/******************************************************************************
*
* Copyright(c) 2015 - 2016 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
/***** temporarily flag *******/
#define CONFIG_SINGLE_IMG
/* #define CONFIG_DISABLE_ODM */
/***** temporarily flag *******/
/*
* Public General Config
*/
#define AUTOCONF_INCLUDED
#define DRV_NAME "rtl8822be"
#define CONFIG_PCI_HCI
#define CONFIG_PCIE_HCI
#define PLATFORM_LINUX
/*
* Wi-Fi Functions Config
*/
#define CONFIG_80211N_HT
#define CONFIG_RECV_REORDERING_CTRL
#define CONFIG_80211AC_VHT
#define CONFIG_IEEE80211_BAND_5GHZ
/*#define CONFIG_IOCTL_CFG80211*/
#ifdef CONFIG_IOCTL_CFG80211
/*#define RTW_USE_CFG80211_STA_EVENT*/ /* Indecate new sta asoc through cfg80211_new_sta */
#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
/*#define CONFIG_DEBUG_CFG80211*/
/*#define CONFIG_DRV_ISSUE_PROV_REQ*/ /* IOT FOR S2 */
#define CONFIG_SET_SCAN_DENY_TIMER
#endif
#define TX_AMSDU
/*
* Internal General Config
*/
/*#define CONFIG_PWRCTRL*/
/*#define CONFIG_H2CLBK*/
#define CONFIG_TRX_BD_ARCH /* PCI only */
#define USING_RX_TAG
/*#define CONFIG_NAPI*/
/*#define CONFIG_GRO*/
#define CONFIG_C2H_PACKET_EN /* necessary for 8822B */
#define CONFIG_EMBEDDED_FWIMG
/*#define CONFIG_FILE_FWIMG*/
/*#define CONFIG_XMIT_ACK*/
#ifdef CONFIG_XMIT_ACK
#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
#endif
/*#define CONFIG_TCP_CSUM_OFFLOAD_RX*/
/*#define CONFIG_DRVEXT_MODULE*/
/*#define CONFIG_DISABLE_MCS13TO15 1*/ /* Disable MSC13-15 rates for more stable TX throughput with some 5G APs */
#define BUF_DESC_ARCH /* if defined, hardware follows Rx buffer descriptor architecture */
#define CONFIG_DFS 1
/*#define CONFIG_IPS*/
#ifdef CONFIG_IPS
/*#define CONFIG_IPS_LEVEL_2*/ /* enable this to set default IPS mode to IPS_LEVEL_2 */
#endif
/*#define SUPPORT_HW_RFOFF_DETECTED*/
#define CONFIG_HIGH_CHAN_SUPER_CALIBRATION
#define CONFIG_LPS
#if defined(CONFIG_LPS)
/*#define CONFIG_LPS_LCLK*/ /* 32K */
#endif
#ifdef CONFIG_LPS_LCLK
#define CONFIG_XMIT_THREAD_MODE
#endif
/*#define CONFIG_ANTENNA_DIVERSITY*/
/*#define CONFIG_CONCURRENT_MODE*/
#ifdef CONFIG_CONCURRENT_MODE
/*#define CONFIG_HWPORT_SWAP*/ /* Port0->Sec, Port1->Pri */
#define CONFIG_RUNTIME_PORT_SWITCH
/*#define DBG_RUNTIME_PORT_SWITCH*/
#define CONFIG_SCAN_BACKOP
/*#define CONFIG_ATMEL_RC_PATCH*/
/*#define CONFIG_TSF_RESET_OFFLOAD*/ /* For 2 PORT TSF SYNC. */
#else /* NAPI doesn't support CONCURRENT mode currently*/
#define CONFIG_NAPI
#define CONFIG_GRO
#endif
#define CONFIG_AP_MODE
#ifdef CONFIG_AP_MODE
/*#define CONFIG_INTERRUPT_BASED_TXBCN*/ /* Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs */
#if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN)
#undef CONFIG_INTERRUPT_BASED_TXBCN
#endif
#ifdef CONFIG_INTERRUPT_BASED_TXBCN
/*#define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT*/
#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
#endif
#define CONFIG_NATIVEAP_MLME
#ifndef CONFIG_NATIVEAP_MLME
#define CONFIG_HOSTAPD_MLME
#endif
#define CONFIG_FIND_BEST_CHANNEL
/*#define CONFIG_AUTO_AP_MODE*/
#endif
#define CONFIG_P2P
#ifdef CONFIG_P2P
/* The CONFIG_WFD is for supporting the Wi-Fi display */
#define CONFIG_WFD
#define CONFIG_P2P_REMOVE_GROUP_INFO
/*#define CONFIG_DBG_P2P*/
#define CONFIG_P2P_PS
/*#define CONFIG_P2P_IPS*/
#define CONFIG_P2P_OP_CHK_SOCIAL_CH
#define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */
#define CONFIG_P2P_INVITE_IOT
#endif
/* Added by Kurt 20110511 */
#ifdef CONFIG_TDLS
#define CONFIG_TDLS_DRIVER_SETUP
#if 0
#ifndef CONFIG_WFD
#define CONFIG_WFD
#endif
#define CONFIG_TDLS_AUTOSETUP
#endif
#define CONFIG_TDLS_AUTOCHECKALIVE
#define CONFIG_TDLS_CH_SW /* Enable "CONFIG_TDLS_CH_SW" by default, however limit it to only work in wifi logo test mode but not in normal mode currently */
#endif
#define CONFIG_SKB_COPY /* for amsdu */
/*#define CONFIG_LED*/
#ifdef CONFIG_LED
/*#define CONFIG_SW_LED*/
#ifdef CONFIG_SW_LED
/*#define CONFIG_LED_HANDLED_BY_CMD_THREAD*/
#endif
#endif /* CONFIG_LED */
#define CONFIG_GLOBAL_UI_PID
#define CONFIG_LAYER2_ROAMING
#define CONFIG_LAYER2_ROAMING_RESUME
/*#define CONFIG_ADAPTOR_INFO_CACHING_FILE*/ /* now just applied on 8192cu only, should make it general...*/
/*#define CONFIG_RESUME_IN_WORKQUEUE*/
/*#define CONFIG_SET_SCAN_DENY_TIMER*/
#define CONFIG_LONG_DELAY_ISSUE
#define CONFIG_NEW_SIGNAL_STAT_PROCESS
/*#define CONFIG_SIGNAL_DISPLAY_DBM*/ /* display RX signal with dbm */
#ifdef CONFIG_SIGNAL_DISPLAY_DBM
/*#define CONFIG_BACKGROUND_NOISE_MONITOR*/
#endif
#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
#define CONFIG_TX_MCAST2UNI /* Support IP multicast->unicast*/
/*#define CONFIG_CHECK_AC_LIFETIME 1*/ /* Check packet lifetime of 4 ACs. */
/*
* Software feature Related Config
*/
#define RTW_HALMAC /* Use HALMAC architecture, necessary for 8822B */
/* #define CONFIG_RF4CE_COEXIST */ /* ZigBee coexist support */
/*
* Interface Related Config
*/
/*
* HAL Related Config
*/
#define RTL8192E_RX_PACKET_INCLUDE_CRC 0
#define CONFIG_RX_PACKET_APPEND_FCS
#define SUPPORTED_BLOCK_IO
#define RTL8188E_FW_DOWNLOAD_ENABLE
/*#define CONFIG_ONLY_ONE_OUT_EP_TO_LOW 0*/
#define CONFIG_OUT_EP_WIFI_MODE 0
#define ENABLE_USB_DROP_INCORRECT_OUT
#define DISABLE_BB_RF 0
#ifdef CONFIG_GPIO_WAKEUP
#ifndef WAKEUP_GPIO_IDX
#define WAKEUP_GPIO_IDX 14
#endif
#endif
/*#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0*/
#ifdef CONFIG_MP_INCLUDED
#define MP_DRIVER 1
#define CONFIG_MP_IWPRIV_SUPPORT 1
#else
#define MP_DRIVER 0
#endif
/* Use cmd frame to issue beacon. Use a fixed buffer for beacon. */
#define CONFIG_BCN_ICF
/*
* Platform Related Config
*/
#ifdef CONFIG_BT_COEXIST
/* for ODM and outsrc BT-Coex */
#ifndef CONFIG_LPS
#define CONFIG_LPS /* download reserved page to FW */
#endif
#endif /* !CONFIG_BT_COEXIST */
#ifdef CONFIG_USB_TX_AGGREGATION
/*#define CONFIG_TX_EARLY_MODE*/
#endif
#ifdef CONFIG_TX_EARLY_MODE
#define RTL8192E_EARLY_MODE_PKT_NUM_10 0
#endif
/* Try to handle the Beacon error found in some types of TP-LINK APs */
#define CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR
#define CONFIG_80211D
#define CONFIG_BEAMFORMING
#ifdef CONFIG_BEAMFORMING
#define BEAMFORMING_SUPPORT 0 /* Use driver self mechanism, not phydm */
#define RTW_BEAMFORMING_VERSION_2
#endif /* CONFIG_BEAMFORMING */
/*
* Debug Related Config
*/
#define DBG 1
/*#define CONFIG_DEBUG_RTL871X*/ /* RT_TRACE, RT_PRINT_DATA, _func_enter_, _func_exit_ */
#define CONFIG_PROC_DEBUG
#define CONFIG_DBG_COUNTER
#define DBG_CONFIG_ERROR_DETECT
/*
#define DBG_CONFIG_ERROR_DETECT_INT
#define DBG_CONFIG_ERROR_RESET
#define DBG_IO
#define DBG_DELAY_OS
#define DBG_MEM_ALLOC
#define DBG_IOCTL
#define DBG_TX
#define DBG_XMIT_BUF
#define DBG_XMIT_BUF_EXT
#define DBG_TX_DROP_FRAME
#define DBG_RX_DROP_FRAME
#define DBG_RX_SEQ
#define DBG_RX_SIGNAL_DISPLAY_PROCESSING
#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"
*/
#define DBG_RX_SIGNAL_DISPLAY_RAW_DATA
#if 0
#define DBG_NOISE_MONITOR
#define DBG_TX_POWER_IDX
#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
#define DBG_ROAMING_TEST
#define DBG_HAL_INIT_PROFILING
#define DBG_MEMORY_LEAK 1
/* TX use 1 urb */
#define CONFIG_SINGLE_XMIT_BUF
/* RX use 1 urb */
#define CONFIG_SINGLE_RECV_BUF
#endif
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags