Orange Pi5 kernel

hw_mac = MAC_ADDR
hw_mac_2 = MAC2ADDR

############################################################
# MAC address
#
# Priority 1. From wifi.cfg [ hw_mac & hw_mac_2 ]
#
# Priority 2. From e-fuse[ON/OFF switch by wifi.cfg]
#
# Priority 3. From insert module parameter
#
# Priority 4. From external file path
#   path only support some special charater "_" ":" "/" "." "-"
#
# Priority 5. Default[Software mode]
#
#   0. => 00:33:33:33:33:33
#   1. => Always random
#   2. => First random and write to file[Default path mac_output_path]
#
############################################################
#ignore_efuse_mac = 1
#mac_address_path = /xxxx/xxxx
#mac_address_mode = 0
#mac_output_path = /data/wifimac

##################################################
# Firmware setting
# Priority.1 insmod parameter "cfgfirmwarepath"
# Priority.2 firmware_path
# Priority.3 default firmware
##################################################
#firmware_path = /lib/firmware/

##################################################
# Hardware setting
#
#volt regulator(DCDC-0 LDO-1)
#
##################################################
xtal_clock = 26
volt_regulator = 1

##################################################
# Default channel after wifi on
# value range: [1 ~ 14]
##################################################
def_chan = 6

# Hardware Capability Settings:
##################################################
hw_cap_ht = on
hw_cap_gf = off
hw_cap_2ghz = on
hw_cap_5ghz = off
hw_cap_security = on
hw_cap_sgi_20 = on
hw_cap_sgi_40 = off
hw_cap_ap = on
hw_cap_p2p = on
hw_cap_ampdu_rx = on
hw_cap_ampdu_tx = on
use_wpa2_only = 1

##################################################
# TX power level setting [0-14]
# The larger the number the smaller the TX power
# 0 - The maximum power
# 1 level = -0.5db
##################################################
wifi_tx_gain_level_b = 6
wifi_tx_gain_level_gn = 4