812AUsb(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
u16 valueHi = 0;
u16 valueLow = 0;
switch (pHalData->OutEpQueueSel) {
case (TX_SELE_HQ | TX_SELE_LQ):
valueHi = QUEUE_HIGH;
valueLow = QUEUE_LOW;
break;
case (TX_SELE_NQ | TX_SELE_LQ):
valueHi = QUEUE_NORMAL;
valueLow = QUEUE_LOW;
break;
case (TX_SELE_HQ | TX_SELE_NQ):
valueHi = QUEUE_HIGH;
valueLow = QUEUE_NORMAL;
break;
default:
valueHi = QUEUE_HIGH;
valueLow = QUEUE_NORMAL;
break;
}
if (!pregistrypriv->wifi_spec) {
beQ = valueLow;
bkQ = valueLow;
viQ = valueHi;
voQ = valueHi;
mgtQ = valueHi;
hiQ = valueHi;
} else { /* for WMM ,CONFIG_OUT_EP_WIFI_MODE */
beQ = valueLow;
bkQ = valueHi;
viQ = valueHi;
voQ = valueLow;
mgtQ = valueHi;
hiQ = valueHi;
}
_InitNormalChipRegPriority_8812AUsb(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
}
static VOID
_InitNormalChipThreeOutEpPriority_8812AUsb(
IN PADAPTER Adapter
)
{
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
if (!pregistrypriv->wifi_spec) { /* typical setting */
beQ = QUEUE_LOW;
bkQ = QUEUE_LOW;
viQ = QUEUE_NORMAL;
voQ = QUEUE_HIGH;
mgtQ = QUEUE_HIGH;
hiQ = QUEUE_HIGH;
} else { /* for WMM */
beQ = QUEUE_LOW;
bkQ = QUEUE_NORMAL;
viQ = QUEUE_NORMAL;
voQ = QUEUE_HIGH;
mgtQ = QUEUE_HIGH;
hiQ = QUEUE_HIGH;
}
_InitNormalChipRegPriority_8812AUsb(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
}
static VOID
init_hi_queue_config_8812a_usb(
IN PADAPTER Adapter
)
{
/* Packet in Hi Queue Tx immediately (No constraint for ATIM Period)*/
rtw_write8(Adapter, REG_HIQ_NO_LMT_EN, 0xFF);
}
static VOID
_InitNormalChipFourOutEpPriority_8812AUsb(
IN PADAPTER Adapter
)
{
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
if (!pregistrypriv->wifi_spec) { /* typical setting */
beQ = QUEUE_LOW;
bkQ = QUEUE_LOW;
viQ = QUEUE_NORMAL;
voQ = QUEUE_NORMAL;
mgtQ = QUEUE_EXTRA;
hiQ = QUEUE_HIGH;
} else { /* for WMM */
beQ = QUEUE_LOW;
bkQ = QUEUE_NORMAL;
viQ = QUEUE_NORMAL;
voQ = QUEUE_HIGH;
mgtQ = QUEUE_HIGH;
hiQ = QUEUE_HIGH;
}
_InitNormalChipRegPriority_8812AUsb(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
init_hi_queue_config_8812a_usb(Adapter);
}
static VOID
_InitQueuePriority_8812AUsb(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
switch (pHalData->OutEpNumber) {
case 2:
_InitNormalChipTwoOutEpPriority_8812AUsb(Adapter);
break;
case 3:
_InitNormalChipThreeOutEpPriority_8812AUsb(Adapter);
break;
case 4:
_InitNormalChipFourOutEpPriority_8812AUsb(Adapter);
break;
default:
RTW_INFO("_InitQueuePriority_8812AUsb(): Shall not reach here!\n");
break;
}
}
static VOID
_InitHardwareDropIncorrectBulkOut_8812A(
IN PADAPTER Adapter
)
{
#ifdef ENABLE_USB_DROP_INCORRECT_OUT
u32 value32 = rtw_read32(Adapter, REG_TXDMA_OFFSET_CHK);
value32 |= DROP_DATA_EN;
rtw_write32(Adapter, REG_TXDMA_OFFSET_CHK, value32);
#endif
}
static VOID
_InitNetworkType_8812A(
IN PADAPTER Adapter
)
{
u32 value32;
value32 = rtw_read32(Adapter, REG_CR);
/* TODO: use the other function to set network type */
value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AP);
rtw_write32(Adapter, REG_CR, value32);
}
static VOID
_InitTransferPageSize_8812AUsb(
IN PADAPTER Adapter
)
{
u8 value8;
value8 = _PSTX(PBP_512);
PlatformEFIOWrite1Byte(Adapter, REG_PBP, value8);
}
static VOID
_InitDriverInfoSize_8812A(
IN PADAPTER Adapter,
IN u8 drvInfoSize
)
{
rtw_write8(Adapter, REG_RX_DRVINFO_SZ, drvInfoSize);
}
static VOID
_InitWMACSetting_8812A(
IN PADAPTER Adapter
)
{
/* u4Byte value32; */
u16 value16;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u32 rcr;
/* rcr = AAP | APM | AM | AB | APP_ICV | ADF | AMF | APP_FCS | HTC_LOC_CTRL | APP_MIC | APP_PHYSTS; */
rcr =
RCR_APM | RCR_AM | RCR_AB | RCR_CBSSID_DATA | RCR_CBSSID_BCN | RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYST_RXFF;
#if (1 == RTL8812A_RX_PACKET_INCLUDE_CRC)
rcr |= ACRC32;
#endif
#ifdef CONFIG_RX_PACKET_APPEND_FCS
rcr |= RCR_APPFCS;
#endif
rcr |= FORCEACK;
rtw_hal_set_hwreg(Adapter, HW_VAR_RCR, (u8 *)&rcr);
/* Accept all multicast address */
rtw_write32(Adapter, REG_MAR, 0xFFFFFFFF);
rtw_write32(Adapter, REG_MAR + 4, 0xFFFFFFFF);
/* Accept all data frames */
/* value16 = 0xFFFF; */
/* rtw_write16(Adapter, REG_RXFLTMAP2, value16); */
/* 2010.09.08 hpfan */
/* Since ADF is removed from RCR, ps-poll will not be indicate to driver, */
/* RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll. */
value16 = BIT10;
#ifdef CONFIG_BEAMFORMING
/* NDPA packet subtype is 0x0101 */
value16 |= BIT5;
#endif/*CONFIG_BEAMFORMING*/
rtw_write16(Adapter, REG_RXFLTMAP1, value16);
/* Accept all management frames */
/* value16 = 0xFFFF; */
/* rtw_write16(Adapter, REG_RXFLTMAP0, value16); */
/* enable RX_SHIFT bits */
/* rtw_write8(Adapter, REG_TRXDMA_CTRL, rtw_read8(Adapter, REG_TRXDMA_CTRL)|BIT(1)); */
}
static VOID
_InitAdaptiveCtrl_8812AUsb(
IN PADAPTER Adapter
)
{
u16 value16;
u32 value32;
/* Response Rate Set */
value32 = rtw_read32(Adapter, REG_RRSR);
value32 &= ~RATE_BITMAP_ALL;
if (Adapter->registrypriv.wireless_mode & WIRELESS_11B)
value32 |= RATE_RRSR_CCK_ONLY_1M;
else
value32 |= RATE_RRSR_WITHOUT_CCK;
value32 |= RATE_RRSR_CCK_ONLY_1M;
rtw_write32(Adapter, REG_RRSR, value32);
/* CF-END Threshold */
/* m_spIoBase->rtw_write8(REG_CFEND_TH, 0x1); */
/* SIFS (used in NAV) */
value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10);
rtw_write16(Adapter, REG_SPEC_SIFS, value16);
/* Retry Limit */
value16 = BIT_LRL(RL_VAL_STA) | BIT_SRL(RL_VAL_STA);
rtw_write16(Adapter, REG_RETRY_LIMIT, value16);
}
static VOID
_InitEDCA_8812AUsb(
IN PADAPTER Adapter
)
{
/* Set Spec SIFS (used in NAV) */
rtw_write16(Adapter, REG_SPEC_SIFS, 0x100a);
rtw_write16(Adapter, REG_MAC_SPEC_SIFS, 0x100a);
/* Set SIFS for CCK */
rtw_write16(Adapter, REG_SIFS_CTX, 0x100a);
/* Set SIFS for OFDM */
rtw_write16(Adapter, REG_SIFS_TRX, 0x100a);
/* TXOP */
rtw_write32(Adapter, REG_EDCA_BE_PARAM, 0x005EA42B);
rtw_write32(Adapter, REG_EDCA_BK_PARAM, 0x0000A44F);
rtw_write32(Adapter, REG_EDCA_VI_PARAM, 0x005EA324);
rtw_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226);
/* 0x50 for 80MHz clock */
rtw_write8(Adapter, REG_USTIME_TSF, 0x50);
rtw_write8(Adapter, REG_USTIME_EDCA, 0x50);
}
static VOID
_InitBeaconMaxError_8812A(
IN PADAPTER Adapter,
IN BOOLEAN InfraMode
)
{
#ifdef CONFIG_ADHOC_WORKAROUND_SETTING
rtw_write8(Adapter, REG_BCN_MAX_ERR, 0xFF);
#else
/* rtw_write8(Adapter, REG_BCN_MAX_ERR, (InfraMode ? 0xFF : 0x10)); */
#endif
}
#ifdef CONFIG_RTW_LED
static void _InitHWLed(PADAPTER Adapter)
{
struct led_priv *pledpriv = adapter_to_led(Adapter);
if (pledpriv->LedStrategy != HW_LED)
return;
/* HW led control
* to do ....
* must consider cases of antenna diversity/ commbo card/solo card/mini card */
}
#endif /* CONFIG_RTW_LED */
static VOID
_InitRDGSetting_8812A(
IN PADAPTER Adapter
)
{
rtw_write8(Adapter, REG_RD_CTRL, 0xFF);
rtw_write16(Adapter, REG_RD_NAV_NXT, 0x200);
rtw_write8(Adapter, REG_RD_RESP_PKT_TH, 0x05);
}
static VOID
_InitRetryFunction_8812A(
IN PADAPTER Adapter
)
{
u8 value8;
value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL);
value8 |= EN_AMPDU_RTY_NEW;
rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);
/* Set ACK timeout */
/* rtw_write8(Adapter, REG_ACKTO, 0x40); */ /* masked by page for BCM IOT issue temporally */
rtw_write8(Adapter, REG_ACKTO, 0x80);
}
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingTxUpdate()
*
* Overview: Seperate TX/RX parameters update independent for TP detection and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: PADAPTER
*
* Output/Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Seperate to smaller function.
*
*---------------------------------------------------------------------------*/
static VOID
usb_AggSettingTxUpdate_8812A(
IN PADAPTER Adapter
)
{
#ifdef CONFIG_USB_TX_AGGREGATION
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u32 value32;
if (Adapter->registrypriv.wifi_spec)
pHalData->UsbTxAggMode = _FALSE;
if (pHalData->UsbTxAggMode) {
value32 = rtw_read32(Adapter, REG_TDECTRL);
value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT);
value32 |= ((pHalData->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT);
rtw_write32(Adapter, REG_DWBCN0_CTRL_8812, value32);
if (IS_HARDWARE_TYPE_8821U(Adapter)) /* page added for Jaguar */
rtw_write8(Adapter, REG_DWBCN1_CTRL_8812, pHalData->UsbTxAggDescNum << 1);
}
#endif
} /* usb_AggSettingTxUpdate */
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingRxUpdate()
*
* Overview: Seperate TX/RX parameters update independent for TP detection and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: PADAPTER
*
* Output/Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Seperate to smaller function.
*
*---------------------------------------------------------------------------*/
static VOID
usb_AggSettingRxUpdate_8812A(
IN PADAPTER Adapter
)
{
#ifdef CONFIG_USB_RX_AGGREGATION
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 valueDMA;
u8 valueUSB;
valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL);
switch (pHalData->rxagg_mode) {
case RX_AGG_DMA:
valueDMA |= RXDMA_AGG_EN;
/* 2012/10/26 MH For TX through start rate temp fix. */
{
u16 temp;
/* Adjust DMA page and thresh. */
temp = pHalData->rxagg_dma_size | (pHalData->rxagg_dma_timeout << 8);
rtw_write16(Adapter, REG_RXDMA_AGG_PG_TH, temp);
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH + 3, BIT(7)); /* for dma agg , 0x280[31]GBIT_RXDMA_AGG_OLD_MOD, set 1 */
}
break;
case RX_AGG_USB:
valueDMA |= RXDMA_AGG_EN;
{
u16 temp;
/* Adjust DMA page and thresh. */
temp = pHalData->rxagg_usb_size | (pHalData->rxagg_usb_timeout << 8);
rtw_write16(Adapter, REG_RXDMA_AGG_PG_TH, temp);
}
break;
case RX_AGG_MIX:
case RX_AGG_DISABLE:
default:
/* TODO: */
break;
}
rtw_write8(Adapter, REG_TRXDMA_CTRL, valueDMA);
#endif
} /* usb_AggSettingRxUpdate */
static VOID
init_UsbAggregationSetting_8812A(
IN PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
/* Tx aggregation setting */
usb_AggSettingTxUpdate_8812A(Adapter);
/* Rx aggregation setting */
usb_AggSettingRxUpdate_8812A(Adapter);
/* 201/12/10 MH Add for USB agg mode dynamic switch. */
pHalData->UsbRxHighSpeedMode = _FALSE;
}
/*-----------------------------------------------------------------------------
* Function: USB_AggModeSwitch()
*
* Overview: When RX traffic is more than 40M, we need to adjust some parameters to increase
* RX speed by increasing batch indication size. This will decrease TCP ACK speed, we
* need to monitor the influence of FTP/network share.
* For TX mode, we are still ubder investigation.
*
* Input: PADAPTER
*
* Output: NONE
*
* Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Create Version 0.
*
*---------------------------------------------------------------------------*/
VOID
USB_AggModeSwitch(
IN PADAPTER Adapter
)
{
#if 0
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
/* pHalData->UsbRxHighSpeedMode = FALSE; */
/* How to measure the RX speed? We assume that when traffic is more than */
if (pMgntInfo->bRegAggDMEnable == FALSE) {
return; /* Inf not support. */
}
if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == TRUE &&
pHalData->UsbRxHighSpeedMode == FALSE) {
pHalData->UsbRxHighSpeedMode = TRUE;
} else if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == FALSE &&
pHalData->UsbRxHighSpeedMode == TRUE) {
pHalData->UsbRxHighSpeedMode = FALSE;
} else
return;
#if USB_RX_AGGREGATION_92C
if (pHalData->UsbRxHighSpeedMode == TRUE) {
/* 2010/12/10 MH The parameter is tested by SD1 engineer and SD3 channel emulator. */
/* USB mode */
#if (RT_PLATFORM == PLATFORM_LINUX)
if (pMgntInfo->LinkDetectInfo.bTxBusyTraffic) {
pHalData->RxAggBlockCount = 16;
pHalData->RxAggBlockTimeout = 7;
} else
#endif
{
pHalData->RxAggBlockCount = 40;
pHalData->RxAggBlockTimeout = 5;
}
/* Mix mode */
pHalData->RxAggPageCount = 72;
pHalData->RxAggPageTimeout = 6;
} else {
/* USB mode */
pHalData->RxAggBlockCount = pMgntInfo->RegRxAggBlockCount;
pHalData->RxAggBlockTimeout = pMgntInfo->RegRxAggBlockTimeout;
/* Mix mode */
pHalData->RxAggPageCount = pMgntInfo->RegRxAggPageCount;
pHalData->RxAggPageTimeout = pMgntInfo->RegRxAggPageTimeout;
}
if (pHalData->RxAggBlockCount > MAX_RX_AGG_BLKCNT)
pHalData->RxAggBlockCount = MAX_RX_AGG_BLKCNT;
#if (OS_WIN_FROM_VISTA(OS_VERSION)) || (RT_PLATFORM == PLATFORM_LINUX) /* do not support WINXP to prevent usbehci.sys BSOD */
if (IS_WIRELESS_MODE_N_24G(Adapter) || IS_WIRELESS_MODE_N_5G(Adapter)) {
/* */
/* 2010/12/24 MH According to V1012 QC IOT test, XP BSOD happen when running chariot test */
/* with the aggregation dynamic change!! We need to disable the function to prevent it is broken */
/* in usbehci.sys. */
/* */
usb_AggSettingRxUpdate_8188E(Adapter);
/* 2010/12/27 MH According to designer's suggstion, we can only modify Timeout value. Otheriwse */
/* there might many HW incorrect behavior, the XP BSOD at usbehci.sys may be relative to the */
/* issue. Base on the newest test, we can not enable block cnt > 30, otherwise XP usbehci.sys may */
/* BSOD. */
}
#endif
#endif
#endif
} /* USB_AggModeSwitch */
/* Set CCK and OFDM Block "ON" */
static VOID _BBTurnOnBlock(
IN PADAPTER Adapter
)
{
#if (DISABLE_BB_RF)
return;
#endif
phy_set_bb_reg(Adapter, rFPGA0_RFMOD, bCCKEn, 0x1);
phy_set_bb_reg(Adapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
}
static VOID _RfPowerSave(
IN PADAPTER Adapter
)
{
#if 0
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
enum rf_path eRFPath;
#if (DISABLE_BB_RF)
return;
#endif
if (pMgntInfo->RegRfOff == TRUE) { /* User disable RF via registry. */
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
/* Those action will be discard in MgntActSet_RF_State because off the same state */
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
phy_set_rf_reg(Adapter, eRFPath, 0x4, 0xC00, 0x0);
} else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) { /* H/W or S/W RF OFF before sleep. */
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
} else {
pHalData->eRFPowerState = eRfOn;
pMgntInfo->RfOffReason = 0;
if (Adapter->bInSetPower || Adapter->bResetInProgress)
PlatformUsbEnableInPipes(Adapter);
}
#endif
}
enum {
Antenna_Lfet = 1,
Antenna_Right = 2,
};
/*
* 2010/08/26 MH Add for selective suspend mode check.
* If Efuse 0x0e bit1 is not enabled, we can not support selective suspend for Minicard and
* slim card.
* */
static VOID
HalDetectSelectiveSuspendMode(
IN PADAPTER Adapter
)
{
#if 0
u8 tmpvalue;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(Adapter);
/* If support HW radio detect, we need to enable WOL ability, otherwise, we */
/* can not use FW to notify host the power state switch. */
EFUSE_ShadowRead(Adapter, 1, EEPROM_USB_OPTIONAL1, (u32 *)&tmpvalue);
RTW_INFO("HalDetectSelectiveSuspendMode(): SS ");
if (tmpvalue & BIT1)
RTW_INFO("Enable\n");
else {
RTW_INFO("Disable\n");
pdvobjpriv->RegUsbSS = _FALSE;
}
/* 2010/09/01 MH According to Dongle Selective Suspend INF. We can switch SS mode. */
if (pdvobjpriv->RegUsbSS && !SUPPORT_HW_RADIO_DETECT(pHalData)) {
/* PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); */
/* if (!pMgntInfo->bRegDongleSS) */
/* { */
pdvobjpriv->RegUsbSS = _FALSE;
/* } */
}
#endif
} /* HalDetectSelectiveSuspendMode */
rt_rf_power_state RfOnOffDetect(IN PADAPTER pAdapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(pAdapter);
u8 val8;
rt_rf_power_state rfpowerstate = rf_off;
if (pwrctl->bHWPowerdown) {
val8 = rtw_read8(pAdapter, REG_HSISR);
RTW_INFO("pwrdown, 0x5c(BIT7)=%02x\n", val8);
rfpowerstate = (val8 & BIT7) ? rf_off : rf_on;
} else { /* rf on/off */
rtw_write8(pAdapter, REG_MAC_PINMUX_CFG, rtw_read8(pAdapter, REG_MAC_PINMUX_CFG) & ~(BIT3));
val8 = rtw_read8(pAdapter, REG_GPIO_IO_SEL);
RTW_INFO("GPIO_IN=%02x\n", val8);
rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;
}
return rfpowerstate;
} /* HalDetectPwrDownMode */
void _ps_open_RF(_adapter *padapter)
{
/* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */
/* phy_SsPwrSwitch92CU(padapter, rf_on, 1); */
}
void _ps_close_RF(_adapter *padapter)
{
/* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */
/* phy_SsPwrSwitch92CU(padapter, rf_off, 1); */
}
/* A lightweight deinit function */
static void rtl8812au_hw_reset(_adapter *Adapter)
{
u8 reg_val = 0;
if (rtw_read8(Adapter, REG_MCUFWDL) & BIT7) {
_8051Reset8812(Adapter);
rtw_write8(Adapter, REG_MCUFWDL, 0x00);
/* before BB reset should do clock gated */
rtw_write32(Adapter, rFPGA0_XCD_RFPara,
rtw_read32(Adapter, rFPGA0_XCD_RFPara) | (BIT6));
/* reset BB */
reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN);
reg_val &= ~(BIT(0) | BIT(1));
rtw_write8(Adapter, REG_SYS_FUNC_EN, reg_val);
/* reset RF */
rtw_write8(Adapter, REG_RF_CTRL, 0);
/* reset TRX path */
rtw_write16(Adapter, REG_CR, 0);
/* reset MAC */
reg_val = rtw_read8(Adapter, REG_APS_FSMCO + 1);
reg_val |= BIT(1);
reg_val = rtw_write8(Adapter, REG_APS_FSMCO + 1, reg_val); /* reg0x5[1] ,auto FSM off */
reg_val = rtw_read8(Adapter, REG_APS_FSMCO + 1);
/* check if reg0x5[1] auto cleared */
while (reg_val & BIT(1)) {
rtw_udelay_os(1);
reg_val = rtw_read8(Adapter, REG_APS_FSMCO + 1);
}
reg_val |= BIT(0);
reg_val = rtw_write8(Adapter, REG_APS_FSMCO + 1, reg_val); /* reg0x5[0] ,auto FSM on */
reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN + 1);
reg_val &= ~(BIT(4) | BIT(7));
rtw_write8(Adapter, REG_SYS_FUNC_EN + 1, reg_val);
reg_val = rtw_read8(Adapter, REG_SYS_FUNC_EN + 1);
reg_val |= BIT(4) | BIT(7);
rtw_write8(Adapter, REG_SYS_FUNC_EN + 1, reg_val);
}
}
u32 rtl8812au_hal_init(PADAPTER Adapter)
{
u8 value8 = 0, u1bRegCR;
u16 value16;
u8 txpktbuf_bndy;
u32 status = _SUCCESS;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(Adapter);
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
rt_rf_power_state eRfPowerStateToSet;
systime init_start_time = rtw_get_current_time();
#ifdef DBG_HAL_INIT_PROFILING
enum HAL_INIT_STAGES {
HAL_INIT_STAGES_BEGIN = 0,
HAL_INIT_STAGES_INIT_PW_ON,
HAL_INIT_STAGES_INIT_LLTT,
HAL_INIT_STAGES_DOWNLOAD_FW,
HAL_INIT_STAGES_MAC,
HAL_INIT_STAGES_MISC01,
HAL_INIT_STAGES_MISC02,
HAL_INIT_STAGES_BB,
HAL_INIT_STAGES_RF,
HAL_INIT_STAGES_TURN_ON_BLOCK,
HAL_INIT_STAGES_INIT_SECURITY,
HAL_INIT_STAGES_MISC11,
HAL_INIT_STAGES_INIT_HAL_DM,
/* HAL_INIT_STAGES_RF_PS, */
HAL_INIT_STAGES_IQK,
HAL_INIT_STAGES_PW_TRACK,
HAL_INIT_STAGES_LCK,
HAL_INIT_STAGES_MISC21,
/* HAL_INIT_STAGES_INIT_PABIAS, */
#ifdef CONFIG_BT_COEXIST
HAL_INIT_STAGES_BT_COEXIST,
#endif
/* HAL_INIT_STAGES_ANTENNA_SEL, */
HAL_INIT_STAGES_MISC31,
HAL_INIT_STAGES_END,
HAL_INIT_STAGES_NUM
};
char *hal_init_stages_str[] = {
"HAL_INIT_STAGES_BEGIN",
"HAL_INIT_STAGES_INIT_PW_ON",
"HAL_INIT_STAGES_INIT_LLTT",
"HAL_INIT_STAGES_DOWNLOAD_FW",
"HAL_INIT_STAGES_MAC",
"HAL_INIT_STAGES_MISC01",
"HAL_INIT_STAGES_MISC02",
"HAL_INIT_STAGES_BB",
"HAL_INIT_STAGES_RF",
"HAL_INIT_STAGES_TURN_ON_BLOCK",
"HAL_INIT_STAGES_INIT_SECURITY",
"HAL_INIT_STAGES_MISC11",
"HAL_INIT_STAGES_INIT_HAL_DM",
/* "HAL_INIT_STAGES_RF_PS", */
"HAL_INIT_STAGES_IQK",
"HAL_INIT_STAGES_PW_TRACK",
"HAL_INIT_STAGES_LCK",
"HAL_INIT_STAGES_MISC21",
#ifdef CONFIG_BT_COEXIST
"HAL_INIT_STAGES_BT_COEXIST",
#endif
/* "HAL_INIT_STAGES_ANTENNA_SEL", */
"HAL_INIT_STAGES_MISC31",
"HAL_INIT_STAGES_END",
};
int hal_init_profiling_i;
systime hal_init_stages_timestamp[HAL_INIT_STAGES_NUM]; /* used to record the time of each stage's starting point */
for (hal_init_profiling_i = 0; hal_init_profiling_i < HAL_INIT_STAGES_NUM; hal_init_profiling_i++)
hal_init_stages_timestamp[hal_init_profiling_i] = 0;
#define HAL_INIT_PROFILE_TAG(stage) do { hal_init_stages_timestamp[(stage)] = rtw_get_current_time(); } while (0)
#else
#define HAL_INIT_PROFILE_TAG(stage) do {} while (0)
#endif /* DBG_HAL_INIT_PROFILING */
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN);
if (pwrctrlpriv->bkeepfwalive) {
_ps_open_RF(Adapter);
if (pHalData->bIQKInitialized) {
/* PHY_IQCalibrate_8812A(Adapter,_TRUE); */
} else {
/* PHY_IQCalibrate_8812A(Adapter,_FALSE); */
/* pHalData->bIQKInitialized = _TRUE; */
}
/* odm_txpowertracking_check(&pHalData->odmpriv ); */
/* PHY_LCCalibrate_8812A(Adapter); */
goto exit;
}
/* Check if MAC has already power on. by tynli. 2011.05.27. */
value8 = rtw_read8(Adapter, REG_SYS_CLKR + 1);
u1bRegCR = PlatformEFIORead1Byte(Adapter, REG_CR);
RTW_INFO(" power-on :REG_SYS_CLKR 0x09=0x%02x. REG_CR 0x100=0x%02x.\n", value8, u1bRegCR);
if ((value8 & BIT3) && (u1bRegCR != 0 && u1bRegCR != 0xEA)) {
/* pHalData->bMACFuncEnable = TRUE; */
RTW_INFO(" MAC has already power on.\n");
} else {
/* pHalData->bMACFuncEnable = FALSE; */
/* Set FwPSState to ALL_ON mode to prevent from the I/O be return because of 32k */
/* state which is set before sleep under wowlan mode. 2012.01.04. by tynli. */
/* pHalData->FwPSState = FW_PS_STATE_ALL_ON_88E; */
RTW_INFO(" MAC has not been powered on yet.\n");
}
/* */
/* 2012/11/13 MH Revise for U2/U3 switch we can not update RF-A/B reset. */
/* After discuss with BB team YN, reset after MAC power on to prevent RF */
/* R/W error. Is it a right method? */
/* */
if (!IS_HARDWARE_TYPE_8821(Adapter)) {
rtw_write8(Adapter, REG_RF_CTRL, 5);
rtw_write8(Adapter, REG_RF_CTRL, 7);
rtw_write8(Adapter, REG_RF_B_CTRL_8812, 5);
rtw_write8(Adapter, REG_RF_B_CTRL_8812, 7);
}
/*
If HW didn't go through a complete de-initial procedure,
it probably occurs some problem for double initial procedure.
Like "CONFIG_DEINIT_BEFORE_INIT" in 92du chip
*/
rtl8812au_hw_reset(Adapter);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
status = rtw_hal_power_on(Adapter);
if (status == _FAIL) {
goto exit;
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT);
if (!pregistrypriv->wifi_spec) {
if (IS_HARDWARE_TYPE_8812(Adapter))
txpktbuf_bndy = TX_PAGE_BOUNDARY_8812;
else
txpktbuf_bndy = TX_PAGE_BOUNDARY_8821;
} else {
/* for WMM */
if (IS_HARDWARE_TYPE_8812(Adapter))
txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_8812;
else
txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_8821;
}
status = InitLLTTable8812A(Adapter, txpktbuf_bndy);
if (status == _FAIL) {
goto exit;
}
_InitHardwareDropIncorrectBulkOut_8812A(Adapter);
if (pHalData->bRDGEnable)
_InitRDGSetting_8812A(Adapter);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW);
if (Adapter->registrypriv.mp_mode == 0) {
status = FirmwareDownload8812(Adapter, _FALSE);
if (status != _SUCCESS) {
RTW_INFO("%s: Download Firmware failed!!\n", __FUNCTION__);
pHalData->bFWReady = _FALSE;
pHalData->fw_ractrl = _FALSE;
/* return status; */
} else {
RTW_INFO("%s: Download Firmware Success!!\n", __FUNCTION__);
pHalData->bFWReady = _TRUE;
pHalData->fw_ractrl = _TRUE;
}
}
if (pwrctrlpriv->reg_rfoff == _TRUE)
pwrctrlpriv->rf_pwrstate = rf_off;
/* 2010/08/09 MH We need to check if we need to turnon or off RF after detecting */
/* HW GPIO pin. Before PHY_RFConfig8192C. */
/* HalDetectPwrDownMode(Adapter); */
/* 2010/08/26 MH If Efuse does not support sective suspend then disable the function. */
/* HalDetectSelectiveSuspendMode(Adapter); */
/* Save target channel */
/* <Roger_Notes> Current Channel will be updated again later. */
pHalData->current_channel = 0;/* set 0 to trigger switch correct channel */
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC);
#if (HAL_MAC_ENABLE == 1)
status = PHY_MACConfig8812(Adapter);
if (status == _FAIL)
goto exit;
#endif
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01);
if (IS_HARDWARE_TYPE_8812(Adapter)) {
_InitQueueReservedPage_8812AUsb(Adapter);
_InitTxBufferBoundary_8812AUsb(Adapter);
} else if (IS_HARDWARE_TYPE_8821(Adapter)) {
_InitQueueReservedPage_8821AUsb(Adapter);
_InitTxBufferBoundary_8821AUsb(Adapter);
}
_InitQueuePriority_8812AUsb(Adapter);
_InitPageBoundary_8812AUsb(Adapter);
if (IS_HARDWARE_TYPE_8812(Adapter))
_InitTransferPageSize_8812AUsb(Adapter);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02);
/* Get Rx PHY status in order to report RSSI and others. */
_InitDriverInfoSize_8812A(Adapter, DRVINFO_SZ);
_InitInterrupt_8812AU(Adapter);
_InitNetworkType_8812A(Adapter);/* set msr */
_InitWMACSetting_8812A(Adapter);
_InitAdaptiveCtrl_8812AUsb(Adapter);
_InitEDCA_8812AUsb(Adapter);
_InitRetryFunction_8812A(Adapter);
init_UsbAggregationSetting_8812A(Adapter);
_InitBeaconParameters_8812A(Adapter);
_InitBeaconMaxError_8812A(Adapter, _TRUE);
_InitBurstPktLen(Adapter); /* added by page. 20110919 */
/* */
/* Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */
/* Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. */
/* 2011.08.05. by tynli. */
/* */
value8 = rtw_read8(Adapter, REG_CR);
rtw_write8(Adapter, REG_CR, (value8 | MACTXEN | MACRXEN));
#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_TX_MCAST2UNI)
#ifdef CONFIG_CHECK_AC_LIFETIME
/* Enable lifetime check for the four ACs */
rtw_write8(Adapter, REG_LIFETIME_CTRL, rtw_read8(Adapter, REG_LIFETIME_CTRL) | 0x0f);
#endif /* CONFIG_CHECK_AC_LIFETIME */
#ifdef CONFIG_TX_MCAST2UNI
rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
#else /* CONFIG_TX_MCAST2UNI */
rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x3000); /* unit: 256us. 3s */
rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x3000); /* unit: 256us. 3s */
#endif /* CONFIG_TX_MCAST2UNI */
#endif /* CONFIG_CONCURRENT_MODE || CONFIG_TX_MCAST2UNI */
#ifdef CONFIG_RTW_LED
_InitHWLed(Adapter);
#endif /* CONFIG_RTW_LED */
/* */
/* d. Initialize BB related configurations. */
/* */
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB);
#if (HAL_BB_ENABLE == 1)
status = PHY_BBConfig8812(Adapter);
if (status == _FAIL)
goto exit;
#endif
/* 92CU use 3-wire to r/w RF */
/* pHalData->Rf_Mode = RF_OP_By_SW_3wire; */
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF);
#if (HAL_RF_ENABLE == 1)
status = PHY_RFConfig8812(Adapter);
if (status == _FAIL)
goto exit;
if (pHalData->rf_type == RF_1T1R && IS_HARDWARE_TYPE_8812AU(Adapter))
PHY_BB8812_Config_1T(Adapter);
if (Adapter->registrypriv.rf_config == RF_1T2R && IS_HARDWARE_TYPE_8812AU(Adapter))
phy_set_bb_reg(Adapter, rTxPath_Jaguar, bMaskLWord, 0x1111);
#endif
if (Adapter->registrypriv.channel <= 14)
PHY_SwitchWirelessBand8812(Adapter, BAND_ON_2_4G);
else
PHY_SwitchWirelessBand8812(Adapter, BAND_ON_5G);
rtw_hal_set_chnl_bw(Adapter, Adapter->registrypriv.channel,
CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY);
invalidate_cam_all(Adapter);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11);
/* HW SEQ CTRL */
/* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */
rtw_write8(Adapter, REG_HWSEQ_CTRL, 0xFF);
/* */
/* Disable BAR, suggested by Scott */
/* 2010.04.09 add by hpfan */
/* */
rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff);
if (pregistrypriv->wifi_spec)
rtw_write16(Adapter, REG_FAST_EDCA_CTRL , 0);
/* adjust EDCCA to avoid collision */
if (pregistrypriv->wifi_spec) {
if (IS_HARDWARE_TYPE_8821(Adapter))
if (Adapter->registrypriv.adaptivity_en == 0) {
Adapter->registrypriv.adaptivity_en = 1;
Adapter->registrypriv.adaptivity_mode = 0;
}
}
/* Nav limit , suggest by scott */
rtw_write8(Adapter, 0x652, 0x0);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM);
rtl8812_InitHalDm(Adapter);
#if (MP_DRIVER == 1)
if (Adapter->registrypriv.mp_mode == 1) {
Adapter->mppriv.channel = pHalData->current_channel;
MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel);
} else
#endif /* #if (MP_DRIVER == 1) */
{
/* */
/* 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status */
/* and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not */
/* call init_adapter. May cause some problem?? */
/* */
/* Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed */
/* in MgntActSet_RF_State() after wake up, because the value of pHalData->eRFPowerState */
/* is the same as eRfOff, we should change it to eRfOn after we config RF parameters. */
/* Added by tynli. 2010.03.30. */
pwrctrlpriv->rf_pwrstate = rf_on;
/* 0x4c6[3] 1: RTS BW = Data BW */
/* 0: RTS BW depends on CCA / secondary CCA result. */
rtw_write8(Adapter, REG_QUEUE_CTRL, rtw_read8(Adapter, REG_QUEUE_CTRL) & 0xF7);
/* enable Tx report. */
rtw_write8(Adapter, REG_FWHW_TXQ_CTRL + 1, 0x0F);
/* Suggested by SD1 pisa. Added by tynli. 2011.10.21. */
rtw_write8(Adapter, REG_EARLY_MODE_CONTROL_8812 + 3, 0x01); /* Pretx_en, for WEP/TKIP SEC */
/* tynli_test_tx_report. */
rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0);
/* Reset USB mode switch setting */
rtw_write8(Adapter, REG_SDIO_CTRL_8812, 0x0);
rtw_write8(Adapter, REG_ACLK_MON, 0x0);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK);
/* 2010/08/26 MH Merge from 8192CE. */
if (pwrctrlpriv->rf_pwrstate == rf_on) {
/* if(IS_HARDWARE_TYPE_8812AU(Adapter))
{
#if (RTL8812A_SUPPORT == 1)
pHalData->bNeedIQK = _TRUE;
if(pHalData->bIQKInitialized)
PHY_IQCalibrate_8812A(Adapter, _TRUE);
else
{
PHY_IQCalibrate_8812A(Adapter, _FALSE);
pHalData->bIQKInitialized = _TRUE;
}
#endif
}*/
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK);
/* odm_txpowertracking_check(&pHalData->odmpriv ); */
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);
/* PHY_LCCalibrate_8812A(Adapter); */
}
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC21);
/* HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS);
* _InitPABias(Adapter); */
#ifdef CONFIG_BT_COEXIST
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BT_COEXIST);
/* _InitBTCoexist(Adapter); */
/* 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW enter */
/* suspend mode automatically. */
/* HwSuspendModeEnable92Cu(Adapter, _FALSE); */
if (_TRUE == pHalData->EEPROMBluetoothCoexist) {
/* Init BT hw config. */
rtw_btcoex_HAL_Initialize(Adapter, _FALSE);
} else {
/* In combo card run wifi only , must setting some hardware reg. */
rtl8812a_combo_card_WifiOnlyHwInit(Adapter);
}
#endif /* CONFIG_BT_COEXIST */
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC31);
rtw_write8(Adapter, REG_USB_HRPWM, 0);
#ifdef CONFIG_XMIT_ACK
/* ack for xmit mgmt frames. */
rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL) | BIT(12));
#endif /* CONFIG_XMIT_ACK */
exit:
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END);
RTW_INFO("%s in %dms\n", __FUNCTION__, rtw_get_passing_time_ms(init_start_time));
#ifdef DBG_HAL_INIT_PROFILING
hal_init_stages_timestamp[HAL_INIT_STAGES_END] = rtw_get_current_time();
for (hal_init_profiling_i = 0; hal_init_profiling_i < HAL_INIT_STAGES_NUM - 1; hal_init_profiling_i++) {
RTW_INFO("DBG_HAL_INIT_PROFILING: %35s, %u, %5u, %5u\n"
, hal_init_stages_str[hal_init_profiling_i]
, hal_init_stages_timestamp[hal_init_profiling_i]
, (hal_init_stages_timestamp[hal_init_profiling_i + 1] - hal_init_stages_timestamp[hal_init_profiling_i])
, rtw_get_time_interval_ms(hal_init_stages_timestamp[hal_init_profiling_i], hal_init_stages_timestamp[hal_init_profiling_i + 1])
);
}
#endif
return status;
}
VOID
hal_poweroff_8812au(
IN PADAPTER Adapter
)
{
u8 u1bTmp;
u8 bMacPwrCtrlOn = _FALSE;
u16 utemp, ori_fsmc0;
rtw_hal_get_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
if (bMacPwrCtrlOn == _FALSE)
return ;
ori_fsmc0 = utemp = rtw_read16(Adapter, REG_APS_FSMCO);
rtw_write16(Adapter, REG_APS_FSMCO, utemp & ~0x8000);
RTW_INFO(" %s\n", __FUNCTION__);
/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
u1bTmp = rtw_read8(Adapter, REG_TX_RPT_CTRL);
rtw_write8(Adapter, REG_TX_RPT_CTRL, u1bTmp & (~BIT1));
/* stop rx */
rtw_write8(Adapter, REG_CR, 0x0);
/* Run LPS WL RFOFF flow */
if (IS_HARDWARE_TYPE_8821U(Adapter))
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8821A_NIC_LPS_ENTER_FLOW);
else
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8812_NIC_LPS_ENTER_FLOW);
if ((rtw_read8(Adapter, REG_MCUFWDL) & RAM_DL_SEL) &&
GET_HAL_DATA(Adapter)->bFWReady) /* 8051 RAM code */
_8051Reset8812(Adapter);
/* Reset MCU. Suggested by Filen. 2011.01.26. by tynli. */
u1bTmp = rtw_read8(Adapter, REG_SYS_FUNC_EN + 1);
rtw_write8(Adapter, REG_SYS_FUNC_EN + 1, (u1bTmp & (~BIT2)));
/* MCUFWDL 0x80[1:0]=0 */ /* reset MCU ready status */
rtw_write8(Adapter, REG_MCUFWDL, 0x00);
/* Card disable power action flow */
if (IS_HARDWARE_TYPE_8821U(Adapter))
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8821A_NIC_DISABLE_FLOW);
else
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8812_NIC_DISABLE_FLOW);
bMacPwrCtrlOn = _FALSE;
rtw_hal_set_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
GET_HAL_DATA(Adapter)->bFWReady = _FALSE;
if (ori_fsmc0 & 0x8000) {
utemp = rtw_read16(Adapter, REG_APS_FSMCO);
rtw_write16(Adapter, REG_APS_FSMCO, utemp | 0x8000);
}
}
static void rtl8812au_hw_power_down(_adapter *padapter)
{
/* 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c. */
/* Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. */
/* Enable register area 0x0-0xc. */
rtw_write8(padapter, REG_RSV_CTRL, 0x0);
rtw_write16(padapter, REG_APS_FSMCO, 0x8812);
}
u32 rtl8812au_hal_deinit(PADAPTER Adapter)
{
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter);
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
RTW_INFO("==> %s\n", __FUNCTION__);
#ifdef CONFIG_BT_COEXIST
if (hal_btcoex_IsBtExist(Adapter)) {
RTW_INFO("BT module enable SIC\n");
/* Only under WIN7 we can support selective suspend and enter D3 state when system call halt adapter. */
/* rtw_write16(Adapter, REG_GPIO_MUXCFG, rtw_read16(Adapter, REG_GPIO_MUXCFG)|BIT12); */
/* 2010/10/13 MH If we enable SIC in the position and then call _ResetDigitalProcedure1. in XP, */
/* the system will hang due to 8051 reset fail. */
} else
#endif /* CONFIG_BT_COEXIST */
{
rtw_write16(Adapter, REG_GPIO_MUXCFG, rtw_read16(Adapter, REG_GPIO_MUXCFG) & (~BIT12));
}
if (pHalData->bSupportUSB3 == _TRUE) {
/* set Reg 0xf008[3:4] to 2'11 to eable U1/U2 Mode in USB3.0. added by page, 20120712 */
rtw_write8(Adapter, 0xf008, rtw_read8(Adapter, 0xf008) | 0x18);
}
rtw_write32(Adapter, REG_HISR0_8812, 0xFFFFFFFF);
rtw_write32(Adapter, REG_HISR1_8812, 0xFFFFFFFF);
rtw_write32(Adapter, REG_HIMR0_8812, IMR_DISABLED_8812);
rtw_write32(Adapter, REG_HIMR1_8812, IMR_DISABLED_8812);
#ifdef SUPPORT_HW_RFOFF_DETECTED
RTW_INFO("bkeepfwalive(%x)\n", pwrctl->bkeepfwalive);
if (pwrctl->bkeepfwalive) {
_ps_close_RF(Adapter);
if ((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown))
rtl8812au_hw_power_down(Adapter);
} else
#endif
{
if (rtw_is_hw_init_completed(Adapter)) {
rtw_hal_power_off(Adapter);
if ((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown))
rtl8812au_hw_power_down(Adapter);
}
}
return _SUCCESS;
}
unsigned int rtl8812au_inirp_init(PADAPTER Adapter)
{
u8 i;
struct recv_buf *precvbuf;
uint status;
struct dvobj_priv *pdev = adapter_to_dvobj(Adapter);
struct intf_hdl *pintfhdl = &Adapter->iopriv.intf;
struct recv_priv *precvpriv = &(Adapter->recvpriv);
u32(*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u32(*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr);
#endif
_read_port = pintfhdl->io_ops._read_port;
status = _SUCCESS;
precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR;
/* issue Rx irp to receive data */
precvbuf = (struct recv_buf *)precvpriv->precv_buf;
for (i = 0; i < NR_RECVBUFF; i++) {
if (_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE) {
status = _FAIL;
goto exit;
}
precvbuf++;
precvpriv->free_recv_buf_queue_cnt--;
}
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
if (pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX] != 0x07) {
status = _FAIL;
RTW_INFO("%s =>Warning !! Have not USB Int-IN pipe, RtIntInPipe(%d)!!!\n", __func__, pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX]);
goto exit;
}
_read_interrupt = pintfhdl->io_ops._read_interrupt;
if (_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE) {
status = _FAIL;
}
#endif
exit:
return status;
}
unsigned int rtl8812au_inirp_deinit(PADAPTER Adapter)
{
rtw_read_port_cancel(Adapter);
return _SUCCESS;
}
/* -------------------------------------------------------------------
*
* EEPROM/EFUSE Content Parsing
*
* ------------------------------------------------------------------- */
VOID
hal_ReadIDs_8812AU(
IN PADAPTER Adapter,
IN pu1Byte PROMContent,
IN BOOLEAN AutoloadFail
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
if (!AutoloadFail) {
/* VID, PID */
if (IS_HARDWARE_TYPE_8812AU(Adapter)) {
pHalData->EEPROMVID = ReadLE2Byte(&PROMContent[EEPROM_VID_8812AU]);
pHalData->EEPROMPID = ReadLE2Byte(&PROMContent[EEPROM_PID_8812AU]);
} else if (IS_HARDWARE_TYPE_8821U(Adapter))
{
pHalData->EEPROMVID = ReadLE2Byte(&PROMContent[EEPROM_VID_8821AU]);
pHalData->EEPROMPID = ReadLE2Byte(&PROMContent[EEPROM_PID_8821AU]);
}
/* Customer ID, 0x00 and 0xff are reserved for Realtek. */
pHalData->EEPROMCustomerID = *(u8 *)&PROMContent[EEPROM_CustomID_8812];
pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
} else {
pHalData->EEPROMVID = EEPROM_Default_VID;
pHalData->EEPROMPID = EEPROM_Default_PID;
/* Customer ID, 0x00 and 0xff are reserved for Realtek. */
pHalData->EEPROMCustomerID = EEPROM_Default_CustomerID;
pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
}
if ((pHalData->EEPROMVID == 0x050D) && (pHalData->EEPROMPID == 0x1106)) /* SerComm for Belkin. */
pHalData->CustomerID = RT_CID_819x_Sercomm_Belkin;
else if ((pHalData->EEPROMVID == 0x0846) && (pHalData->EEPROMPID == 0x9051)) /* SerComm for Netgear. */
pHalData->CustomerID = RT_CID_819x_Sercomm_Netgear;
else if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330e)) /* add by ylb 20121012 for customer led for alpha */
pHalData->CustomerID = RT_CID_819x_ALPHA_Dlink;
else if ((pHalData->EEPROMVID == 0x0B05) && (pHalData->EEPROMPID == 0x17D2)) /* Edimax for ASUS */
pHalData->CustomerID = RT_CID_819x_Edimax_ASUS;
else if ((pHalData->EEPROMVID == 0x0846) && (pHalData->EEPROMPID == 0x9052))
pHalData->CustomerID = RT_CID_NETGEAR;
else if ((pHalData->EEPROMVID == 0x0411) && ((pHalData->EEPROMPID == 0x0242) || (pHalData->EEPROMPID == 0x025D)))
pHalData->CustomerID = RT_CID_DNI_BUFFALO;
else if (((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3314)) ||
((pHalData->EEPROMVID == 0x20F4) && (pHalData->EEPROMPID == 0x804B)) ||
((pHalData->EEPROMVID == 0x20F4) && (pHalData->EEPROMPID == 0x805B)) ||
((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3315)) ||
((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3316)))
pHalData->CustomerID = RT_CID_DLINK;
RTW_INFO("VID = 0x%04X, PID = 0x%04X\n", pHalData->EEPROMVID, pHalData->EEPROMPID);
RTW_INFO("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n", pHalData->EEPROMCustomerID, pHalData->EEPROMSubCustomerID);
}
VOID
hal_InitPGData_8812A(
IN PADAPTER padapter,
IN OUT u8 *PROMContent
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
u32 i;
u16 value16;
if (_FALSE == pHalData->bautoload_fail_flag) {
/* autoload OK. */
if (is_boot_from_eeprom(padapter)) {
/* Read all Content from EEPROM or EFUSE. */
for (i = 0; i < HWSET_MAX_SIZE_JAGUAR; i += 2) {
/* value16 = EF2Byte(ReadEEprom(pAdapter, (u2Byte) (i>>1))); */
/* *((u16*)(&PROMContent[i])) = value16; */
}
} else {
/* */
/* 2013/03/08 MH Add for 8812A HW limitation, ROM code can only */
/* */
if (IS_HARDWARE_TYPE_8812AU(padapter)) {
u8 efuse_content[4];
efuse_OneByteRead(padapter, 0x200, &efuse_content[0], _FALSE);
efuse_OneByteRead(padapter, 0x202, &efuse_content[1], _FALSE);
efuse_OneByteRead(padapter, 0x204, &efuse_content[2], _FALSE);
efuse_OneByteRead(padapter, 0x210, &efuse_content[3], _FALSE);
if (efuse_content[0] != 0xFF ||
efuse_content[1] != 0xFF ||
efuse_content[2] != 0xFF ||
efuse_content[3] != 0xFF) {
/* DbgPrint("Disable FW ofl load\n"); */
/* pMgntInfo->RegFWOffload = FALSE; */
}
}
/* Read EFUSE real map to shadow. */
EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, _FALSE);
}
} else {
/* autoload fail */
/* pHalData->AutoloadFailFlag = _TRUE; */
/* */
/* 2013/03/08 MH Add for 8812A HW limitation, ROM code can only */
/* */
if (IS_HARDWARE_TYPE_8812AU(padapter)) {
u8 efuse_content[4];
efuse_OneByteRead(padapter, 0x200, &efuse_content[0], _FALSE);
efuse_OneByteRead(padapter, 0x202, &efuse_content[1], _FALSE);
efuse_OneByteRead(padapter, 0x204, &efuse_content[2], _FALSE);
efuse_OneByteRead(padapter, 0x210, &efuse_content[3], _FALSE);
if (efuse_content[0] != 0xFF ||
efuse_content[1] != 0xFF ||
efuse_content[2] != 0xFF ||
efuse_content[3] != 0xFF) {
/* DbgPrint("Disable FW ofl load\n"); */
/* pMgntInfo->RegFWOffload = FALSE; */
pHalData->bautoload_fail_flag = _FALSE;
} else {
/* DbgPrint("EFUSE_Read1Byte(pAdapter, (u2Byte)512) = %x\n", EFUSE_Read1Byte(pAdapter, (u2Byte)512)); */
}
}
/* update to default value 0xFF */
if (!is_boot_from_eeprom(padapter))
EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, _FALSE);
}
#ifdef CONFIG_EFUSE_CONFIG_FILE
if (check_phy_efuse_tx_power_info_valid(padapter) == _FALSE) {
if (Hal_readPGDataFromConfigFile(padapter) != _SUCCESS)
RTW_ERR("invalid phy efuse and read from file fail, will use driver default!!\n");
}
#endif
}
VOID
hal_CustomizedBehavior_8812AU(
IN PADAPTER Adapter
)
{
#ifdef CONFIG_RTW_SW_LED
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct led_priv *pledpriv = adapter_to_led(Adapter);
/* Led mode */
switch (pHalData->CustomerID) {
case RT_CID_DEFAULT:
pledpriv->LedStrategy = SW_LED_MODE9;
pledpriv->bRegUseLed = _TRUE;
break;
case RT_CID_819x_HP:
pledpriv->LedStrategy = SW_LED_MODE6; /* Customize Led mode */
break;
case RT_CID_819x_Sercomm_Belkin:
pledpriv->LedStrategy = SW_LED_MODE9;
break;
case RT_CID_819x_Sercomm_Netgear:
pledpriv->LedStrategy = SW_LED_MODE10;
break;
case RT_CID_819x_ALPHA_Dlink: /* add by ylb 20121012 for customer led for alpha */
pledpriv->LedStrategy = SW_LED_MODE1;
break;
case RT_CID_819x_Edimax_ASUS:
pledpriv->LedStrategy = SW_LED_MODE11;
break;
case RT_CID_WNC_NEC:
pledpriv->LedStrategy = SW_LED_MODE12;
break;
case RT_CID_NETGEAR:
pledpriv->LedStrategy = SW_LED_MODE13;
break;
case RT_CID_DNI_BUFFALO:
pledpriv->LedStrategy = SW_LED_MODE14;
break;
case RT_CID_DLINK:
pledpriv->LedStrategy = SW_LED_MODE15;
break;
default:
pledpriv->LedStrategy = SW_LED_MODE9;
break;
}
pHalData->bLedOpenDrain = _TRUE;/* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */
#endif
}
static void
hal_CustomizeByCustomerID_8812AU(
IN PADAPTER pAdapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
/* For customized behavior. */
if ((pHalData->EEPROMVID == 0x103C) && (pHalData->EEPROMPID == 0x1629)) /* HP Lite-On for RTL8188CUS Slim Combo. */
pHalData->CustomerID = RT_CID_819x_HP;
else if ((pHalData->EEPROMVID == 0x9846) && (pHalData->EEPROMPID == 0x9041))
pHalData->CustomerID = RT_CID_NETGEAR;
else if ((pHalData->EEPROMVID == 0x2019) && (pHalData->EEPROMPID == 0x1201))
pHalData->CustomerID = RT_CID_PLANEX;
else if ((pHalData->EEPROMVID == 0x0BDA) && (pHalData->EEPROMPID == 0x5088))
pHalData->CustomerID = RT_CID_CC_C;
else if ((pHalData->EEPROMVID == 0x0411) && ((pHalData->EEPROMPID == 0x0242) || (pHalData->EEPROMPID == 0x025D)))
pHalData->CustomerID = RT_CID_DNI_BUFFALO;
else if (((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3314)) ||
((pHalData->EEPROMVID == 0x20F4) && (pHalData->EEPROMPID == 0x804B)) ||
((pHalData->EEPROMVID == 0x20F4) && (pHalData->EEPROMPID == 0x805B)) ||
((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3315)) ||
((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3316)))
pHalData->CustomerID = RT_CID_DLINK;
RTW_INFO("PID= 0x%x, VID= %x\n", pHalData->EEPROMPID, pHalData->EEPROMVID);
/* Decide CustomerID according to VID/DID or EEPROM */
switch (pHalData->EEPROMCustomerID) {
case EEPROM_CID_DEFAULT:
if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3308))
pHalData->CustomerID = RT_CID_DLINK;
else if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3309))
pHalData->CustomerID = RT_CID_DLINK;
else if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330a))
pHalData->CustomerID = RT_CID_DLINK;
else if ((pHalData->EEPROMVID == 0x0BFF) && (pHalData->EEPROMPID == 0x8160)) {
/* pHalData->bAutoConnectEnable = _FALSE; */
pHalData->CustomerID = RT_CID_CHINA_MOBILE;
} else if ((pHalData->EEPROMVID == 0x0BDA) && (pHalData->EEPROMPID == 0x5088))
pHalData->CustomerID = RT_CID_CC_C;
else if ((pHalData->EEPROMVID == 0x0846) && (pHalData->EEPROMPID == 0x9052))
pHalData->CustomerID = RT_CID_NETGEAR;
else if ((pHalData->EEPROMVID == 0x0411) && ((pHalData->EEPROMPID == 0x0242) || (pHalData->EEPROMPID == 0x025D)))
pHalData->CustomerID = RT_CID_DNI_BUFFALO;
else if (((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3314)) ||
((pHalData->EEPROMVID == 0x20F4) && (pHalData->EEPROMPID == 0x804B)) ||
((pHalData->EEPROMVID == 0x20F4) && (pHalData->EEPROMPID == 0x805B)) ||
((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3315)) ||
((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3316)))
pHalData->CustomerID = RT_CID_DLINK;
RTW_INFO("PID= 0x%x, VID= %x\n", pHalData->EEPROMPID, pHalData->EEPROMVID);
break;
case EEPROM_CID_WHQL:
/* padapter->bInHctTest = TRUE; */
/* pMgntInfo->bSupportTurboMode = FALSE; */
/* pMgntInfo->bAutoTurboBy8186 = FALSE; */
/* pMgntInfo->PowerSaveControl.bInactivePs = FALSE; */
/* pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE; */
/* pMgntInfo->PowerSaveControl.bLeisurePs = FALSE; */
/* pMgntInfo->PowerSaveControl.bLeisurePsModeBackup = FALSE; */
/* pMgntInfo->keepAliveLevel = 0; */
/* padapter->bUnloadDriverwhenS3S4 = FALSE; */
break;
default:
pHalData->CustomerID = RT_CID_DEFAULT;
break;
}
RTW_INFO("Customer ID: 0x%2x\n", pHalData->CustomerID);
hal_CustomizedBehavior_8812AU(pAdapter);
}
VOID
hal_ReadUsbModeSwitch_8812AU(
IN PADAPTER Adapter,
IN u8 *PROMContent,
IN BOOLEAN AutoloadFail
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
if (AutoloadFail)
pHalData->EEPROMUsbSwitch = _FALSE;
else
/* check efuse 0x08 bit2 */
pHalData->EEPROMUsbSwitch = (PROMContent[EEPROM_USB_MODE_8812] & BIT1) >> 1;
RTW_INFO("Usb Switch: %d\n", pHalData->EEPROMUsbSwitch);
}
static VOID
ReadLEDSetting_8812AU(
IN PADAPTER Adapter,
IN u8 *PROMContent,
IN BOOLEAN AutoloadFail
)
{
#ifdef CONFIG_RTW_LED
struct led_priv *pledpriv = adapter_to_led(Adapter);
#ifdef CONFIG_RTW_SW_LED
pledpriv->bRegUseLed = _TRUE;
#else /* HW LED */
pledpriv->LedStrategy = HW_LED;
#endif /* CONFIG_RTW_SW_LED */
#endif
}
VOID
InitAdapterVariablesByPROM_8812AU(
IN PADAPTER Adapter
)
{
PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
hal_InitPGData_8812A(Adapter, pHalData->efuse_eeprom_data);
Hal_EfuseParseIDCode8812A(Adapter, pHalData->efuse_eeprom_data);
Hal_ReadPROMVersion8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_ReadIDs_8812AU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_config_macaddr(Adapter, pHalData->bautoload_fail_flag);
Hal_ReadTxPowerInfo8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadBoardType8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
/* */
/* Read Bluetooth co-exist and initialize */
/* */
Hal_EfuseParseBTCoexistInfo8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadChannelPlan8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_EfuseParseXtal_8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadThermalMeter_8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadRemoteWakeup_8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadAntennaDiversity8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
if (IS_HARDWARE_TYPE_8821U(Adapter))
Hal_ReadPAType_8821A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
else {
Hal_ReadAmplifierType_8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadRFEType_8812A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
}
hal_ReadUsbModeSwitch_8812AU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_CustomizeByCustomerID_8812AU(Adapter);
ReadLEDSetting_8812AU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
/* 2013/04/15 MH Add for different board type recognize. */
hal_ReadUsbType_8812AU(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
if (IS_HARDWARE_TYPE_8821U(Adapter))
Hal_EfuseParseKFreeData_8821A(Adapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
/* set coex. ant info once efuse parsing is done */
rtw_btcoex_set_ant_info(Adapter);
}
static void Hal_ReadPROMContent_8812A(
IN PADAPTER Adapter
)
{
PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
u8 eeValue;
/* check system boot selection */
eeValue = rtw_read8(Adapter, REG_9346CR);
pHalData->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? _TRUE : _FALSE;
pHalData->bautoload_fail_flag = (eeValue & EEPROM_EN) ? _FALSE : _TRUE;
RTW_INFO("Boot from %s, Autoload %s !\n", (pHalData->EepromOrEfuse ? "EEPROM" : "EFUSE"),
(pHalData->bautoload_fail_flag ? "Fail" : "OK"));
/* pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE; */
InitAdapterVariablesByPROM_8812AU(Adapter);
}
u8
ReadAdapterInfo8812AU(
IN PADAPTER Adapter
)
{
/* Read all content in Efuse/EEPROM. */
Hal_ReadPROMContent_8812A(Adapter);
/* We need to define the RF type after all PROM value is recognized. */
ReadRFType8812A(Adapter);
return _SUCCESS;
}
void UpdateInterruptMask8812AU(PADAPTER padapter, u8 bHIMR0 , u32 AddMSR, u32 RemoveMSR)
{
HAL_DATA_TYPE *pHalData;
u32 *himr;
pHalData = GET_HAL_DATA(padapter);
if (bHIMR0)
himr = &(pHalData->IntrMask[0]);
else
himr = &(pHalData->IntrMask[1]);
if (AddMSR)
*himr |= AddMSR;
if (RemoveMSR)
*himr &= (~RemoveMSR);
if (bHIMR0)
rtw_write32(padapter, REG_HIMR0_8812, *himr);
else
rtw_write32(padapter, REG_HIMR1_8812, *himr);
}
u8 SetHwReg8812AU(PADAPTER Adapter, u8 variable, u8 *val)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter);
struct registry_priv *registry_par = &Adapter->registrypriv;
u8 ret = _SUCCESS;
switch (variable) {
case HW_VAR_RXDMA_AGG_PG_TH:
#ifdef CONFIG_USB_RX_AGGREGATION
{
/*u8 threshold = *((u8 *)val);
if( threshold == 0)
{
threshold = pHalData->UsbRxAggPageCount;
}
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold);*/
}
#endif
break;
case HW_VAR_SET_RPWM:
#ifdef CONFIG_LPS_LCLK
{
u8 ps_state = *((u8 *)val);
/*rpwm value only use BIT0(clock bit) ,BIT6(Ack bit), and BIT7(Toggle bit) for 88e.
BIT0 value - 1: 32k, 0:40MHz.
BIT6 value - 1: report cpwm value after success set, 0:do not report.
BIT7 value - Toggle bit change.
modify by Thomas. 2012/4/2.*/
ps_state = ps_state & 0xC1;
/*RTW_INFO("##### Change RPWM value to = %x for switch clk #####\n", ps_state);*/
rtw_write8(Adapter, REG_USB_HRPWM, ps_state);
}
#endif
#ifdef CONFIG_AP_WOWLAN
if (pwrctl->wowlan_ap_mode == _TRUE) {
u8 ps_state = *((u8 *)val);
RTW_INFO("%s, RPWM\n", __func__);
ps_state = ps_state & 0xC1;
rtw_write8(Adapter, REG_USB_HRPWM, ps_state);
}
#endif
break;
case HW_VAR_USB_MODE:
/* U2 to U3 */
if (registry_par->switch_usb_mode == 1) {
if (IS_HIGH_SPEED_USB(Adapter)) {
if ((rtw_read8(Adapter, 0x74) & (BIT(2) | BIT(3))) != BIT(3)) {
rtw_write8(Adapter, 0x74, 0x8);
rtw_write8(Adapter, 0x70, 0x2);
rtw_write8(Adapter, 0x3e, 0x1);
rtw_write8(Adapter, 0x3d, 0x3);
/* usb disconnect */
rtw_write8(Adapter, 0x5, 0x80);
*val = _TRUE;
}
} else if (IS_SUPER_SPEED_USB(Adapter)) {
rtw_write8(Adapter, 0x70, rtw_read8(Adapter, 0x70) & (~BIT(1)));
rtw_write8(Adapter, 0x3e, rtw_read8(Adapter, 0x3e) & (~BIT(0)));
}
} else if (registry_par->switch_usb_mode == 2) {
/* U3 to U2 */
if (IS_SUPER_SPEED_USB(Adapter)) {
if ((rtw_read8(Adapter, 0x74) & (BIT(2) | BIT(3))) != BIT(2)) {
rtw_write8(Adapter, 0x74, 0x4);
rtw_write8(Adapter, 0x70, 0x2);
rtw_write8(Adapter, 0x3e, 0x1);
rtw_write8(Adapter, 0x3d, 0x3);
/* usb disconnect */
rtw_write8(Adapter, 0x5, 0x80);
*val = _TRUE;
}
} else if (IS_HIGH_SPEED_USB(Adapter)) {
rtw_write8(Adapter, 0x70, rtw_read8(Adapter, 0x70) & (~BIT(1)));
rtw_write8(Adapter, 0x3e, rtw_read8(Adapter, 0x3e) & (~BIT(0)));
}
}
break;
default:
ret = SetHwReg8812A(Adapter, variable, val);
break;
}
return ret;
}
void GetHwReg8812AU(PADAPTER Adapter, u8 variable, u8 *val)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
switch (variable) {
case HW_VAR_CPWM:
#ifdef CONFIG_LPS_LCLK
*val = rtw_read8(Adapter, REG_USB_HCPWM);
/*
RTW_INFO("##### REG_USB_HCPWM(0x%02x) = 0x%02x #####\n",
REG_USB_HCPWM, *val);
*/
#endif /* CONFIG_LPS_LCLK */
break;
case HW_VAR_RPWM_TOG:
#ifdef CONFIG_LPS_LCLK
*val = rtw_read8(Adapter, REG_USB_HRPWM) & BIT7;
#endif /* CONFIG_LPS_LCLK */
break;
default:
GetHwReg8812A(Adapter, variable, val);
break;
}
}
/*
* Description:
* Change default setting of specified variable.
* */
u8
SetHalDefVar8812AUsb(
IN PADAPTER Adapter,
IN HAL_DEF_VARIABLE eVariable,
IN PVOID pValue
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 bResult = _SUCCESS;
switch (eVariable) {
default:
SetHalDefVar8812A(Adapter, eVariable, pValue);
break;
}
return bResult;
}
/*
* Description:
* Query setting of specified variable.
* */
u8
GetHalDefVar8812AUsb(
IN PADAPTER Adapter,
IN HAL_DEF_VARIABLE eVariable,
IN PVOID pValue
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 bResult = _SUCCESS;
switch (eVariable) {
default:
GetHalDefVar8812A(Adapter, eVariable, pValue);
break;
}
return bResult;
}
void _update_response_rate(_adapter *padapter, unsigned int mask)
{
u8 RateIndex = 0;
/* Set RRSR rate table. */
rtw_write8(padapter, REG_RRSR, mask & 0xff);
rtw_write8(padapter, REG_RRSR + 1, (mask >> 8) & 0xff);
/* Set RTS initial rate */
while (mask > 0x1) {
mask = (mask >> 1);
RateIndex++;
}
rtw_write8(padapter, REG_INIRTS_RATE_SEL, RateIndex);
}
static void rtl8812au_init_default_value(_adapter *padapter)
{
PHAL_DATA_TYPE pHalData;
pHalData = GET_HAL_DATA(padapter);
InitDefaultValue8821A(padapter);
pHalData->IntrMask[0] = (u32)(\
/* IMR_ROK | */
/* IMR_RDU | */
/* IMR_VODOK | */
/* IMR_VIDOK | */
/* IMR_BEDOK | */
/* IMR_BKDOK | */
/* IMR_MGNTDOK | */
/* IMR_HIGHDOK | */
/* IMR_CPWM | */
/* IMR_CPWM2 | */
/* IMR_C2HCMD | */
/* IMR_HISR1_IND_INT | */
/* IMR_ATIMEND | */
/* IMR_BCNDMAINT_E | */
/* IMR_HSISR_IND_ON_INT | */
/* IMR_BCNDOK0 | */
/* IMR_BCNDMAINT0 | */
/* IMR_TSF_BIT32_TOGGLE | */
/* IMR_TXBCN0OK | */
/* IMR_TXBCN0ERR | */
/* IMR_GTINT3 | */
/* IMR_GTINT4 | */
/* IMR_TXCCK | */
0);
pHalData->IntrMask[1] = (u32)(\
/* IMR_RXFOVW | */
/* IMR_TXFOVW | */
/* IMR_RXERR | */
/* IMR_TXERR | */
/* IMR_ATIMEND_E | */
/* IMR_BCNDOK1 | */
/* IMR_BCNDOK2 | */
/* IMR_BCNDOK3 | */
/* IMR_BCNDOK4 | */
/* IMR_BCNDOK5 | */
/* IMR_BCNDOK6 | */
/* IMR_BCNDOK7 | */
/* IMR_BCNDMAINT1 | */
/* IMR_BCNDMAINT2 | */
/* IMR_BCNDMAINT3 | */
/* IMR_BCNDMAINT4 | */
/* IMR_BCNDMAINT5 | */
/* IMR_BCNDMAINT6 | */
/* IMR_BCNDMAINT7 | */
0);
}
static u8 rtl8812au_ps_func(PADAPTER Adapter, HAL_INTF_PS_FUNC efunc_id, u8 *val)
{
u8 bResult = _TRUE;
switch (efunc_id) {
#if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED)
case HAL_USB_SELECT_SUSPEND: {
u8 bfwpoll = *((u8 *)val);
/* rtl8188e_set_FwSelectSuspend_cmd(Adapter,bfwpoll ,500); */ /* note fw to support hw power down ping detect */
}
break;
#endif /* CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED */
default:
break;
}
return bResult;
}
void rtl8812au_set_hal_ops(_adapter *padapter)
{
struct hal_ops *pHalFunc = &padapter->hal_func;
pHalFunc->hal_power_on = _InitPowerOn_8812AU;
pHalFunc->hal_power_off = hal_poweroff_8812au;
pHalFunc->hal_init = &rtl8812au_hal_init;
pHalFunc->hal_deinit = &rtl8812au_hal_deinit;
pHalFunc->inirp_init = &rtl8812au_inirp_init;
pHalFunc->inirp_deinit = &rtl8812au_inirp_deinit;
pHalFunc->init_xmit_priv = &rtl8812au_init_xmit_priv;
pHalFunc->free_xmit_priv = &rtl8812au_free_xmit_priv;
pHalFunc->init_recv_priv = &rtl8812au_init_recv_priv;
pHalFunc->free_recv_priv = &rtl8812au_free_recv_priv;
#ifdef CONFIG_RTW_SW_LED
pHalFunc->InitSwLeds = &rtl8812au_InitSwLeds;
pHalFunc->DeInitSwLeds = &rtl8812au_DeInitSwLeds;
#endif/* CONFIG_RTW_SW_LED */
pHalFunc->init_default_value = &rtl8812au_init_default_value;
pHalFunc->intf_chip_configure = &rtl8812au_interface_configure;
pHalFunc->read_adapter_info = &ReadAdapterInfo8812AU;
pHalFunc->set_hw_reg_handler = &SetHwReg8812AU;
pHalFunc->GetHwRegHandler = &GetHwReg8812AU;
pHalFunc->get_hal_def_var_handler = &GetHalDefVar8812AUsb;
pHalFunc->SetHalDefVarHandler = &SetHalDefVar8812AUsb;
pHalFunc->hal_xmit = &rtl8812au_hal_xmit;
pHalFunc->mgnt_xmit = &rtl8812au_mgnt_xmit;
pHalFunc->hal_xmitframe_enqueue = &rtl8812au_hal_xmitframe_enqueue;
#ifdef CONFIG_HOSTAPD_MLME
pHalFunc->hostap_mgnt_xmit_entry = &rtl8812au_hostap_mgnt_xmit_entry;
#endif
pHalFunc->interface_ps_func = &rtl8812au_ps_func;
#ifdef CONFIG_XMIT_THREAD_MODE
pHalFunc->xmit_thread_handler = &rtl8812au_xmit_buf_handler;
#endif
#ifdef CONFIG_SUPPORT_USB_INT
pHalFunc->interrupt_handler = interrupt_handler_8812au;
#endif
rtl8812_set_hal_ops(pHalFunc);
}
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags