/******************************************************************************
*
* Copyright(c) 2007 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#define _HCI_HAL_INIT_C_
#include <drv_types.h>
#include <rtl8188e_hal.h>
#include "hal_com_h2c.h"
#ifndef CONFIG_USB_HCI
#error "CONFIG_USB_HCI shall be on!\n"
#endif
static void
_ConfigNormalChipOutEP_8188E(
PADAPTER pAdapter,
u8 NumOutPipe
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
switch (NumOutPipe) {
case 3:
pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_LQ | TX_SELE_NQ;
pHalData->OutEpNumber = 3;
break;
case 2:
pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_NQ;
pHalData->OutEpNumber = 2;
break;
case 1:
pHalData->OutEpQueueSel = TX_SELE_HQ;
pHalData->OutEpNumber = 1;
break;
default:
break;
}
RTW_INFO("%s OutEpQueueSel(0x%02x), OutEpNumber(%d)\n", __FUNCTION__, pHalData->OutEpQueueSel, pHalData->OutEpNumber);
}
static BOOLEAN HalUsbSetQueuePipeMapping8188EUsb(
PADAPTER pAdapter,
u8 NumInPipe,
u8 NumOutPipe
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
BOOLEAN result = _FALSE;
_ConfigNormalChipOutEP_8188E(pAdapter, NumOutPipe);
/* Normal chip with one IN and one OUT doesn't have interrupt IN EP. */
if (1 == pHalData->OutEpNumber) {
if (1 != NumInPipe)
return result;
}
/* All config other than above support one Bulk IN and one Interrupt IN. */
/* if(2 != NumInPipe){ */
/* return result; */
/* } */
result = Hal_MappingOutPipe(pAdapter, NumOutPipe);
return result;
}
void rtl8188eu_interface_configure(_adapter *padapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter);
struct registry_priv *registry_par = &padapter->registrypriv;
if (IS_HIGH_SPEED_USB(padapter)) {
pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;/* 512 bytes */
} else {
pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;/* 64 bytes */
}
pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber;
#ifdef CONFIG_USB_TX_AGGREGATION
pHalData->UsbTxAggMode = 1;
pHalData->UsbTxAggDescNum = 0x1; /* only 4 bits */
#endif
#ifdef CONFIG_USB_RX_AGGREGATION
pHalData->rxagg_mode = registry_par->usb_rxagg_mode;
if ((pHalData->rxagg_mode != RX_AGG_DMA) && (pHalData->rxagg_mode != RX_AGG_USB))
pHalData->rxagg_mode = RX_AGG_DMA;
if (pHalData->rxagg_mode == RX_AGG_DMA) {
pHalData->rxagg_dma_size = 48; /* uint: 128b, 0x0A = 10 = MAX_RX_DMA_BUFFER_SIZE/2/pHalData->UsbBulkOutSize */
pHalData->rxagg_dma_timeout = 0x4; /* 6, absolute time = 34ms/(2^6) */
} else if (pHalData->rxagg_mode == RX_AGG_USB) {
pHalData->rxagg_usb_size = 16; /* unit: 512b */
pHalData->rxagg_usb_timeout = 0x6;
}
#endif
HalUsbSetQueuePipeMapping8188EUsb(padapter,
pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes);
}
static u32 _InitPowerOn_8188EU(_adapter *padapter)
{
u16 value16;
/* HW Power on sequence */
u8 bMacPwrCtrlOn = _FALSE;
rtw_hal_get_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
if (bMacPwrCtrlOn == _TRUE)
return _SUCCESS;
if (!HalPwrSeqCmdParsing(padapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_PWR_ON_FLOW)) {
RTW_ERR("%s: run power on flow fail\n", __func__);
return _FAIL;
}
/* Enable MAC DMA/WMAC/SCHEDULE/SEC block */
/* Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */
rtw_write16(padapter, REG_CR, 0x00); /* suggseted by zhouzhou, by page, 20111230 */
/* Enable MAC DMA/WMAC/SCHEDULE/SEC block */
value16 = rtw_read16(padapter, REG_CR);
value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN
| PROTOCOL_EN | SCHEDULE_EN | ENSEC | CALTMR_EN);
/* for SDIO - Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */
rtw_write16(padapter, REG_CR, value16);
bMacPwrCtrlOn = _TRUE;
rtw_hal_set_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
return _SUCCESS;
}
#ifdef CONFIG_BT_COEXIST
static void _InitBTCoexist(_adapter *padapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist);
u8 u1Tmp;
if (pbtpriv->BT_Coexist && pbtpriv->BT_CoexistType == BT_CSR_BC4) {
/* #if MP_DRIVER != 1 */
if (padapter->registrypriv.mp_mode == 0) {
if (pbtpriv->BT_Ant_isolation) {
rtw_write8(padapter, REG_GPIO_MUXCFG, 0xa0);
RTW_INFO("BT write 0x%x = 0x%x\n", REG_GPIO_MUXCFG, 0xa0);
}
}
/* #endif */
u1Tmp = rtw_read8(padapter, 0x4fd) & BIT0;
u1Tmp = u1Tmp |
((pbtpriv->BT_Ant_isolation == 1) ? 0 : BIT1) |
((pbtpriv->BT_Service == BT_SCO) ? 0 : BIT2);
rtw_write8(padapter, 0x4fd, u1Tmp);
RTW_INFO("BT write 0x%x = 0x%x for non-isolation\n", 0x4fd, u1Tmp);
rtw_write32(padapter, REG_BT_COEX_TABLE + 4, 0xaaaa9aaa);
RTW_INFO("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE + 4, 0xaaaa9aaa);
rtw_write32(padapter, REG_BT_COEX_TABLE + 8, 0xffbd0040);
RTW_INFO("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE + 8, 0xffbd0040);
rtw_write32(padapter, REG_BT_COEX_TABLE + 0xc, 0x40000010);
RTW_INFO("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE + 0xc, 0x40000010);
/* Config to 1T1R */
u1Tmp = rtw_read8(padapter, rOFDM0_TRxPathEnable);
u1Tmp &= ~(BIT1);
rtw_write8(padapter, rOFDM0_TRxPathEnable, u1Tmp);
RTW_INFO("BT write 0xC04 = 0x%x\n", u1Tmp);
u1Tmp = rtw_read8(padapter, rOFDM1_TRxPathEnable);
u1Tmp &= ~(BIT1);
rtw_write8(padapter, rOFDM1_TRxPathEnable, u1Tmp);
RTW_INFO("BT write 0xD04 = 0x%x\n", u1Tmp);
}
}
#endif
/* ---------------------------------------------------------------
*
* MAC init functions
*
* --------------------------------------------------------------- */
/* Shall USB interface init this? */
static void
_InitInterrupt(
PADAPTER Adapter
)
{
u32 imr, imr_ex;
u8 usb_opt;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
struct dvobj_priv *pdev = adapter_to_dvobj(Adapter);
#endif
/* HISR write one to clear */
rtw_write32(Adapter, REG_HISR_88E, 0xFFFFFFFF);
/* HIMR - */
imr = IMR_PSTIMEOUT_88E | IMR_TBDER_88E | IMR_CPWM_88E | IMR_CPWM2_88E ;
rtw_write32(Adapter, REG_HIMR_88E, imr);
pHalData->IntrMask[0] = imr;
imr_ex = IMR_TXERR_88E | IMR_RXERR_88E | IMR_TXFOVW_88E | IMR_RXFOVW_88E;
rtw_write32(Adapter, REG_HIMRE_88E, imr_ex);
pHalData->IntrMask[1] = imr_ex;
#ifdef CONFIG_SUPPORT_USB_INT
/* REG_USB_SPECIAL_OPTION - BIT(4) */
/* 0; Use interrupt endpoint to upload interrupt pkt */
/* 1; Use bulk endpoint to upload interrupt pkt, */
usb_opt = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION);
if ((IS_FULL_SPEED_USB(Adapter))
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
|| (pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX] == 0x05)
#endif
)
usb_opt = usb_opt & (~INT_BULK_SEL);
else
usb_opt = usb_opt | (INT_BULK_SEL);
rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, usb_opt);
#endif/* CONFIG_SUPPORT_USB_INT */
}
static void
_InitQueueReservedPage(
PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u32 outEPNum = (u32)pHalData->OutEpNumber;
u32 numHQ = 0;
u32 numLQ = 0;
u32 numNQ = 0;
u32 numPubQ = 0x00;
u32 value32;
u8 value8;
BOOLEAN bWiFiConfig = pregistrypriv->wifi_spec;
if (bWiFiConfig || pregistrypriv->qos_opt_enable) {
if (pHalData->OutEpQueueSel & TX_SELE_HQ)
numHQ = WMM_NORMAL_PAGE_NUM_HPQ_88E;
if (pHalData->OutEpQueueSel & TX_SELE_LQ)
numLQ = WMM_NORMAL_PAGE_NUM_LPQ_88E;
/* NOTE: This step shall be proceed before writting REG_RQPN. */
if (pHalData->OutEpQueueSel & TX_SELE_NQ)
numNQ = WMM_NORMAL_PAGE_NUM_NPQ_88E;
} else {
if (pHalData->OutEpQueueSel & TX_SELE_HQ)
numHQ = NORMAL_PAGE_NUM_HPQ_88E;
if (pHalData->OutEpQueueSel & TX_SELE_LQ)
numLQ = NORMAL_PAGE_NUM_LPQ_88E;
/* NOTE: This step shall be proceed before writting REG_RQPN. */
if (pHalData->OutEpQueueSel & TX_SELE_NQ)
numNQ = NORMAL_PAGE_NUM_NPQ_88E;
}
value8 = (u8)_NPQ(numNQ);
rtw_write8(Adapter, REG_RQPN_NPQ, value8);
numPubQ = TX_TOTAL_PAGE_NUMBER_88E(Adapter) - numHQ - numLQ - numNQ;
/* TX DMA */
value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN;
rtw_write32(Adapter, REG_RQPN, value32);
}
static void
_InitTxBufferBoundary(
PADAPTER Adapter,
u8 txpktbuf_bndy
)
{
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
/* HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); */
/* u16 txdmactrl; */
rtw_write8(Adapter, REG_BCNQ_BDNY, txpktbuf_bndy);
rtw_write8(Adapter, REG_MGQ_BDNY, txpktbuf_bndy);
rtw_write8(Adapter, REG_WMAC_LBK_BF_HD, txpktbuf_bndy);
rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy);
rtw_write8(Adapter, REG_TDECTRL + 1, txpktbuf_bndy);
}
static void
_InitPageBoundary(
PADAPTER Adapter
)
{
/* RX Page Boundary */
u16 rxff_bndy = 0;
rxff_bndy = MAX_RX_DMA_BUFFER_SIZE_88E(Adapter) - 1;
#if 0
/* RX Page Boundary */
/* srand(static_cast<unsigned int>(time(NULL)) ); */
if (bSupportRemoteWakeUp) {
Offset = MAX_RX_DMA_BUFFER_SIZE_88E(Adapter) + MAX_TX_REPORT_BUFFER_SIZE - MAX_SUPPORT_WOL_PATTERN_NUM(Adapter) * WKFMCAM_SIZE;
Offset = Offset / 128; /* RX page size = 128 byte */
rxff_bndy = (Offset * 128) - 1;
} else
#endif
rtw_write16(Adapter, (REG_TRXFF_BNDY + 2), rxff_bndy);
}
static void
_InitNormalChipRegPriority(
PADAPTER Adapter,
u16 beQ,
u16 bkQ,
u16 viQ,
u16 voQ,
u16 mgtQ,
u16 hiQ
)
{
u16 value16 = (rtw_read16(Adapter, REG_TRXDMA_CTRL) & 0x7);
value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) |
_TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) |
_TXDMA_MGQ_MAP(mgtQ) | _TXDMA_HIQ_MAP(hiQ);
rtw_write16(Adapter, REG_TRXDMA_CTRL, value16);
}
static void
_InitNormalChipOneOutEpPriority(
PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u16 value = 0;
switch (pHalData->OutEpQueueSel) {
case TX_SELE_HQ:
value = QUEUE_HIGH;
break;
case TX_SELE_LQ:
value = QUEUE_LOW;
break;
case TX_SELE_NQ:
value = QUEUE_NORMAL;
break;
default:
/* RT_ASSERT(FALSE,("Shall not reach here!\n")); */
break;
}
_InitNormalChipRegPriority(Adapter,
value,
value,
value,
value,
value,
value
);
}
static void
_InitNormalChipTwoOutEpPriority(
PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
u16 valueHi = 0;
u16 valueLow = 0;
switch (pHalData->OutEpQueueSel) {
case (TX_SELE_HQ | TX_SELE_LQ):
valueHi = QUEUE_HIGH;
valueLow = QUEUE_LOW;
break;
case (TX_SELE_NQ | TX_SELE_LQ):
valueHi = QUEUE_NORMAL;
valueLow = QUEUE_LOW;
break;
case (TX_SELE_HQ | TX_SELE_NQ):
valueHi = QUEUE_HIGH;
valueLow = QUEUE_NORMAL;
break;
default:
/* RT_ASSERT(FALSE,("Shall not reach here!\n")); */
break;
}
if (!pregistrypriv->wifi_spec) {
beQ = valueLow;
bkQ = valueLow;
viQ = valueHi;
voQ = valueHi;
mgtQ = valueHi;
hiQ = valueHi;
} else { /* for WMM ,CONFIG_OUT_EP_WIFI_MODE */
beQ = valueLow;
bkQ = valueHi;
viQ = valueHi;
voQ = valueLow;
mgtQ = valueHi;
hiQ = valueHi;
}
_InitNormalChipRegPriority(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
}
static void
_InitNormalChipThreeOutEpPriority(
PADAPTER Adapter
)
{
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
if (!pregistrypriv->wifi_spec) { /* typical setting */
beQ = QUEUE_LOW;
bkQ = QUEUE_LOW;
viQ = QUEUE_NORMAL;
voQ = QUEUE_HIGH;
mgtQ = QUEUE_HIGH;
hiQ = QUEUE_HIGH;
} else { /* for WMM */
beQ = QUEUE_LOW;
bkQ = QUEUE_NORMAL;
viQ = QUEUE_NORMAL;
voQ = QUEUE_HIGH;
mgtQ = QUEUE_HIGH;
hiQ = QUEUE_HIGH;
}
_InitNormalChipRegPriority(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
}
static void
_InitQueuePriority(
PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
switch (pHalData->OutEpNumber) {
case 1:
_InitNormalChipOneOutEpPriority(Adapter);
break;
case 2:
_InitNormalChipTwoOutEpPriority(Adapter);
break;
case 3:
_InitNormalChipThreeOutEpPriority(Adapter);
break;
default:
/* RT_ASSERT(FALSE,("Shall not reach here!\n")); */
break;
}
}
static void
_InitHardwareDropIncorrectBulkOut(
PADAPTER Adapter
)
{
#ifdef ENABLE_USB_DROP_INCORRECT_OUT
u32 value32 = rtw_read32(Adapter, REG_TXDMA_OFFSET_CHK);
value32 |= DROP_DATA_EN;
rtw_write32(Adapter, REG_TXDMA_OFFSET_CHK, value32);
#endif
}
static void
_InitNetworkType(
PADAPTER Adapter
)
{
u32 value32;
value32 = rtw_read32(Adapter, REG_CR);
/* TODO: use the other function to set network type */
value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AP);
rtw_write32(Adapter, REG_CR, value32);
/* RASSERT(pIoBase->rtw_read8(REG_CR + 2) == 0x2); */
}
static void
_InitDriverInfoSize(
PADAPTER Adapter,
u8 drvInfoSize
)
{
rtw_write8(Adapter, REG_RX_DRVINFO_SZ, drvInfoSize);
}
static void
_InitWMACSetting(
PADAPTER Adapter
)
{
/* u32 value32; */
/* u16 value16; */
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u32 rcr;
/* rcr = AAP | APM | AM | AB | APP_ICV | ADF | AMF | APP_FCS | HTC_LOC_CTRL | APP_MIC | APP_PHYSTS; */
/* rcr = */
/* RCR_AAP | RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYSTS; */
/* don't turn on AAP, it will allow all packets to driver */
rcr = RCR_APM | RCR_AM | RCR_AB | RCR_CBSSID_DATA | RCR_CBSSID_BCN | RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYST_RXFF;
#if (1 == RTL8188E_RX_PACKET_INCLUDE_CRC)
rcr |= ACRC32;
#endif
rtw_hal_set_hwreg(Adapter, HW_VAR_RCR, (u8 *)&rcr);
/* Accept all multicast address */
rtw_write32(Adapter, REG_MAR, 0xFFFFFFFF);
rtw_write32(Adapter, REG_MAR + 4, 0xFFFFFFFF);
/* Accept all data frames */
/* value16 = 0xFFFF; */
/* rtw_write16(Adapter, REG_RXFLTMAP2, value16); */
/* 2010.09.08 hpfan */
/* Since ADF is removed from RCR, ps-poll will not be indicate to driver, */
/* RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll. */
/* value16 = 0x400; */
/* rtw_write16(Adapter, REG_RXFLTMAP1, value16); */
/* Accept all management frames */
/* value16 = 0xFFFF; */
/* rtw_write16(Adapter, REG_RXFLTMAP0, value16); */
/* enable RX_SHIFT bits */
/* rtw_write8(Adapter, REG_TRXDMA_CTRL, rtw_read8(Adapter, REG_TRXDMA_CTRL)|BIT(1)); */
}
static void
_InitAdaptiveCtrl(
PADAPTER Adapter
)
{
u16 value16;
u32 value32;
/* Response Rate Set */
value32 = rtw_read32(Adapter, REG_RRSR);
value32 &= ~RATE_BITMAP_ALL;
value32 |= RATE_RRSR_CCK_ONLY_1M;
#ifdef RTW_DYNAMIC_RRSR
rtw_phydm_set_rrsr(Adapter, value32, TRUE);
#else
rtw_write32(Adapter, REG_RRSR, value32);
#endif
/* CF-END Threshold */
/* m_spIoBase->rtw_write8(REG_CFEND_TH, 0x1); */
/* SIFS (used in NAV) */
value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10);
rtw_write16(Adapter, REG_SPEC_SIFS, value16);
/* Retry Limit */
value16 = BIT_LRL(RL_VAL_STA) | BIT_SRL(RL_VAL_STA);
rtw_write16(Adapter, REG_RETRY_LIMIT, value16);
}
static void
_InitEDCA(
PADAPTER Adapter
)
{
/* Set Spec SIFS (used in NAV) */
rtw_write16(Adapter, REG_SPEC_SIFS, 0x100a);
rtw_write16(Adapter, REG_MAC_SPEC_SIFS, 0x100a);
/* Set SIFS for CCK */
rtw_write16(Adapter, REG_SIFS_CTX, 0x100a);
/* Set SIFS for OFDM */
rtw_write16(Adapter, REG_SIFS_TRX, 0x100a);
/* TXOP */
rtw_write32(Adapter, REG_EDCA_BE_PARAM, 0x005EA42B);
rtw_write32(Adapter, REG_EDCA_BK_PARAM, 0x0000A44F);
rtw_write32(Adapter, REG_EDCA_VI_PARAM, 0x005EA324);
rtw_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226);
}
static void
_InitBeaconMaxError(
PADAPTER Adapter,
BOOLEAN InfraMode
)
{
}
#ifdef CONFIG_RTW_LED
static void _InitHWLed(PADAPTER Adapter)
{
struct led_priv *pledpriv = adapter_to_led(Adapter);
if (pledpriv->LedStrategy != HW_LED)
return;
/* HW led control
* to do ....
* must consider cases of antenna diversity/ commbo card/solo card/mini card */
}
#endif /* CONFIG_RTW_LED */
static void
_InitRDGSetting(
PADAPTER Adapter
)
{
rtw_write8(Adapter, REG_RD_CTRL, 0xFF);
rtw_write16(Adapter, REG_RD_NAV_NXT, 0x200);
rtw_write8(Adapter, REG_RD_RESP_PKT_TH, 0x05);
}
static void
_InitRetryFunction(
PADAPTER Adapter
)
{
u8 value8;
value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL);
value8 |= EN_AMPDU_RTY_NEW;
rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);
/* Set ACK timeout */
rtw_write8(Adapter, REG_ACKTO, 0x40);
}
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingTxUpdate()
*
* Overview: Seperate TX/RX parameters update independent for TP detection and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: PADAPTER
*
* Output/Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Seperate to smaller function.
*
*---------------------------------------------------------------------------*/
static void
usb_AggSettingTxUpdate(
PADAPTER Adapter
)
{
#ifdef CONFIG_USB_TX_AGGREGATION
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
/* PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); */
u32 value32;
if (Adapter->registrypriv.wifi_spec)
pHalData->UsbTxAggMode = _FALSE;
if (pHalData->UsbTxAggMode) {
value32 = rtw_read32(Adapter, REG_TDECTRL);
value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT);
value32 |= ((pHalData->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT);
rtw_write32(Adapter, REG_TDECTRL, value32);
}
#endif
} /* usb_AggSettingTxUpdate */
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingRxUpdate()
*
* Overview: Seperate TX/RX parameters update independent for TP detection and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: PADAPTER
*
* Output/Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Seperate to smaller function.
*
*---------------------------------------------------------------------------*/
static void
usb_AggSettingRxUpdate(
PADAPTER Adapter
)
{
#ifdef CONFIG_USB_RX_AGGREGATION
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
/* PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); */
u8 valueDMA;
u8 valueUSB;
valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL);
valueUSB = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION);
switch (pHalData->rxagg_mode) {
case RX_AGG_DMA:
valueDMA |= RXDMA_AGG_EN;
valueUSB &= ~USB_AGG_EN;
break;
case RX_AGG_USB:
valueDMA &= ~RXDMA_AGG_EN;
valueUSB |= USB_AGG_EN;
break;
case RX_AGG_MIX:
valueDMA |= RXDMA_AGG_EN;
valueUSB |= USB_AGG_EN;
break;
case RX_AGG_DISABLE:
default:
valueDMA &= ~RXDMA_AGG_EN;
valueUSB &= ~USB_AGG_EN;
break;
}
rtw_write8(Adapter, REG_TRXDMA_CTRL, valueDMA);
rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, valueUSB);
switch (pHalData->rxagg_mode) {
case RX_AGG_DMA:
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, pHalData->rxagg_dma_size);
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH + 1, pHalData->rxagg_dma_timeout);
break;
case RX_AGG_USB:
rtw_write8(Adapter, REG_USB_AGG_TH, pHalData->rxagg_usb_size);
rtw_write8(Adapter, REG_USB_AGG_TO, pHalData->rxagg_usb_timeout);
break;
case RX_AGG_MIX:
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, pHalData->rxagg_dma_size);
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH + 1, pHalData->rxagg_dma_timeout & 0x1F); /* 0x280[12:8] */
rtw_write8(Adapter, REG_USB_AGG_TH, pHalData->rxagg_usb_size);
rtw_write8(Adapter, REG_USB_AGG_TO, pHalData->rxagg_usb_timeout);
break;
case RX_AGG_DISABLE:
default:
/* TODO: */
break;
}
switch (PBP_128) {
case PBP_128:
pHalData->HwRxPageSize = 128;
break;
case PBP_64:
pHalData->HwRxPageSize = 64;
break;
case PBP_256:
pHalData->HwRxPageSize = 256;
break;
case PBP_512:
pHalData->HwRxPageSize = 512;
break;
case PBP_1024:
pHalData->HwRxPageSize = 1024;
break;
default:
/* RT_ASSERT(FALSE, ("RX_PAGE_SIZE_REG_VALUE definition is incorrect!\n")); */
break;
}
#endif
} /* usb_AggSettingRxUpdate */
static void
InitUsbAggregationSetting(
PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
/* Tx aggregation setting */
usb_AggSettingTxUpdate(Adapter);
/* Rx aggregation setting */
usb_AggSettingRxUpdate(Adapter);
/* 201/12/10 MH Add for USB agg mode dynamic switch. */
pHalData->UsbRxHighSpeedMode = _FALSE;
}
void
HalRxAggr8188EUsb(
PADAPTER Adapter,
BOOLEAN Value
)
{
#if 0/* USB_RX_AGGREGATION_92C */
PMGNT_INFO pMgntInfo = &Adapter->MgntInfo;
u8 valueDMATimeout;
u8 valueDMAPageCount;
u8 valueUSBTimeout;
u8 valueUSBBlockCount;
/* selection to prevent bad TP. */
if (IS_WIRELESS_MODE_B(Adapter) || IS_WIRELESS_MODE_G(Adapter) || IS_WIRELESS_MODE_A(Adapter) || pMgntInfo->bWiFiConfg) {
/* 2010.04.27 hpfan */
/* Adjust RxAggrTimeout to close to zero disable RxAggr, suggested by designer */
/* Timeout value is calculated by 34 / (2^n) */
valueDMATimeout = 0x0f;
valueDMAPageCount = 0x01;
valueUSBTimeout = 0x0f;
valueUSBBlockCount = 0x01;
rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_PGTO, (u8 *)&valueDMATimeout);
rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_PGTH, (u8 *)&valueDMAPageCount);
rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_USBTO, (u8 *)&valueUSBTimeout);
rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_USBTH, (u8 *)&valueUSBBlockCount);
} else {
rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_USBTO, (u8 *)&pMgntInfo->RegRxAggBlockTimeout);
rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_USBTH, (u8 *)&pMgntInfo->RegRxAggBlockCount);
}
#endif
}
/*-----------------------------------------------------------------------------
* Function: USB_AggModeSwitch()
*
* Overview: When RX traffic is more than 40M, we need to adjust some parameters to increase
* RX speed by increasing batch indication size. This will decrease TCP ACK speed, we
* need to monitor the influence of FTP/network share.
* For TX mode, we are still ubder investigation.
*
* Input: PADAPTER
*
* Output: NONE
*
* Return: NONE
*
* Revised History:
* When Who Remark
* 12/10/2010 MHC Create Version 0.
*
*---------------------------------------------------------------------------*/
void
USB_AggModeSwitch(
PADAPTER Adapter
)
{
#if 0
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
/* pHalData->UsbRxHighSpeedMode = FALSE; */
/* How to measure the RX speed? We assume that when traffic is more than */
if (pMgntInfo->bRegAggDMEnable == FALSE) {
return; /* Inf not support. */
}
if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == TRUE &&
pHalData->UsbRxHighSpeedMode == FALSE) {
pHalData->UsbRxHighSpeedMode = TRUE;
} else if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == FALSE &&
pHalData->UsbRxHighSpeedMode == TRUE) {
pHalData->UsbRxHighSpeedMode = FALSE;
} else
return;
#if USB_RX_AGGREGATION_92C
if (pHalData->UsbRxHighSpeedMode == TRUE) {
/* 2010/12/10 MH The parameter is tested by SD1 engineer and SD3 channel emulator. */
/* USB mode */
#if (RT_PLATFORM == PLATFORM_LINUX)
if (pMgntInfo->LinkDetectInfo.bTxBusyTraffic) {
pHalData->RxAggBlockCount = 16;
pHalData->RxAggBlockTimeout = 7;
} else
#endif
{
pHalData->RxAggBlockCount = 40;
pHalData->RxAggBlockTimeout = 5;
}
/* Mix mode */
pHalData->RxAggPageCount = 72;
pHalData->RxAggPageTimeout = 6;
} else {
/* USB mode */
pHalData->RxAggBlockCount = pMgntInfo->RegRxAggBlockCount;
pHalData->RxAggBlockTimeout = pMgntInfo->RegRxAggBlockTimeout;
/* Mix mode */
pHalData->RxAggPageCount = pMgntInfo->RegRxAggPageCount;
pHalData->RxAggPageTimeout = pMgntInfo->RegRxAggPageTimeout;
}
if (pHalData->RxAggBlockCount > MAX_RX_AGG_BLKCNT)
pHalData->RxAggBlockCount = MAX_RX_AGG_BLKCNT;
#if (OS_WIN_FROM_VISTA(OS_VERSION)) || (RT_PLATFORM == PLATFORM_LINUX) /* do not support WINXP to prevent usbehci.sys BSOD */
if (IS_WIRELESS_MODE_N_24G(Adapter) || IS_WIRELESS_MODE_N_5G(Adapter)) {
/* */
/* 2010/12/24 MH According to V1012 QC IOT test, XP BSOD happen when running chariot test */
/* with the aggregation dynamic change!! We need to disable the function to prevent it is broken */
/* in usbehci.sys. */
/* */
usb_AggSettingRxUpdate_8188E(Adapter);
/* 2010/12/27 MH According to designer's suggstion, we can only modify Timeout value. Otheriwse */
/* there might many HW incorrect behavior, the XP BSOD at usbehci.sys may be relative to the */
/* issue. Base on the newest test, we can not enable block cnt > 30, otherwise XP usbehci.sys may */
/* BSOD. */
}
#endif
#endif
#endif
} /* USB_AggModeSwitch */
static void
_InitRFType(
PADAPTER Adapter
)
{
struct registry_priv *pregpriv = &Adapter->registrypriv;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
#if DISABLE_BB_RF
pHalData->rf_chip = RF_PSEUDO_11N;
return;
#endif
pHalData->rf_chip = RF_6052;
/* TODO: Consider that EEPROM set 92CU to 1T1R later. */
/* Force to overwrite setting according to chip version. Ignore EEPROM setting. */
/* pHalData->RF_Type = is92CU ? RF_2T2R : RF_1T1R; */
RTW_INFO("Set RF Chip ID to RF_6052 and RF type to %d.\n", pHalData->rf_type);
}
/* Set CCK and OFDM Block "ON" */
static void _BBTurnOnBlock(
PADAPTER Adapter
)
{
#if (DISABLE_BB_RF)
return;
#endif
phy_set_bb_reg(Adapter, rFPGA0_RFMOD, bCCKEn, 0x1);
phy_set_bb_reg(Adapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
}
static void
_InitAntenna_Selection(PADAPTER Adapter)
{
#ifdef CONFIG_ANTENNA_DIVERSITY
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
if (pHalData->AntDivCfg == 0)
return;
RTW_INFO("==> %s ....\n", __FUNCTION__);
rtw_write32(Adapter, REG_LEDCFG0, rtw_read32(Adapter, REG_LEDCFG0) | BIT23);
phy_set_bb_reg(Adapter, rFPGA0_XAB_RFParameter, BIT13, 0x01);
#endif
}
/*
* 2010/08/26 MH Add for selective suspend mode check.
* If Efuse 0x0e bit1 is not enabled, we can not support selective suspend for Minicard and
* slim card.
* */
#if 0
static void
HalDetectSelectiveSuspendMode(
PADAPTER Adapter
)
{
u8 tmpvalue;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(Adapter);
/* If support HW radio detect, we need to enable WOL ability, otherwise, we */
/* can not use FW to notify host the power state switch. */
EFUSE_ShadowRead(Adapter, 1, EEPROM_USB_OPTIONAL1, (u32 *)&tmpvalue);
RTW_INFO("HalDetectSelectiveSuspendMode(): SS ");
if (tmpvalue & BIT1)
RTW_INFO("Enable\n");
else {
RTW_INFO("Disable\n");
pdvobjpriv->RegUsbSS = _FALSE;
}
/* 2010/09/01 MH According to Dongle Selective Suspend INF. We can switch SS mode. */
if (pdvobjpriv->RegUsbSS && !SUPPORT_HW_RADIO_DETECT(pHalData)) {
/* PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); */
/* if (!pMgntInfo->bRegDongleSS) */
/* { */
pdvobjpriv->RegUsbSS = _FALSE;
/* } */
}
} /* HalDetectSelectiveSuspendMode */
#endif
rt_rf_power_state RfOnOffDetect(PADAPTER pAdapter)
{
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(pAdapter);
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
u8 val8;
rt_rf_power_state rfpowerstate = rf_off;
if (pwrctl->bHWPowerdown) {
val8 = rtw_read8(pAdapter, REG_HSISR);
RTW_INFO("pwrdown, 0x5c(BIT7)=%02x\n", val8);
rfpowerstate = (val8 & BIT7) ? rf_off : rf_on;
} else { /* rf on/off */
rtw_write8(pAdapter, REG_MAC_PINMUX_CFG, rtw_read8(pAdapter, REG_MAC_PINMUX_CFG) & ~(BIT3));
val8 = rtw_read8(pAdapter, REG_GPIO_IO_SEL);
RTW_INFO("GPIO_IN=%02x\n", val8);
rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;
}
return rfpowerstate;
} /* HalDetectPwrDownMode */
void _ps_open_RF(_adapter *padapter);
u32 rtl8188eu_hal_init(PADAPTER Adapter)
{
u8 value8 = 0;
u16 value16;
u8 txpktbuf_bndy;
u32 status = _SUCCESS;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(Adapter);
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
rt_rf_power_state eRfPowerStateToSet;
#ifdef CONFIG_BT_COEXIST
struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist);
#endif
systime init_start_time = rtw_get_current_time();
#ifdef DBG_HAL_INIT_PROFILING
enum HAL_INIT_STAGES {
HAL_INIT_STAGES_BEGIN = 0,
HAL_INIT_STAGES_INIT_PW_ON,
HAL_INIT_STAGES_MISC01,
HAL_INIT_STAGES_DOWNLOAD_FW,
HAL_INIT_STAGES_MAC,
HAL_INIT_STAGES_BB,
HAL_INIT_STAGES_RF,
HAL_INIT_STAGES_EFUSE_PATCH,
HAL_INIT_STAGES_INIT_LLTT,
HAL_INIT_STAGES_MISC02,
HAL_INIT_STAGES_TURN_ON_BLOCK,
HAL_INIT_STAGES_INIT_SECURITY,
HAL_INIT_STAGES_MISC11,
HAL_INIT_STAGES_INIT_HAL_DM,
/* HAL_INIT_STAGES_RF_PS, */
HAL_INIT_STAGES_IQK,
HAL_INIT_STAGES_PW_TRACK,
HAL_INIT_STAGES_LCK,
/* HAL_INIT_STAGES_MISC21, */
/* HAL_INIT_STAGES_INIT_PABIAS, */
#ifdef CONFIG_BT_COEXIST
HAL_INIT_STAGES_BT_COEXIST,
#endif
/* HAL_INIT_STAGES_ANTENNA_SEL, */
/* HAL_INIT_STAGES_MISC31, */
HAL_INIT_STAGES_END,
HAL_INIT_STAGES_NUM
};
char *hal_init_stages_str[] = {
"HAL_INIT_STAGES_BEGIN",
"HAL_INIT_STAGES_INIT_PW_ON",
"HAL_INIT_STAGES_MISC01",
"HAL_INIT_STAGES_DOWNLOAD_FW",
"HAL_INIT_STAGES_MAC",
"HAL_INIT_STAGES_BB",
"HAL_INIT_STAGES_RF",
"HAL_INIT_STAGES_EFUSE_PATCH",
"HAL_INIT_STAGES_INIT_LLTT",
"HAL_INIT_STAGES_MISC02",
"HAL_INIT_STAGES_TURN_ON_BLOCK",
"HAL_INIT_STAGES_INIT_SECURITY",
"HAL_INIT_STAGES_MISC11",
"HAL_INIT_STAGES_INIT_HAL_DM",
/* "HAL_INIT_STAGES_RF_PS", */
"HAL_INIT_STAGES_IQK",
"HAL_INIT_STAGES_PW_TRACK",
"HAL_INIT_STAGES_LCK",
/* "HAL_INIT_STAGES_MISC21", */
#ifdef CONFIG_BT_COEXIST
"HAL_INIT_STAGES_BT_COEXIST",
#endif
/* "HAL_INIT_STAGES_ANTENNA_SEL", */
/* "HAL_INIT_STAGES_MISC31", */
"HAL_INIT_STAGES_END",
};
int hal_init_profiling_i;
systime hal_init_stages_timestamp[HAL_INIT_STAGES_NUM]; /* used to record the time of each stage's starting point */
for (hal_init_profiling_i = 0; hal_init_profiling_i < HAL_INIT_STAGES_NUM; hal_init_profiling_i++)
hal_init_stages_timestamp[hal_init_profiling_i] = 0;
#define HAL_INIT_PROFILE_TAG(stage) do { hal_init_stages_timestamp[(stage)] = rtw_get_current_time(); } while (0)
#else
#define HAL_INIT_PROFILE_TAG(stage) do {} while (0)
#endif /* DBG_HAL_INIT_PROFILING */
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN);
if (pwrctrlpriv->bkeepfwalive) {
_ps_open_RF(Adapter);
if (pHalData->bIQKInitialized) {
/* PHY_IQCalibrate(padapter, _TRUE); */
/*phy_iq_calibrate_8188e(Adapter, _TRUE);*/
halrf_iqk_trigger(&pHalData->odmpriv, _TRUE);
} else {
/* PHY_IQCalibrate(padapter, _FALSE); */
/*phy_iq_calibrate_8188e(Adapter, _FALSE);*/
halrf_iqk_trigger(&pHalData->odmpriv, _FALSE);
pHalData->bIQKInitialized = _TRUE;
}
/* dm_check_txpowertracking(padapter);
* phy_lc_calibrate(padapter); */
odm_txpowertracking_check(&pHalData->odmpriv);
/*phy_lc_calibrate_8188e(&pHalData->odmpriv);*/
halrf_lck_trigger(&pHalData->odmpriv);
goto exit;
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
status = rtw_hal_power_on(Adapter);
if (status == _FAIL) {
goto exit;
}
/* Set RF type for BB/RF configuration */
_InitRFType(Adapter);/* ->_ReadRFType() */
/* Save target channel */
/* <Roger_Notes> Current Channel will be updated again later. */
pHalData->current_channel = 6;/* default set to 6 */
if (pwrctrlpriv->reg_rfoff == _TRUE)
pwrctrlpriv->rf_pwrstate = rf_off;
/* 2010/08/09 MH We need to check if we need to turnon or off RF after detecting */
/* HW GPIO pin. Before PHY_RFConfig8192C. */
/* HalDetectPwrDownMode(Adapter); */
/* 2010/08/26 MH If Efuse does not support sective suspend then disable the function. */
/*HalDetectSelectiveSuspendMode(Adapter);*/
if (!pregistrypriv->wifi_spec)
txpktbuf_bndy = TX_PAGE_BOUNDARY_88E(Adapter);
else {
/* for WMM */
txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_88E(Adapter);
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01);
_InitQueueReservedPage(Adapter);
_InitQueuePriority(Adapter);
_InitPageBoundary(Adapter);
_InitTransferPageSize(Adapter);
#ifdef CONFIG_IOL_IOREG_CFG
_InitTxBufferBoundary(Adapter, 0);
#endif
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW);
if (Adapter->registrypriv.mp_mode == 0) {
status = rtl8188e_FirmwareDownload(Adapter, _FALSE);
if (status != _SUCCESS) {
RTW_INFO("%s: Download Firmware failed!!\n", __FUNCTION__);
pHalData->bFWReady = _FALSE;
pHalData->fw_ractrl = _FALSE;
return status;
} else {
pHalData->bFWReady = _TRUE;
#ifdef CONFIG_SFW_SUPPORTED
pHalData->fw_ractrl = IS_VENDOR_8188E_I_CUT_SERIES(Adapter) ? _TRUE : _FALSE;
#else
pHalData->fw_ractrl = _FALSE;
#endif
}
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC);
#if (HAL_MAC_ENABLE == 1)
status = PHY_MACConfig8188E(Adapter);
if (status == _FAIL) {
RTW_INFO(" ### Failed to init MAC ......\n ");
goto exit;
}
#endif
/* */
/* d. Initialize BB related configurations. */
/* */
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB);
#if (HAL_BB_ENABLE == 1)
status = PHY_BBConfig8188E(Adapter);
if (status == _FAIL) {
RTW_INFO(" ### Failed to init BB ......\n ");
goto exit;
}
#endif
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF);
#if (HAL_RF_ENABLE == 1)
status = PHY_RFConfig8188E(Adapter);
if (status == _FAIL) {
RTW_INFO(" ### Failed to init RF ......\n ");
goto exit;
}
#endif
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_EFUSE_PATCH);
#if defined(CONFIG_IOL_EFUSE_PATCH)
status = rtl8188e_iol_efuse_patch(Adapter);
if (status == _FAIL) {
RTW_INFO("%s rtl8188e_iol_efuse_patch failed\n", __FUNCTION__);
goto exit;
}
#endif
_InitTxBufferBoundary(Adapter, txpktbuf_bndy);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT);
status = InitLLTTable(Adapter, txpktbuf_bndy);
if (status == _FAIL) {
goto exit;
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02);
/* Get Rx PHY status in order to report RSSI and others. */
_InitDriverInfoSize(Adapter, DRVINFO_SZ);
_InitInterrupt(Adapter);
_InitNetworkType(Adapter);/* set msr */
_InitWMACSetting(Adapter);
_InitAdaptiveCtrl(Adapter);
_InitEDCA(Adapter);
_InitRetryFunction(Adapter);
InitUsbAggregationSetting(Adapter);
InitBeaconParameters_8188e(Adapter);
_InitBeaconMaxError(Adapter, _TRUE);
/* */
/* Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */
/* Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. */
/* */
/* Enable MACTXEN/MACRXEN block */
value16 = rtw_read16(Adapter, REG_CR);
value16 |= (MACTXEN | MACRXEN);
rtw_write8(Adapter, REG_CR, value16);
_InitHardwareDropIncorrectBulkOut(Adapter);
if (pHalData->bRDGEnable)
_InitRDGSetting(Adapter);
/* Enable TX Report & Tx Report Timer */
value8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
rtw_write8(Adapter, REG_TX_RPT_CTRL, (value8 | BIT1 | BIT0));
#if (RATE_ADAPTIVE_SUPPORT == 1)
if (!pHalData->fw_ractrl) {
/* Set MAX RPT MACID */
rtw_write8(Adapter, REG_TX_RPT_CTRL + 1, 2); /* FOR sta mode ,0: bc/mc ,1:AP */
/* Tx RPT Timer. Unit: 32us */
rtw_write16(Adapter, REG_TX_RPT_TIME, 0xCdf0);
} else
#endif
{
/* disable tx rpt */
rtw_write8(Adapter, REG_TX_RPT_CTRL + 1, 0); /* FOR sta mode ,0: bc/mc ,1:AP */
}
#if 0
if (pHTInfo->bRDGEnable)
_InitRDGSetting_8188E(Adapter);
#endif
#ifdef CONFIG_TX_EARLY_MODE
if (pHalData->bEarlyModeEnable) {
value8 = rtw_read8(Adapter, REG_EARLY_MODE_CONTROL);
#if RTL8188E_EARLY_MODE_PKT_NUM_10 == 1
value8 = value8 | 0x1f;
#else
value8 = value8 | 0xf;
#endif
rtw_write8(Adapter, REG_EARLY_MODE_CONTROL, value8);
rtw_write8(Adapter, REG_EARLY_MODE_CONTROL + 3, 0x80);
value8 = rtw_read8(Adapter, REG_TCR + 1);
value8 = value8 | 0x40;
rtw_write8(Adapter, REG_TCR + 1, value8);
} else
#endif
{
rtw_write8(Adapter, REG_EARLY_MODE_CONTROL, 0);
}
rtw_write32(Adapter, REG_MACID_NO_LINK_0, 0xFFFFFFFF);
rtw_write32(Adapter, REG_MACID_NO_LINK_1, 0xFFFFFFFF);
#ifdef CONFIG_RTW_LED
_InitHWLed(Adapter);
#endif /* CONFIG_RTW_LED */
/* */
/* Joseph Note: Keep RfRegChnlVal for later use. */
/* */
pHalData->RfRegChnlVal[0] = phy_query_rf_reg(Adapter, 0, RF_CHNLBW, bRFRegOffsetMask);
pHalData->RfRegChnlVal[1] = phy_query_rf_reg(Adapter, 1, RF_CHNLBW, bRFRegOffsetMask);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK);
_BBTurnOnBlock(Adapter);
/* NicIFSetMacAddress(padapter, padapter->PermanentAddress); */
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY);
invalidate_cam_all(Adapter);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11);
/* 2010/12/17 MH We need to set TX power according to EFUSE content at first. */
rtw_hal_set_tx_power_level(Adapter, pHalData->current_channel);
_InitAntenna_Selection(Adapter);
/* */
/* Disable BAR, suggested by Scott */
/* 2010.04.09 add by hpfan */
/* */
rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff);
/* HW SEQ CTRL */
/* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */
rtw_write8(Adapter, REG_HWSEQ_CTRL, 0xFF);
PHY_SetRFEReg_8188E(Adapter);
if (pregistrypriv->wifi_spec) {
rtw_write16(Adapter, REG_FAST_EDCA_CTRL , 0);
/* Nav limit , suggest by scott */
rtw_write8(Adapter, REG_NAV_UPPER, 0x0);
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM);
rtl8188e_InitHalDm(Adapter);
#if (MP_DRIVER == 1)
if (Adapter->registrypriv.mp_mode == 1) {
Adapter->mppriv.channel = pHalData->current_channel;
MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel);
} else
#endif /* #if (MP_DRIVER == 1) */
{
/* */
/* 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status */
/* and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not */
/* call init_adapter. May cause some problem?? */
/* */
/* Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed */
/* in MgntActSet_RF_State() after wake up, because the value of pHalData->eRFPowerState */
/* is the same as eRfOff, we should change it to eRfOn after we config RF parameters. */
/* Added by tynli. 2010.03.30. */
pwrctrlpriv->rf_pwrstate = rf_on;
if (!pHalData->fw_ractrl) {
/* enable Tx report. */
rtw_write8(Adapter, REG_FWHW_TXQ_CTRL + 1, 0x0F);
/* tynli_test_tx_report. */
rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0);
}
/* Suggested by SD1 pisa. Added by tynli. 2011.10.21. */
rtw_write8(Adapter, REG_EARLY_MODE_CONTROL + 3, 0x01); /* Pretx_en, for WEP/TKIP SEC */
/* enable tx DMA to drop the redundate data of packet */
rtw_write16(Adapter, REG_TXDMA_OFFSET_CHK, (rtw_read16(Adapter, REG_TXDMA_OFFSET_CHK) | DROP_DATA_EN));
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK);
/* 2010/08/26 MH Merge from 8192CE. */
if (pwrctrlpriv->rf_pwrstate == rf_on) {
pHalData->neediqk_24g = _TRUE;
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK);
odm_txpowertracking_check(&pHalData->odmpriv);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);
/*phy_lc_calibrate_8188e(&pHalData->odmpriv);*/
halrf_lck_trigger(&pHalData->odmpriv);
}
}
rtw_write8(Adapter, REG_USB_HRPWM, 0);
#ifdef CONFIG_XMIT_ACK
/* ack for xmit mgmt frames. */
rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL) | BIT(12));
#endif /* CONFIG_XMIT_ACK */
exit:
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END);
RTW_INFO("%s in %dms\n", __FUNCTION__, rtw_get_passing_time_ms(init_start_time));
#ifdef DBG_HAL_INIT_PROFILING
hal_init_stages_timestamp[HAL_INIT_STAGES_END] = rtw_get_current_time();
for (hal_init_profiling_i = 0; hal_init_profiling_i < HAL_INIT_STAGES_NUM - 1; hal_init_profiling_i++) {
RTW_INFO("DBG_HAL_INIT_PROFILING: %35s, %lu, %5lu, %5u\n"
, hal_init_stages_str[hal_init_profiling_i]
, hal_init_stages_timestamp[hal_init_profiling_i]
, (hal_init_stages_timestamp[hal_init_profiling_i + 1] - hal_init_stages_timestamp[hal_init_profiling_i])
, rtw_get_time_interval_ms(hal_init_stages_timestamp[hal_init_profiling_i], hal_init_stages_timestamp[hal_init_profiling_i + 1])
);
}
#endif
return status;
}
void _ps_open_RF(_adapter *padapter)
{
/* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */
/* phy_SsPwrSwitch92CU(padapter, rf_on, 1); */
}
void _ps_close_RF(_adapter *padapter)
{
/* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */
/* phy_SsPwrSwitch92CU(padapter, rf_off, 1); */
}
void
hal_poweroff_8188eu(
PADAPTER Adapter
)
{
u8 val8;
u16 val16;
u32 val32;
u8 bMacPwrCtrlOn = _FALSE;
rtw_hal_get_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
if (bMacPwrCtrlOn == _FALSE)
return ;
/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
val8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
rtw_write8(Adapter, REG_TX_RPT_CTRL, val8 & (~BIT1));
/* stop rx */
rtw_write8(Adapter, REG_CR, 0x0);
/* Run LPS WL RFOFF flow */
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_LPS_ENTER_FLOW);
/* 2. 0x1F[7:0] = 0 */ /* turn off RF */
/* rtw_write8(Adapter, REG_RF_CTRL, 0x00); */
val8 = rtw_read8(Adapter, REG_MCUFWDL);
if ((val8 & RAM_DL_SEL) && GET_HAL_DATA(Adapter)->bFWReady) { /* 8051 RAM code */
/* _8051Reset88E(padapter); */
/* Reset MCU 0x2[10]=0. */
val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN + 1);
val8 &= ~BIT(2); /* 0x2[10], FEN_CPUEN */
rtw_write8(Adapter, REG_SYS_FUNC_EN + 1, val8);
}
/* val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN+1); */
/* val8 &= ~BIT(2); */ /* 0x2[10], FEN_CPUEN */
/* rtw_write8(Adapter, REG_SYS_FUNC_EN+1, val8); */
/* MCUFWDL 0x80[1:0]=0 */
/* reset MCU ready status */
rtw_write8(Adapter, REG_MCUFWDL, 0);
/* YJ,add,111212 */
/* Disable 32k */
val8 = rtw_read8(Adapter, REG_32K_CTRL);
rtw_write8(Adapter, REG_32K_CTRL, val8 & (~BIT0));
/* Card disable power action flow */
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_DISABLE_FLOW);
/* Reset MCU IO Wrapper */
val8 = rtw_read8(Adapter, REG_RSV_CTRL + 1);
rtw_write8(Adapter, REG_RSV_CTRL + 1, (val8 & (~BIT3)));
val8 = rtw_read8(Adapter, REG_RSV_CTRL + 1);
rtw_write8(Adapter, REG_RSV_CTRL + 1, val8 | BIT3);
#if 0
/* 7. RSV_CTRL 0x1C[7:0] = 0x0E */ /* lock ISO/CLK/Power control register */
rtw_write8(Adapter, REG_RSV_CTRL, 0x0e);
#endif
#if 1
/* YJ,test add, 111207. For Power Consumption. */
val8 = rtw_read8(Adapter, GPIO_IN);
rtw_write8(Adapter, GPIO_OUT, val8);
rtw_write8(Adapter, GPIO_IO_SEL, 0xFF);/* Reg0x46 */
val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL);
/* rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4)|val8); */
rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8 << 4));
val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL + 1);
rtw_write8(Adapter, REG_GPIO_IO_SEL + 1, val8 | 0x0F); /* Reg0x43 */
rtw_write32(Adapter, REG_BB_PAD_CTRL, 0x00080808);/* set LNA ,TRSW,EX_PA Pin to output mode */
#endif
GET_HAL_DATA(Adapter)->bFWReady = _FALSE;
bMacPwrCtrlOn = _FALSE;
rtw_hal_set_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
}
static void rtl8188eu_hw_power_down(_adapter *padapter)
{
/* 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c. */
/* Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. */
/* Enable register area 0x0-0xc. */
rtw_write8(padapter, REG_RSV_CTRL, 0x0);
rtw_write16(padapter, REG_APS_FSMCO, 0x8812);
}
u32 rtl8188eu_hal_deinit(PADAPTER Adapter)
{
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter);
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
RTW_INFO("==> %s\n", __FUNCTION__);
#ifdef CONFIG_SUPPORT_USB_INT
rtw_write32(Adapter, REG_HIMR_88E, IMR_DISABLED_88E);
rtw_write32(Adapter, REG_HIMRE_88E, IMR_DISABLED_88E);
#endif
#ifdef SUPPORT_HW_RFOFF_DETECTED
RTW_INFO("bkeepfwalive(%x)\n", pwrctl->bkeepfwalive);
if (pwrctl->bkeepfwalive) {
_ps_close_RF(Adapter);
if ((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown))
rtl8188eu_hw_power_down(Adapter);
} else
#endif
{
if (rtw_is_hw_init_completed(Adapter)) {
rtw_hal_power_off(Adapter);
if ((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown))
rtl8188eu_hw_power_down(Adapter);
}
}
return _SUCCESS;
}
unsigned int rtl8188eu_inirp_init(PADAPTER Adapter)
{
u8 i;
struct recv_buf *precvbuf;
uint status;
struct dvobj_priv *pdev = adapter_to_dvobj(Adapter);
struct intf_hdl *pintfhdl = &Adapter->iopriv.intf;
struct recv_priv *precvpriv = &(Adapter->recvpriv);
u32(*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u32(*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr);
#endif
_read_port = pintfhdl->io_ops._read_port;
status = _SUCCESS;
precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR;
/* issue Rx irp to receive data */
precvbuf = (struct recv_buf *)precvpriv->precv_buf;
for (i = 0; i < NR_RECVBUFF; i++) {
if (_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE) {
status = _FAIL;
goto exit;
}
precvbuf++;
precvpriv->free_recv_buf_queue_cnt--;
}
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
if (pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX] != 0x05) {
status = _FAIL;
RTW_INFO("%s =>Warning !! Have not USB Int-IN pipe, RtIntInPipe(%d)!!!\n", __func__, pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX]);
goto exit;
}
_read_interrupt = pintfhdl->io_ops._read_interrupt;
if (_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE) {
status = _FAIL;
}
#endif
exit:
return status;
}
unsigned int rtl8188eu_inirp_deinit(PADAPTER Adapter)
{
rtw_read_port_cancel(Adapter);
return _SUCCESS;
}
/* -------------------------------------------------------------------------
*
* EEPROM Power index mapping
*
* ------------------------------------------------------------------------- */
/* -------------------------------------------------------------------
*
* EEPROM/EFUSE Content Parsing
*
* ------------------------------------------------------------------- */
static void
_ReadLEDSetting(
PADAPTER Adapter,
u8 *PROMContent,
BOOLEAN AutoloadFail
)
{
#ifdef CONFIG_RTW_LED
struct led_priv *pledpriv = adapter_to_led(Adapter);
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
#ifdef CONFIG_RTW_SW_LED
pledpriv->bRegUseLed = _TRUE;
switch (pHalData->CustomerID) {
default:
pledpriv->LedStrategy = SW_LED_MODE1;
break;
}
pHalData->bLedOpenDrain = _TRUE;/* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */
#else /* HW LED */
pledpriv->LedStrategy = HW_LED;
#endif /* CONFIG_RTW_SW_LED */
#endif
}
static void
Hal_EfuseParsePIDVID_8188EU(
PADAPTER pAdapter,
u8 *hwinfo,
BOOLEAN AutoLoadFail
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
if (!AutoLoadFail) {
/* VID, PID */
pHalData->EEPROMVID = ReadLE2Byte(&hwinfo[EEPROM_VID_88EU]);
pHalData->EEPROMPID = ReadLE2Byte(&hwinfo[EEPROM_PID_88EU]);
/* Customer ID, 0x00 and 0xff are reserved for Realtek. */
pHalData->EEPROMCustomerID = *(u8 *)&hwinfo[EEPROM_CustomID_88E];
pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
} else {
pHalData->EEPROMVID = EEPROM_Default_VID;
pHalData->EEPROMPID = EEPROM_Default_PID;
/* Customer ID, 0x00 and 0xff are reserved for Realtek. */
pHalData->EEPROMCustomerID = EEPROM_Default_CustomerID;
pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
}
RTW_INFO("VID = 0x%04X, PID = 0x%04X\n", pHalData->EEPROMVID, pHalData->EEPROMPID);
RTW_INFO("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n", pHalData->EEPROMCustomerID, pHalData->EEPROMSubCustomerID);
}
static void
Hal_CustomizeByCustomerID_8188EU(
PADAPTER padapter
)
{
#if 0
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
/* For customized behavior. */
if ((pHalData->EEPROMVID == 0x103C) && (pHalData->EEPROMVID == 0x1629)) /* HP Lite-On for RTL8188CUS Slim Combo. */
pHalData->CustomerID = RT_CID_819x_HP;
/* Decide CustomerID according to VID/DID or EEPROM */
switch (pHalData->EEPROMCustomerID) {
case EEPROM_CID_DEFAULT:
if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3308))
pHalData->CustomerID = RT_CID_DLINK;
else if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3309))
pHalData->CustomerID = RT_CID_DLINK;
else if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330a))
pHalData->CustomerID = RT_CID_DLINK;
break;
case EEPROM_CID_WHQL:
padapter->bInHctTest = TRUE;
pMgntInfo->bSupportTurboMode = FALSE;
pMgntInfo->bAutoTurboBy8186 = FALSE;
pMgntInfo->PowerSaveControl.bInactivePs = FALSE;
pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE;
pMgntInfo->PowerSaveControl.bLeisurePs = FALSE;
pMgntInfo->PowerSaveControl.bLeisurePsModeBackup = FALSE;
pMgntInfo->keepAliveLevel = 0;
padapter->bUnloadDriverwhenS3S4 = FALSE;
break;
default:
pHalData->CustomerID = RT_CID_DEFAULT;
break;
}
hal_CustomizedBehavior_8723U(padapter);
#endif
}
static void
readAdapterInfo_8188EU(
PADAPTER padapter
)
{
PHAL_DATA_TYPE pHalData = GET_HAL_DATA(padapter);
/* parse the eeprom/efuse content */
Hal_EfuseParseIDCode88E(padapter, pHalData->efuse_eeprom_data);
Hal_EfuseParsePIDVID_8188EU(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
hal_config_macaddr(padapter, pHalData->bautoload_fail_flag);
Hal_ReadPowerSavingMode88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadTxPowerInfo88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_EfuseParseEEPROMVer88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
rtl8188e_EfuseParseChnlPlan(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_EfuseParseXtal_8188E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_EfuseParseCustomerID88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadAntennaDiversity88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_EfuseParseBoardType88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadThermalMeter_88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadPAType_8188E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadAmplifierType_8188E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
Hal_ReadRFEType_8188E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
#ifdef CONFIG_RF_POWER_TRIM
Hal_ReadRFGainOffset(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
#endif /*CONFIG_RF_POWER_TRIM*/
/* */
/* The following part initialize some vars by PG info. */
/* */
#if defined(CONFIG_WOWLAN) && defined(CONFIG_SDIO_HCI)
Hal_DetectWoWMode(padapter);
#endif /* CONFIG_WOWLAN && CONFIG_SDIO_HCI */
Hal_CustomizeByCustomerID_8188EU(padapter);
_ReadLEDSetting(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag);
}
static void _ReadPROMContent(
PADAPTER Adapter
)
{
PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
u8 eeValue;
/* check system boot selection */
eeValue = rtw_read8(Adapter, REG_9346CR);
pHalData->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? _TRUE : _FALSE;
pHalData->bautoload_fail_flag = (eeValue & EEPROM_EN) ? _FALSE : _TRUE;
RTW_INFO("Boot from %s, Autoload %s !\n", (pHalData->EepromOrEfuse ? "EEPROM" : "EFUSE"),
(pHalData->bautoload_fail_flag ? "Fail" : "OK"));
/* pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE; */
Hal_InitPGData88E(Adapter);
readAdapterInfo_8188EU(Adapter);
}
static void
_ReadRFType(
PADAPTER Adapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
#if DISABLE_BB_RF
pHalData->rf_chip = RF_PSEUDO_11N;
#else
pHalData->rf_chip = RF_6052;
#endif
}
static u8 ReadAdapterInfo8188EU(PADAPTER Adapter)
{
/* Read EEPROM size before call any EEPROM function */
Adapter->EepromAddressSize = GetEEPROMSize8188E(Adapter);
_ReadRFType(Adapter);/* rf_chip->_InitRFType() */
_ReadPROMContent(Adapter);
return _SUCCESS;
}
void UpdateInterruptMask8188EU(PADAPTER padapter, u8 bHIMR0 , u32 AddMSR, u32 RemoveMSR)
{
HAL_DATA_TYPE *pHalData;
u32 *himr;
pHalData = GET_HAL_DATA(padapter);
if (bHIMR0)
himr = &(pHalData->IntrMask[0]);
else
himr = &(pHalData->IntrMask[1]);
if (AddMSR)
*himr |= AddMSR;
if (RemoveMSR)
*himr &= (~RemoveMSR);
if (bHIMR0)
rtw_write32(padapter, REG_HIMR_88E, *himr);
else
rtw_write32(padapter, REG_HIMRE_88E, *himr);
}
u8 SetHwReg8188EU(PADAPTER Adapter, u8 variable, u8 *val)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 ret = _SUCCESS;
switch (variable) {
case HW_VAR_RXDMA_AGG_PG_TH:
#ifdef CONFIG_USB_RX_AGGREGATION
{
/* threshold == 1 , Disable Rx-agg when AP is B/G mode or wifi_spec=1 to prevent bad TP. */
u8 threshold = *((u8 *)val);
if (threshold == 0) {
switch (pHalData->rxagg_mode) {
case RX_AGG_DMA:
threshold = (pHalData->rxagg_dma_size & 0x0F);
break;
case RX_AGG_USB:
case RX_AGG_MIX:
threshold = (pHalData->rxagg_usb_size & 0x0F);
break;
case RX_AGG_DISABLE:
default:
break;
}
}
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold);
#ifdef CONFIG_80211N_HT
{
/* 2014-07-24 Fix WIFI Logo -5.2.4/5.2.9 - DT3 low TP issue */
/* Adjust RxAggrTimeout to close to zero disable RxAggr for RxAgg-USB mode, suggested by designer */
/* Timeout value is calculated by 34 / (2^n) */
struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
struct ht_priv *phtpriv = &pmlmepriv->htpriv;
if (pHalData->rxagg_mode == RX_AGG_USB) {
/* BG mode || (wifi_spec=1 && BG mode Testbed) */
if ((threshold == 1) && (phtpriv->ht_option == _FALSE))
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH + 1, 0);
else
rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH + 1, pHalData->rxagg_usb_timeout);
}
}
#endif/* CONFIG_80211N_HT */
}
#endif/* CONFIG_USB_RX_AGGREGATION */
break;
case HW_VAR_SET_RPWM:
#ifdef CONFIG_LPS_LCLK
{
u8 ps_state = *((u8 *)val);
/* rpwm value only use BIT0(clock bit) ,BIT6(Ack bit), and BIT7(Toggle bit) for 88e. */
/* BIT0 value - 1: 32k, 0:40MHz. */
/* BIT6 value - 1: report cpwm value after success set, 0:do not report. */
/* BIT7 value - Toggle bit change. */
/* modify by Thomas. 2012/4/2. */
ps_state = ps_state & 0xC1;
/* RTW_INFO("##### Change RPWM value to = %x for switch clk #####\n",ps_state); */
rtw_write8(Adapter, REG_USB_HRPWM, ps_state);
}
#endif
break;
default:
ret = SetHwReg8188E(Adapter, variable, val);
break;
}
return ret;
}
void GetHwReg8188EU(PADAPTER Adapter, u8 variable, u8 *val)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
switch (variable) {
default:
GetHwReg8188E(Adapter, variable, val);
break;
}
}
/*
* Description:
* Query setting of specified variable.
* */
u8
GetHalDefVar8188EUsb(
PADAPTER Adapter,
HAL_DEF_VARIABLE eVariable,
void *pValue
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 bResult = _SUCCESS;
switch (eVariable) {
case HW_VAR_MAX_RX_AMPDU_FACTOR:
*((u32 *)pValue) = MAX_AMPDU_FACTOR_64K;
break;
case HAL_DEF_TX_LDPC:
case HAL_DEF_RX_LDPC:
*((u8 *)pValue) = _FALSE;
break;
case HAL_DEF_TX_STBC:
*((u8 *)pValue) = 0;
break;
case HAL_DEF_RX_STBC:
*((u8 *)pValue) = 1;
break;
default:
bResult = GetHalDefVar8188E(Adapter, eVariable, pValue);
break;
}
return bResult;
}
/*
* Description:
* Change default setting of specified variable.
* */
u8
SetHalDefVar8188EUsb(
PADAPTER Adapter,
HAL_DEF_VARIABLE eVariable,
void *pValue
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
u8 bResult = _SUCCESS;
switch (eVariable) {
default:
bResult = SetHalDefVar(Adapter, eVariable, pValue);
break;
}
return bResult;
}
#if 0
u32 _update_92cu_basic_rate(_adapter *padapter, unsigned int mask)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
#ifdef CONFIG_BT_COEXIST
struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist);
#endif
unsigned int BrateCfg = 0;
#ifdef CONFIG_BT_COEXIST
if ((pbtpriv->BT_Coexist) && (pbtpriv->BT_CoexistType == BT_CSR_BC4))
BrateCfg = mask & 0x151;
else
#endif
{
/* if(pHalData->version_id != VERSION_TEST_CHIP_88C) */
BrateCfg = mask & 0x15F;
/* else //for 88CU 46PING setting, Disable CCK 2M, 5.5M, Others must tuning */
/* BrateCfg = mask & 0x159; */
}
BrateCfg |= 0x01; /* default enable 1M ACK rate */
return BrateCfg;
}
#endif
static void rtl8188eu_init_default_value(_adapter *padapter)
{
PHAL_DATA_TYPE pHalData;
struct pwrctrl_priv *pwrctrlpriv;
u8 i;
pHalData = GET_HAL_DATA(padapter);
pwrctrlpriv = adapter_to_pwrctl(padapter);
/* init default value */
pHalData->fw_ractrl = _FALSE;
if (!pwrctrlpriv->bkeepfwalive)
pHalData->LastHMEBoxNum = 0;
/* init dm default value */
pHalData->bIQKInitialized = _FALSE;
pHalData->EfuseHal.fakeEfuseBank = 0;
pHalData->EfuseHal.fakeEfuseUsedBytes = 0;
_rtw_memset(pHalData->EfuseHal.fakeEfuseContent, 0xFF, EFUSE_MAX_HW_SIZE);
_rtw_memset(pHalData->EfuseHal.fakeEfuseInitMap, 0xFF, EFUSE_MAX_MAP_LEN);
_rtw_memset(pHalData->EfuseHal.fakeEfuseModifiedMap, 0xFF, EFUSE_MAX_MAP_LEN);
}
static u8 rtl8188eu_ps_func(PADAPTER Adapter, HAL_INTF_PS_FUNC efunc_id, u8 *val)
{
u8 bResult = _TRUE;
switch (efunc_id) {
#if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED)
case HAL_USB_SELECT_SUSPEND: {
u8 bfwpoll = *((u8 *)val);
/* rtl8188e_set_FwSelectSuspend_cmd(Adapter,bfwpoll ,500); */ /* note fw to support hw power down ping detect */
}
break;
#endif /* CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED */
default:
break;
}
return bResult;
}
void rtl8188eu_set_hal_ops(_adapter *padapter)
{
struct hal_ops *pHalFunc = &padapter->hal_func;
pHalFunc->hal_power_on = _InitPowerOn_8188EU;
pHalFunc->hal_power_off = hal_poweroff_8188eu;
pHalFunc->hal_init = &rtl8188eu_hal_init;
pHalFunc->hal_deinit = &rtl8188eu_hal_deinit;
pHalFunc->inirp_init = &rtl8188eu_inirp_init;
pHalFunc->inirp_deinit = &rtl8188eu_inirp_deinit;
pHalFunc->init_xmit_priv = &rtl8188eu_init_xmit_priv;
pHalFunc->free_xmit_priv = &rtl8188eu_free_xmit_priv;
pHalFunc->init_recv_priv = &rtl8188eu_init_recv_priv;
pHalFunc->free_recv_priv = &rtl8188eu_free_recv_priv;
#ifdef CONFIG_RTW_SW_LED
pHalFunc->InitSwLeds = &rtl8188eu_InitSwLeds;
pHalFunc->DeInitSwLeds = &rtl8188eu_DeInitSwLeds;
#endif/* CONFIG_RTW_SW_LED */
pHalFunc->init_default_value = &rtl8188eu_init_default_value;
pHalFunc->intf_chip_configure = &rtl8188eu_interface_configure;
pHalFunc->read_adapter_info = &ReadAdapterInfo8188EU;
pHalFunc->set_hw_reg_handler = &SetHwReg8188EU;
pHalFunc->GetHwRegHandler = &GetHwReg8188EU;
pHalFunc->get_hal_def_var_handler = &GetHalDefVar8188EUsb;
pHalFunc->SetHalDefVarHandler = &SetHalDefVar8188EUsb;
pHalFunc->SetBeaconRelatedRegistersHandler = &SetBeaconRelatedRegisters8188E;
pHalFunc->hal_xmit = &rtl8188eu_hal_xmit;
pHalFunc->mgnt_xmit = &rtl8188eu_mgnt_xmit;
pHalFunc->hal_xmitframe_enqueue = &rtl8188eu_hal_xmitframe_enqueue;
#ifdef CONFIG_HOSTAPD_MLME
pHalFunc->hostap_mgnt_xmit_entry = &rtl8188eu_hostap_mgnt_xmit_entry;
#endif
pHalFunc->interface_ps_func = &rtl8188eu_ps_func;
#ifdef CONFIG_XMIT_THREAD_MODE
pHalFunc->xmit_thread_handler = &rtl8188eu_xmit_buf_handler;
#endif
#ifdef CONFIG_SUPPORT_USB_INT
pHalFunc->interrupt_handler = interrupt_handler_8188eu;
#endif
rtl8188e_set_hal_ops(pHalFunc);
}
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags