Orange Pi5 kernel

Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards

‎ 3 Commits   0 Branches   0 Tags
Index
Trunk
Branches
Tags
Trunk
Branches
Tags
Home page
Home page
orangepi/linux-orangepi-5.10.y.git/trunk/drivers/net/wireless/rtl8811cu/include/autoconf.h
log
diff
blame
/******************************************************************************
 *
 * Copyright(c) 2007 - 2017 Realtek Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 *****************************************************************************/
/*#define CONFIG_DISABLE_ODM*/
/*#define CONFIG_NO_FW*/

/*
 * Public  General Config
 */
#define AUTOCONF_INCLUDED
#define RTL871X_MODULE_NAME "8821CU"
#define DRV_NAME "rtl8821cu"

/* Set CONFIG_RTL8821C from Makefile */
#ifndef CONFIG_RTL8821C
#define CONFIG_RTL8821C
#endif
#define CONFIG_USB_HCI
#define PLATFORM_LINUX

/*
 * Wi-Fi Functions Config
 */

#define CONFIG_IEEE80211_BAND_5GHZ

#define CONFIG_80211N_HT
#define CONFIG_80211AC_VHT
#ifdef CONFIG_80211AC_VHT
	#ifndef CONFIG_80211N_HT
		#define CONFIG_80211N_HT
	#endif
#endif

#ifdef CONFIG_80211N_HT
	/* #define CONFIG_BEAMFORMING */
#endif

/* set CONFIG_IOCTL_CFG80211 from Makefile */
#ifdef CONFIG_IOCTL_CFG80211
	/*
	 * Indecate new sta asoc through cfg80211_new_sta
	 * If kernel version >= 3.2 or
	 * version < 3.2 but already apply cfg80211 patch,
	 * RTW_USE_CFG80211_STA_EVENT must be defiend!
	 */
	/* Set RTW_USE_CFG80211_STA_EVENT from Makefile */
	/* #define RTW_USE_CFG80211_STA_EVENT */ /* Indecate new sta asoc through cfg80211_new_sta */
	#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
	/* #define CONFIG_DEBUG_CFG80211 */
	/* #define CONFIG_DRV_ISSUE_PROV_REQ */ /* IOT FOR S2 */
	#define CONFIG_SET_SCAN_DENY_TIMER
#endif

/*
 * Internal  General Config
 */
/* #define CONFIG_H2CLBK */

#define RTW_HALMAC		/* Use HALMAC architecture, necessary for 8821C */
#define CONFIG_EMBEDDED_FWIMG
/* #define CONFIG_FILE_FWIMG */

#define CONFIG_XMIT_ACK
#ifdef CONFIG_XMIT_ACK
	#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
#endif

#define CONFIG_RECV_REORDERING_CTRL

#define CONFIG_DFS

 /* #define CONFIG_SUPPORT_USB_INT */
 #ifdef CONFIG_SUPPORT_USB_INT
/* #define CONFIG_USB_INTERRUPT_IN_PIPE*/
#endif
#ifdef CONFIG_POWER_SAVING
#define CONFIG_IPS
#ifdef CONFIG_IPS
/* #define CONFIG_IPS_LEVEL_2*/ /*enable this to set default IPS mode to IPS_LEVEL_2*/
#define CONFIG_IPS_CHECK_IN_WD /* Do IPS Check in WatchDog.	*/
#endif
/* #define SUPPORT_HW_RFOFF_DETECTED*/

#define CONFIG_LPS
#if defined(CONFIG_LPS)
/* #define CONFIG_LPS_LCLK*/
#endif

#ifdef CONFIG_LPS_LCLK
	#ifdef CONFIG_POWER_SAVING
		/* #define CONFIG_XMIT_THREAD_MODE */
	#endif
	#ifndef CONFIG_SUPPORT_USB_INT
		#define LPS_RPWM_WAIT_MS 300
		#define CONFIG_DETECT_CPWM_BY_POLLING
	#endif /* !CONFIG_SUPPORT_USB_INT */
	/* #define DBG_CHECK_FW_PS_STATE */
#endif

	#ifdef CONFIG_LPS
		#define CONFIG_WMMPS_STA 1
	#endif /* CONFIG_LPS */
#endif /*CONFIG_POWER_SAVING*/
/* before link */
/* #define CONFIG_ANTENNA_DIVERSITY */

/* after link */
#ifdef CONFIG_ANTENNA_DIVERSITY
#define CONFIG_HW_ANTENNA_DIVERSITY
#endif

#define CONFIG_AP_MODE
#ifdef CONFIG_AP_MODE
	/* #define CONFIG_INTERRUPT_BASED_TXBCN */ /* Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs */
	#if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN)
		#undef CONFIG_INTERRUPT_BASED_TXBCN
	#endif
	#ifdef CONFIG_INTERRUPT_BASED_TXBCN
		/* #define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT */
		#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
	#endif

	#define CONFIG_NATIVEAP_MLME
	#ifndef CONFIG_NATIVEAP_MLME
		#define CONFIG_HOSTAPD_MLME
	#endif
	#define CONFIG_FIND_BEST_CHANNEL
#endif

#define CONFIG_P2P
#ifdef CONFIG_P2P
	/* The CONFIG_WFD is for supporting the Wi-Fi display */
	#define CONFIG_WFD

	#define CONFIG_P2P_REMOVE_GROUP_INFO

	/* #define CONFIG_DBG_P2P */

	#define CONFIG_P2P_PS
	/* #define CONFIG_P2P_IPS */
	#define CONFIG_P2P_OP_CHK_SOCIAL_CH
	#define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT  /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */
	/*#define CONFIG_P2P_INVITE_IOT*/
#endif

/*	Added by Kurt 20110511 */
#ifdef CONFIG_TDLS
	#define CONFIG_TDLS_DRIVER_SETUP
/*
	#ifndef CONFIG_WFD
		#define CONFIG_WFD
	#endif
*/
	/* #define CONFIG_TDLS_AUTOSETUP */
	#define CONFIG_TDLS_AUTOCHECKALIVE
	#define CONFIG_TDLS_CH_SW		/* Enable "CONFIG_TDLS_CH_SW" by default, however limit it to only work in wifi logo test mode but not in normal mode currently */
#endif


#define CONFIG_SKB_COPY	/* amsdu */

#define CONFIG_RTW_LED
#ifdef CONFIG_RTW_LED
	#define CONFIG_RTW_SW_LED
	#ifdef CONFIG_RTW_SW_LED
		/* #define CONFIG_RTW_LED_HANDLED_BY_CMD_THREAD */
	#endif
#endif /* CONFIG_RTW_LED */

#define CONFIG_GLOBAL_UI_PID

/*#define CONFIG_RTW_80211K*/

#define CONFIG_LAYER2_ROAMING
#define CONFIG_LAYER2_ROAMING_RESUME
/*#define CONFIG_ADAPTOR_INFO_CACHING_FILE */ /* now just applied on 8192cu only, should make it general... */
/*#define CONFIG_RESUME_IN_WORKQUEUE */
/*#define CONFIG_SET_SCAN_DENY_TIMER */
#define CONFIG_LONG_DELAY_ISSUE
#define CONFIG_NEW_SIGNAL_STAT_PROCESS
/* #define CONFIG_SIGNAL_DISPLAY_DBM */ /*display RX signal with dbm */
#ifdef CONFIG_SIGNAL_DISPLAY_DBM
/* #define CONFIG_BACKGROUND_NOISE_MONITOR */
#endif
#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */

#define CONFIG_TX_MCAST2UNI		/*Support IP multicast->unicast*/
/* #define CONFIG_CHECK_AC_LIFETIME 1 */	/* Check packet lifetime of 4 ACs. */


/*
 * Interface  Related Config
 */

#ifndef CONFIG_MINIMAL_MEMORY_USAGE
	#define CONFIG_USB_TX_AGGREGATION
	#define CONFIG_USB_RX_AGGREGATION
#endif

/* #define CONFIG_REDUCE_USB_TX_INT*/ /* Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. */
/* #define CONFIG_EASY_REPLACEMENT*/

/*
 * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now!
 */
/* #define CONFIG_USE_USB_BUFFER_ALLOC_TX*/	/* Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. */
/* #define CONFIG_USE_USB_BUFFER_ALLOC_RX*/ /* For RX path */
#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX

#else
	#define CONFIG_PREALLOC_RECV_SKB
	#ifdef CONFIG_PREALLOC_RECV_SKB
		/* #define CONFIG_FIX_NR_BULKIN_BUFFER */ /* only use PREALLOC_RECV_SKB buffer, don't alloc skb at runtime */
	#endif
#endif

/*
 * USB VENDOR REQ BUFFER ALLOCATION METHOD
 * if not set we'll use function local variable (stack memory)
 */
/* #define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE */
#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC

#define CONFIG_USB_VENDOR_REQ_MUTEX
#define CONFIG_VENDOR_REQ_RETRY

/* #define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ*/

#ifdef CONFIG_WOWLAN
	#define CONFIG_GTK_OL
	/* #define CONFIG_ARP_KEEP_ALIVE */
#endif /* CONFIG_WOWLAN */

#ifdef CONFIG_GPIO_WAKEUP
	#ifndef WAKEUP_GPIO_IDX
		#define WAKEUP_GPIO_IDX	6	/* WIFI Chip Side */
	#endif /* WAKEUP_GPIO_IDX */
#endif /* CONFIG_GPIO_WAKEUP */

/*
 * HAL  Related Config
 */
/*#define CONFIG_RX_PACKET_APPEND_FCS*/

/*#define CONFIG_ADHOC_WORKAROUND_SETTING*/

#define DISABLE_BB_RF	0

#ifdef CONFIG_MP_INCLUDED
	#define MP_DRIVER 1
	#define CONFIG_MP_IWPRIV_SUPPORT
	/*
	 #undef CONFIG_USB_TX_AGGREGATION
	 #undef CONFIG_USB_RX_AGGREGATION
	*/
#else
	#define MP_DRIVER 0
#endif

/*
 * Platform  Related Config
 */
#if defined(CONFIG_PLATFORM_ACTIONS_ATM702X)
	#ifdef CONFIG_USB_TX_AGGREGATION
		#undef CONFIG_USB_TX_AGGREGATION
	#endif
	#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
		#define CONFIG_USE_USB_BUFFER_ALLOC_TX
	#endif
	#ifndef CONFIG_USE_USB_BUFFER_ALLOC_RX
		#define CONFIG_USE_USB_BUFFER_ALLOC_RX
	#endif
#endif

#ifdef CONFIG_BT_COEXIST
	/* for ODM and outsrc BT-Coex */
	#define BT_30_SUPPORT 1
	#ifndef CONFIG_LPS
		/* download reserved page to FW */
		#define CONFIG_LPS
	#endif
#else /* !CONFIG_BT_COEXIST */
	#define BT_30_SUPPORT 0
#endif /* CONFIG_BT_COEXIST */



#ifdef CONFIG_USB_TX_AGGREGATION
/* #define	CONFIG_TX_EARLY_MODE */
#endif

/*
 * Debug Related Config
 */
#define DBG	1

#define CONFIG_PROC_DEBUG
#define DBG_CONFIG_ERROR_DETECT

/*#define DBG_CONFIG_ERROR_DETECT_INT*/
/*#define DBG_CONFIG_ERROR_RESET*/



/*#define DBG_IO*/
/*#define DBG_DELAY_OS*/
/*#ifndef DBG_MEM_ALLOC*/
/*#define DBG_MEM_ALLOC*/
/*#endif*/
/*#define DBG_MEMORY_LEAK*/
/*#define DBG_IOCTL*/

/*#define DBG_TX*/
/*#define DBG_XMIT_BUF*/
/*#define DBG_XMIT_BUF_EXT*/
/*#define DBG_TX_DROP_FRAME*/

/*#define DBG_RX_DROP_FRAME*/
/*#define DBG_RX_SEQ*/
/*#define DBG_RX_SIGNAL_DISPLAY_PROCESSING*/
/*#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"*/

/*#define DBG_ROAMING_TEST*/

/*#define DBG_HAL_INIT_PROFILING*/
/*#define DBG_FW_DEBUG_MSG_PKT*/  /* FW use this feature to tx debug broadcast pkt. This pkt include FW debug message*/
log
diff
blame
cGit-ui™ 0.1.7
Git™ 2.40.0
Nginx™ 1.22.1

Where any material of this site is being reproduced, published or issued to others the reference to the source is obligatory.

© Andrey V. Kosteltsev, 2019 – 2025.