/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __HALDMOUTSRC_H__
#define __HALDMOUTSRC_H__
//============================================================
// include files
//============================================================
#include "phydm_pre_define.h"
#include "phydm_dig.h"
#include "phydm_edcaturbocheck.h"
#include "phydm_pathdiv.h"
#include "phydm_antdiv.h"
#include "phydm_antdect.h"
#include "phydm_dynamicbbpowersaving.h"
#include "phydm_rainfo.h"
#include "phydm_dynamictxpower.h"
#include "phydm_cfotracking.h"
#include "phydm_acs.h"
#include "phydm_adaptivity.h"
#if (RTL8814A_SUPPORT == 1)
#include "rtl8814a/phydm_iqk_8814a.h"
#endif
#if (DM_ODM_SUPPORT_TYPE & (ODM_AP))
#include "halphyrf_ap.h"
#include "phydm_powertracking_ap.h"
#endif
#if (DM_ODM_SUPPORT_TYPE & (ODM_CE))
#include "phydm_noisemonitor.h"
#include "halphyrf_ce.h"
#include "phydm_powertracking_ce.h"
#endif
#if(DM_ODM_SUPPORT_TYPE & (ODM_WIN))
#include "phydm_beamforming.h"
#include "phydm_rxhp.h"
#include "halphyrf_win.h"
#include "phydm_powertracking_win.h"
#endif
//============================================================
// Definition
//============================================================
//
// 2011/09/22 MH Define all team supprt ability.
//
//
// 2011/09/22 MH Define for all teams. Please Define the constan in your precomp header.
//
//#define DM_ODM_SUPPORT_AP 0
//#define DM_ODM_SUPPORT_ADSL 0
//#define DM_ODM_SUPPORT_CE 0
//#define DM_ODM_SUPPORT_MP 1
//
// 2011/09/28 MH Define ODM SW team support flag.
//
//For SW AntDiv, PathDiv, 8192C AntDiv joint use
#define TP_MODE 0
#define RSSI_MODE 1
#define TRAFFIC_LOW 0
#define TRAFFIC_HIGH 1
#define TRAFFIC_UltraLOW 2
#define NONE 0
/*NBI API------------------------------------*/
#define NBI_ENABLE 1
#define NBI_DISABLE 2
#define NBI_TABLE_SIZE_128 27
#define NBI_TABLE_SIZE_256 59
#define NUM_START_CH_80M 7
#define NUM_START_CH_40M 14
#define CH_OFFSET_40M 2
#define CH_OFFSET_80M 6
/*------------------------------------------------*/
#define SET_SUCCESS 1
#define SET_ERROR 2
#define SET_NO_NEED 3
#define FFT_128_TYPE 1
#define FFT_256_TYPE 2
#define PHYDM_WATCH_DOG_PERIOD 2
//8723A High Power IGI Setting
#define DM_DIG_HIGH_PWR_IGI_LOWER_BOUND 0x22
#define DM_DIG_Gmode_HIGH_PWR_IGI_LOWER_BOUND 0x28
#define DM_DIG_HIGH_PWR_THRESHOLD 0x3a
#define DM_DIG_LOW_PWR_THRESHOLD 0x14
//============================================================
// structure and define
//============================================================
//
// 2011/09/20 MH Add for AP/ADSLpseudo DM structuer requirement.
// We need to remove to other position???
//
#if(DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_WIN))
typedef struct rtl8192cd_priv {
u1Byte temp;
}rtl8192cd_priv, *prtl8192cd_priv;
#endif
#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
typedef struct _ADAPTER{
u1Byte temp;
#ifdef AP_BUILD_WORKAROUND
HAL_DATA_TYPE* temp2;
prtl8192cd_priv priv;
#endif
}ADAPTER, *PADAPTER;
#endif
#if (DM_ODM_SUPPORT_TYPE == ODM_AP)
typedef struct _WLAN_STA{
u1Byte temp;
} WLAN_STA, *PRT_WLAN_STA;
#endif
typedef struct _Dynamic_Primary_CCA{
u1Byte PriCCA_flag;
u1Byte intf_flag;
u1Byte intf_type;
u1Byte DupRTS_flag;
u1Byte Monitor_flag;
u1Byte CH_offset;
u1Byte MF_state;
}Pri_CCA_T, *pPri_CCA_T;
#if (DM_ODM_SUPPORT_TYPE & ODM_AP)
#ifdef ADSL_AP_BUILD_WORKAROUND
#define MAX_TOLERANCE 5
#define IQK_DELAY_TIME 1 //ms
#endif
#if 0//defined in 8192cd.h
//
// Indicate different AP vendor for IOT issue.
//
typedef enum _HT_IOT_PEER
{
HT_IOT_PEER_UNKNOWN = 0,
HT_IOT_PEER_REALTEK = 1,
HT_IOT_PEER_REALTEK_92SE = 2,
HT_IOT_PEER_BROADCOM = 3,
HT_IOT_PEER_RALINK = 4,
HT_IOT_PEER_ATHEROS = 5,
HT_IOT_PEER_CISCO = 6,
HT_IOT_PEER_MERU = 7,
HT_IOT_PEER_MARVELL = 8,
HT_IOT_PEER_REALTEK_SOFTAP = 9,// peer is RealTek SOFT_AP, by Bohn, 2009.12.17
HT_IOT_PEER_SELF_SOFTAP = 10, // Self is SoftAP
HT_IOT_PEER_AIRGO = 11,
HT_IOT_PEER_INTEL = 12,
HT_IOT_PEER_RTK_APCLIENT = 13,
HT_IOT_PEER_REALTEK_81XX = 14,
HT_IOT_PEER_REALTEK_WOW = 15,
HT_IOT_PEER_MAX = 16
}HT_IOT_PEER_E, *PHTIOT_PEER_E;
#endif
#endif//#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
#define DM_Type_ByFW 0
#define DM_Type_ByDriver 1
//
// Declare for common info
//
#define IQK_THRESHOLD 8
#define DPK_THRESHOLD 4
#if (DM_ODM_SUPPORT_TYPE & (ODM_AP))
__PACK typedef struct _ODM_Phy_Status_Info_
{
u1Byte RxPWDBAll;
u1Byte SignalQuality; /* in 0-100 index. */
u1Byte RxMIMOSignalStrength[4]; /* in 0~100 index */
s1Byte RxMIMOSignalQuality[4]; /* EVM */
s1Byte RxSNR[4]; /* per-path's SNR */
#if (RTL8822B_SUPPORT == 1)
u1Byte RxCount; /* RX path counter---*/
#endif
u1Byte BandWidth;
} __WLAN_ATTRIB_PACK__ ODM_PHY_INFO_T, *PODM_PHY_INFO_T;
typedef struct _ODM_Phy_Status_Info_Append_
{
u1Byte MAC_CRC32;
}ODM_PHY_INFO_Append_T,*PODM_PHY_INFO_Append_T;
#else
typedef struct _ODM_Phy_Status_Info_
{
//
// Be care, if you want to add any element please insert between
// RxPWDBAll & SignalStrength.
//
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN))
u4Byte RxPWDBAll;
#else
u1Byte RxPWDBAll;
#endif
u1Byte SignalQuality; /* in 0-100 index. */
s1Byte RxMIMOSignalQuality[4]; /* per-path's EVM */
u1Byte RxMIMOEVMdbm[4]; /* per-path's EVM dbm */
u1Byte RxMIMOSignalStrength[4]; /* in 0~100 index */
s2Byte Cfo_short[4]; /* per-path's Cfo_short */
s2Byte Cfo_tail[4]; /* per-path's Cfo_tail */
s1Byte RxPower; /* in dBm Translate from PWdB */
s1Byte RecvSignalPower; /* Real power in dBm for this packet, no beautification and aggregation. Keep this raw info to be used for the other procedures. */
u1Byte BTRxRSSIPercentage;
u1Byte SignalStrength; /* in 0-100 index. */
s1Byte RxPwr[4]; /* per-path's pwdb */
s1Byte RxSNR[4]; /* per-path's SNR */
#if (RTL8822B_SUPPORT == 1)
u1Byte RxCount:2; /* RX path counter---*/
u1Byte BandWidth:2;
u1Byte rxsc:4; /* sub-channel---*/
#else
u1Byte BandWidth;
#endif
u1Byte btCoexPwrAdjust;
#if (RTL8822B_SUPPORT == 1)
u1Byte channel; /* channel number---*/
BOOLEAN bMuPacket; /* is MU packet or not---*/
BOOLEAN bBeamformed; /* BF packet---*/
#endif
}ODM_PHY_INFO_T,*PODM_PHY_INFO_T;
#endif
typedef struct _ODM_Per_Pkt_Info_
{
//u1Byte Rate;
u1Byte DataRate;
u1Byte StationID;
BOOLEAN bPacketMatchBSSID;
BOOLEAN bPacketToSelf;
BOOLEAN bPacketBeacon;
BOOLEAN bToSelf;
}ODM_PACKET_INFO_T,*PODM_PACKET_INFO_T;
typedef struct _ODM_Phy_Dbg_Info_
{
//ODM Write,debug info
s1Byte RxSNRdB[4];
u4Byte NumQryPhyStatus;
u4Byte NumQryPhyStatusCCK;
u4Byte NumQryPhyStatusOFDM;
#if (RTL8822B_SUPPORT == 1)
u4Byte NumQryMuPkt;
u4Byte NumQryBfPkt;
#endif
u1Byte NumQryBeaconPkt;
//Others
s4Byte RxEVM[4];
}ODM_PHY_DBG_INFO_T;
typedef struct _ODM_Mac_Status_Info_
{
u1Byte test;
}ODM_MAC_INFO;
//
// 2011/20/20 MH For MP driver RT_WLAN_STA = STA_INFO_T
// Please declare below ODM relative info in your STA info structure.
//
#if 1
typedef struct _ODM_STA_INFO{
// Driver Write
BOOLEAN bUsed; // record the sta status link or not?
//u1Byte WirelessMode; //
u1Byte IOTPeer; // Enum value. HT_IOT_PEER_E
// ODM Write
//1 PHY_STATUS_INFO
u1Byte RSSI_Path[4]; //
u1Byte RSSI_Ave;
u1Byte RXEVM[4];
u1Byte RXSNR[4];
// ODM Write
//1 TX_INFO (may changed by IC)
//TX_INFO_T pTxInfo; // Define in IC folder. Move lower layer.
#if 0
u1Byte ANTSEL_A; //in Jagar: 4bit; others: 2bit
u1Byte ANTSEL_B; //in Jagar: 4bit; others: 2bit
u1Byte ANTSEL_C; //only in Jagar: 4bit
u1Byte ANTSEL_D; //only in Jagar: 4bit
u1Byte TX_ANTL; //not in Jagar: 2bit
u1Byte TX_ANT_HT; //not in Jagar: 2bit
u1Byte TX_ANT_CCK; //not in Jagar: 2bit
u1Byte TXAGC_A; //not in Jagar: 4bit
u1Byte TXAGC_B; //not in Jagar: 4bit
u1Byte TXPWR_OFFSET; //only in Jagar: 3bit
u1Byte TX_ANT; //only in Jagar: 4bit for TX_ANTL/TX_ANTHT/TX_ANT_CCK
#endif
//
// Please use compile flag to disabe the strcutrue for other IC except 88E.
// Move To lower layer.
//
// ODM Write Wilson will handle this part(said by Luke.Lee)
//TX_RPT_T pTxRpt; // Define in IC folder. Move lower layer.
#if 0
//1 For 88E RA (don't redefine the naming)
u1Byte rate_id;
u1Byte rate_SGI;
u1Byte rssi_sta_ra;
u1Byte SGI_enable;
u1Byte Decision_rate;
u1Byte Pre_rate;
u1Byte Active;
// Driver write Wilson handle.
//1 TX_RPT (don't redefine the naming)
u2Byte RTY[4]; // ???
u2Byte TOTAL; // ???
u2Byte DROP; // ???
//
// Please use compile flag to disabe the strcutrue for other IC except 88E.
//
#endif
}ODM_STA_INFO_T, *PODM_STA_INFO_T;
#endif
//
// 2011/10/20 MH Define Common info enum for all team.
//
typedef enum _ODM_Common_Info_Definition
{
//-------------REMOVED CASE-----------//
//ODM_CMNINFO_CCK_HP,
//ODM_CMNINFO_RFPATH_ENABLE, // Define as ODM write???
//ODM_CMNINFO_BT_COEXIST, // ODM_BT_COEXIST_E
//ODM_CMNINFO_OP_MODE, // ODM_OPERATION_MODE_E
//-------------REMOVED CASE-----------//
//
// Fixed value:
//
//-----------HOOK BEFORE REG INIT-----------//
ODM_CMNINFO_PLATFORM = 0,
ODM_CMNINFO_ABILITY, // ODM_ABILITY_E
ODM_CMNINFO_INTERFACE, // ODM_INTERFACE_E
ODM_CMNINFO_MP_TEST_CHIP,
ODM_CMNINFO_IC_TYPE, // ODM_IC_TYPE_E
ODM_CMNINFO_CUT_VER, // ODM_CUT_VERSION_E
ODM_CMNINFO_FAB_VER, // ODM_FAB_E
ODM_CMNINFO_RF_TYPE, // ODM_RF_PATH_E or ODM_RF_TYPE_E?
ODM_CMNINFO_RFE_TYPE,
ODM_CMNINFO_BOARD_TYPE, // ODM_BOARD_TYPE_E
ODM_CMNINFO_PACKAGE_TYPE,
ODM_CMNINFO_EXT_LNA, // TRUE
ODM_CMNINFO_5G_EXT_LNA,
ODM_CMNINFO_EXT_PA,
ODM_CMNINFO_5G_EXT_PA,
ODM_CMNINFO_GPA,
ODM_CMNINFO_APA,
ODM_CMNINFO_GLNA,
ODM_CMNINFO_ALNA,
ODM_CMNINFO_EXT_TRSW,
ODM_CMNINFO_EXT_LNA_GAIN,
ODM_CMNINFO_PATCH_ID, //CUSTOMER ID
ODM_CMNINFO_BINHCT_TEST,
ODM_CMNINFO_BWIFI_TEST,
ODM_CMNINFO_SMART_CONCURRENT,
ODM_CMNINFO_CONFIG_BB_RF,
ODM_CMNINFO_DOMAIN_CODE_2G,
ODM_CMNINFO_DOMAIN_CODE_5G,
ODM_CMNINFO_IQKFWOFFLOAD,
//-----------HOOK BEFORE REG INIT-----------//
//
// Dynamic value:
//
//--------- POINTER REFERENCE-----------//
ODM_CMNINFO_MAC_PHY_MODE, // ODM_MAC_PHY_MODE_E
ODM_CMNINFO_TX_UNI,
ODM_CMNINFO_RX_UNI,
ODM_CMNINFO_WM_MODE, // ODM_WIRELESS_MODE_E
ODM_CMNINFO_BAND, // ODM_BAND_TYPE_E
ODM_CMNINFO_SEC_CHNL_OFFSET, // ODM_SEC_CHNL_OFFSET_E
ODM_CMNINFO_SEC_MODE, // ODM_SECURITY_E
ODM_CMNINFO_BW, // ODM_BW_E
ODM_CMNINFO_CHNL,
ODM_CMNINFO_FORCED_RATE,
ODM_CMNINFO_DMSP_GET_VALUE,
ODM_CMNINFO_BUDDY_ADAPTOR,
ODM_CMNINFO_DMSP_IS_MASTER,
ODM_CMNINFO_SCAN,
ODM_CMNINFO_POWER_SAVING,
ODM_CMNINFO_ONE_PATH_CCA, // ODM_CCA_PATH_E
ODM_CMNINFO_DRV_STOP,
ODM_CMNINFO_PNP_IN,
ODM_CMNINFO_INIT_ON,
ODM_CMNINFO_ANT_TEST,
ODM_CMNINFO_NET_CLOSED,
//ODM_CMNINFO_RTSTA_AID, // For win driver only?
ODM_CMNINFO_FORCED_IGI_LB,
ODM_CMNINFO_P2P_LINK,
ODM_CMNINFO_FCS_MODE,
ODM_CMNINFO_IS1ANTENNA,
ODM_CMNINFO_RFDEFAULTPATH,
//--------- POINTER REFERENCE-----------//
//------------CALL BY VALUE-------------//
ODM_CMNINFO_WIFI_DIRECT,
ODM_CMNINFO_WIFI_DISPLAY,
ODM_CMNINFO_LINK_IN_PROGRESS,
ODM_CMNINFO_LINK,
ODM_CMNINFO_STATION_STATE,
ODM_CMNINFO_RSSI_MIN,
ODM_CMNINFO_DBG_COMP, // u8Byte
ODM_CMNINFO_DBG_LEVEL, // u4Byte
ODM_CMNINFO_RA_THRESHOLD_HIGH, // u1Byte
ODM_CMNINFO_RA_THRESHOLD_LOW, // u1Byte
ODM_CMNINFO_RF_ANTENNA_TYPE, // u1Byte
ODM_CMNINFO_BT_ENABLED,
ODM_CMNINFO_BT_HS_CONNECT_PROCESS,
ODM_CMNINFO_BT_HS_RSSI,
ODM_CMNINFO_BT_OPERATION,
ODM_CMNINFO_BT_LIMITED_DIG, //Need to Limited Dig or not
ODM_CMNINFO_BT_DIG,
ODM_CMNINFO_BT_BUSY, //Check Bt is using or not//neil
ODM_CMNINFO_BT_DISABLE_EDCA,
#if(DM_ODM_SUPPORT_TYPE & ODM_AP) // for repeater mode add by YuChen 2014.06.23
#ifdef UNIVERSAL_REPEATER
ODM_CMNINFO_VXD_LINK,
#endif
#endif
ODM_CMNINFO_AP_TOTAL_NUM,
//------------CALL BY VALUE-------------//
//
// Dynamic ptr array hook itms.
//
ODM_CMNINFO_STA_STATUS,
ODM_CMNINFO_PHY_STATUS,
ODM_CMNINFO_MAC_STATUS,
ODM_CMNINFO_MAX,
}ODM_CMNINFO_E;
//
// 2011/10/20 MH Define ODM support ability. ODM_CMNINFO_ABILITY
//
typedef enum _ODM_Support_Ability_Definition
{
//
// BB ODM section BIT 0-19
//
ODM_BB_DIG = BIT0,
ODM_BB_RA_MASK = BIT1,
ODM_BB_DYNAMIC_TXPWR = BIT2,
ODM_BB_FA_CNT = BIT3,
ODM_BB_RSSI_MONITOR = BIT4,
ODM_BB_CCK_PD = BIT5,
ODM_BB_ANT_DIV = BIT6,
ODM_BB_PWR_SAVE = BIT7,
ODM_BB_PWR_TRAIN = BIT8,
ODM_BB_RATE_ADAPTIVE = BIT9,
ODM_BB_PATH_DIV = BIT10,
ODM_BB_PSD = BIT11,
ODM_BB_RXHP = BIT12,
ODM_BB_ADAPTIVITY = BIT13,
ODM_BB_CFO_TRACKING = BIT14,
ODM_BB_NHM_CNT = BIT15,
ODM_BB_PRIMARY_CCA = BIT16,
ODM_BB_TXBF = BIT17,
//
// MAC DM section BIT 20-23
//
ODM_MAC_EDCA_TURBO = BIT20,
ODM_MAC_EARLY_MODE = BIT21,
//
// RF ODM section BIT 24-31
//
ODM_RF_TX_PWR_TRACK = BIT24,
ODM_RF_RX_GAIN_TRACK = BIT25,
ODM_RF_CALIBRATION = BIT26,
}ODM_ABILITY_E;
//Move some non-DM enum,define, struc. form phydm.h to phydm_types.h by Dino
// ODM_CMNINFO_ONE_PATH_CCA
typedef enum tag_CCA_Path
{
ODM_CCA_2R = 0,
ODM_CCA_1R_A = 1,
ODM_CCA_1R_B = 2,
}ODM_CCA_PATH_E;
//move RAInfo to Phydm_RaInfo.h
//Remove struct PATHDIV_PARA to odm_PathDiv.h
//Remove struct to odm_PowerTracking.h by YuChen
//
// ODM Dynamic common info value definition
//
//Move AntDiv form phydm.h to Phydm_AntDiv.h by Dino
//move PathDiv to Phydm_PathDiv.h
typedef enum _BASEBAND_CONFIG_PHY_REG_PG_VALUE_TYPE{
PHY_REG_PG_RELATIVE_VALUE = 0,
PHY_REG_PG_EXACT_VALUE = 1
} PHY_REG_PG_TYPE;
//
// 2011/09/22 MH Copy from SD4 defined structure. We use to support PHY DM integration.
//
#if(DM_ODM_SUPPORT_TYPE & ODM_WIN)
#if (RT_PLATFORM != PLATFORM_LINUX)
typedef
#endif
struct DM_Out_Source_Dynamic_Mechanism_Structure
#else// for AP,ADSL,CE Team
typedef struct DM_Out_Source_Dynamic_Mechanism_Structure
#endif
{
//RT_TIMER FastAntTrainingTimer;
//
// Add for different team use temporarily
//
PADAPTER Adapter; // For CE/NIC team
prtl8192cd_priv priv; // For AP/ADSL team
// WHen you use Adapter or priv pointer, you must make sure the pointer is ready.
BOOLEAN odm_ready;
#if(DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_WIN))
rtl8192cd_priv fake_priv;
#endif
#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
// ADSL_AP_BUILD_WORKAROUND
ADAPTER fake_adapter;
#endif
PHY_REG_PG_TYPE PhyRegPgValueType;
u1Byte PhyRegPgVersion;
u8Byte DebugComponents;
u4Byte DebugLevel;
u4Byte NumQryPhyStatusAll; //CCK + OFDM
u4Byte LastNumQryPhyStatusAll;
u4Byte RxPWDBAve;
BOOLEAN MPDIG_2G; //off MPDIG
u1Byte Times_2G;
//------ ODM HANDLE, DRIVER NEEDS NOT TO HOOK------//
BOOLEAN bCckHighPower;
u1Byte RFPathRxEnable; // ODM_CMNINFO_RFPATH_ENABLE
u1Byte ControlChannel;
//------ ODM HANDLE, DRIVER NEEDS NOT TO HOOK------//
//--------REMOVED COMMON INFO----------//
//u1Byte PseudoMacPhyMode;
//BOOLEAN *BTCoexist;
//BOOLEAN PseudoBtCoexist;
//u1Byte OPMode;
//BOOLEAN bAPMode;
//BOOLEAN bClientMode;
//BOOLEAN bAdHocMode;
//BOOLEAN bSlaveOfDMSP;
//--------REMOVED COMMON INFO----------//
//1 COMMON INFORMATION
//
// Init Value
//
//-----------HOOK BEFORE REG INIT-----------//
BOOLEAN NoisyDecision;
u4Byte NoisyDecision_Smooth;
// ODM Platform info AP/ADSL/CE/MP = 1/2/3/4
u1Byte SupportPlatform;
// ODM Support Ability DIG/RATR/TX_PWR_TRACK/ ¡K¡K = 1/2/3/¡K
u4Byte SupportAbility;
// ODM PCIE/USB/SDIO = 1/2/3
u1Byte SupportInterface;
// ODM composite or independent. Bit oriented/ 92C+92D+ .... or any other type = 1/2/3/...
u4Byte SupportICType;
// Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/...
u1Byte CutVersion;
// Fab Version TSMC/UMC = 0/1
u1Byte FabVersion;
// RF Type 4T4R/3T3R/2T2R/1T2R/1T1R/...
u1Byte RFType;
u1Byte RFEType;
// Board Type Normal/HighPower/MiniCard/SLIM/Combo/... = 0/1/2/3/4/...
u1Byte BoardType;
u1Byte PackageType;
u1Byte TypeGLNA;
u1Byte TypeGPA;
u1Byte TypeALNA;
u1Byte TypeAPA;
// with external LNA NO/Yes = 0/1
u1Byte ExtLNA; // 2G
u1Byte ExtLNA5G; //5G
// with external PA NO/Yes = 0/1
u1Byte ExtPA; // 2G
u1Byte ExtPA5G; //5G
// with external TRSW NO/Yes = 0/1
u1Byte ExtTRSW;
u1Byte ExtLNAGain; // 2G
u1Byte PatchID; //Customer ID
BOOLEAN bInHctTest;
BOOLEAN bWIFITest;
BOOLEAN bDualMacSmartConcurrent;
u4Byte BK_SupportAbility;
u1Byte AntDivType;
BOOLEAN ConfigBBRF;
u1Byte odm_Regulation2_4G;
u1Byte odm_Regulation5G;
u1Byte IQKFWOffload;
u8 is_nbi_enable;
//-----------HOOK BEFORE REG INIT-----------//
//
// Dynamic Value
//
//--------- POINTER REFERENCE-----------//
u1Byte u1Byte_temp;
BOOLEAN BOOLEAN_temp;
PADAPTER PADAPTER_temp;
// MAC PHY Mode SMSP/DMSP/DMDP = 0/1/2
u1Byte *pMacPhyMode;
//TX Unicast byte count
u8Byte *pNumTxBytesUnicast;
//RX Unicast byte count
u8Byte *pNumRxBytesUnicast;
// Wireless mode B/G/A/N = BIT0/BIT1/BIT2/BIT3
u1Byte *pWirelessMode; //ODM_WIRELESS_MODE_E
// Frequence band 2.4G/5G = 0/1
u1Byte *pBandType;
// Secondary channel offset don't_care/below/above = 0/1/2
u1Byte *pSecChOffset;
// Security mode Open/WEP/AES/TKIP = 0/1/2/3
u1Byte *pSecurity;
// BW info 20M/40M/80M = 0/1/2
u1Byte *pBandWidth;
// Central channel location Ch1/Ch2/....
u1Byte *pChannel; //central channel number
BOOLEAN DPK_Done;
// Common info for 92D DMSP
BOOLEAN *pbGetValueFromOtherMac;
PADAPTER *pBuddyAdapter;
BOOLEAN *pbMasterOfDMSP; //MAC0: master, MAC1: slave
// Common info for Status
BOOLEAN *pbScanInProcess;
BOOLEAN *pbPowerSaving;
// CCA Path 2-path/path-A/path-B = 0/1/2; using ODM_CCA_PATH_E.
u1Byte *pOnePathCCA;
//pMgntInfo->AntennaTest
u1Byte *pAntennaTest;
BOOLEAN *pbNet_closed;
//u1Byte *pAidMap;
u1Byte *pu1ForcedIgiLb;
BOOLEAN *pIsFcsModeEnable;
/*--------- For 8723B IQK-----------*/
BOOLEAN *pIs1Antenna;
u1Byte *pRFDefaultPath;
// 0:S1, 1:S0
//--------- POINTER REFERENCE-----------//
pu2Byte pForcedDataRate;
//------------CALL BY VALUE-------------//
BOOLEAN bLinkInProcess;
BOOLEAN bWIFI_Direct;
BOOLEAN bWIFI_Display;
BOOLEAN bLinked;
BOOLEAN bsta_state;
#if(DM_ODM_SUPPORT_TYPE & ODM_AP) // for repeater mode add by YuChen 2014.06.23
#ifdef UNIVERSAL_REPEATER
BOOLEAN VXD_bLinked;
#endif
#endif // for repeater mode add by YuChen 2014.06.23
u1Byte RSSI_Min;
u1Byte InterfaceIndex; /*Add for 92D dual MAC: 0--Mac0 1--Mac1*/
BOOLEAN bIsMPChip;
BOOLEAN bOneEntryOnly;
BOOLEAN mp_mode;
u4Byte OneEntry_MACID;
u1Byte pre_number_linked_client;
u1Byte number_linked_client;
u1Byte pre_number_active_client;
u1Byte number_active_client;
// Common info for BTDM
BOOLEAN bBtEnabled; // BT is enabled
BOOLEAN bBtConnectProcess; // BT HS is under connection progress.
u1Byte btHsRssi; // BT HS mode wifi rssi value.
BOOLEAN bBtHsOperation; // BT HS mode is under progress
u1Byte btHsDigVal; // use BT rssi to decide the DIG value
BOOLEAN bBtDisableEdcaTurbo; // Under some condition, don't enable the EDCA Turbo
BOOLEAN bBtBusy; // BT is busy.
BOOLEAN bBtLimitedDig; // BT is busy.
//------------CALL BY VALUE-------------//
u1Byte RSSI_A;
u1Byte RSSI_B;
u1Byte RSSI_C;
u1Byte RSSI_D;
u8Byte RSSI_TRSW;
u8Byte RSSI_TRSW_H;
u8Byte RSSI_TRSW_L;
u8Byte RSSI_TRSW_iso;
u1Byte TRXAntStatus;
u1Byte cck_lna_idx;
u1Byte cck_vga_idx;
u1Byte ofdm_agc_idx[4];
u1Byte RxRate;
BOOLEAN bNoisyState;
u1Byte TxRate;
u1Byte LinkedInterval;
u1Byte preChannel;
u4Byte TxagcOffsetValueA;
BOOLEAN IsTxagcOffsetPositiveA;
u4Byte TxagcOffsetValueB;
BOOLEAN IsTxagcOffsetPositiveB;
u8Byte lastTxOkCnt;
u8Byte lastRxOkCnt;
u4Byte BbSwingOffsetA;
BOOLEAN IsBbSwingOffsetPositiveA;
u4Byte BbSwingOffsetB;
BOOLEAN IsBbSwingOffsetPositiveB;
u1Byte antdiv_rssi;
u1Byte fat_comb_a;
u1Byte fat_comb_b;
u1Byte antdiv_intvl;
u1Byte AntType;
u1Byte pre_AntType;
u1Byte antdiv_period;
u1Byte antdiv_select;
u1Byte path_select;
u1Byte antdiv_evm_en;
u1Byte bdc_holdstate;
u1Byte NdpaPeriod;
BOOLEAN H2C_RARpt_connect;
BOOLEAN cck_agc_report_type;
u1Byte dm_dig_max_TH;
u1Byte dm_dig_min_TH;
u1Byte print_agc;
u1Byte consecutive_idlel_time; /*unit: second*/
//For Adaptivtiy
u2Byte NHM_cnt_0;
u2Byte NHM_cnt_1;
s1Byte TH_L2H_ini;
s1Byte TH_EDCCA_HL_diff;
s1Byte TH_L2H_ini_mode2;
s1Byte TH_EDCCA_HL_diff_mode2;
BOOLEAN Carrier_Sense_enable;
u1Byte Adaptivity_IGI_upper;
BOOLEAN adaptivity_flag;
u1Byte DCbackoff;
BOOLEAN Adaptivity_enable;
u1Byte APTotalNum;
BOOLEAN EDCCA_enable;
ADAPTIVITY_STATISTICS Adaptivity;
//For Adaptivtiy
u1Byte LastUSBHub;
u1Byte TxBfDataRate;
u1Byte c2h_cmd_start;
u1Byte fw_debug_trace[60];
u1Byte pre_c2h_seq;
BOOLEAN fw_buff_is_enpty;
u4Byte data_frame_num;
#if (DM_ODM_SUPPORT_TYPE & (ODM_CE))
ODM_NOISE_MONITOR noise_level;//[ODM_MAX_CHANNEL_NUM];
#endif
//
//2 Define STA info.
// _ODM_STA_INFO
// 2012/01/12 MH For MP, we need to reduce one array pointer for default port.??
PSTA_INFO_T pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM];
u2Byte platform2phydm_macid_table[ODM_ASSOCIATE_ENTRY_NUM]; /* platform_macid_table[platform_macid] = phydm_macid */
#if (RATE_ADAPTIVE_SUPPORT == 1)
u2Byte CurrminRptTime;
ODM_RA_INFO_T RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; //Use MacID as array index. STA MacID=0, VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} //YJ,add,120119
#endif
//
// 2012/02/14 MH Add to share 88E ra with other SW team.
// We need to colelct all support abilit to a proper area.
//
BOOLEAN RaSupport88E;
// Define ...........
// Latest packet phy info (ODM write)
ODM_PHY_DBG_INFO_T PhyDbgInfo;
//PHY_INFO_88E PhyInfo;
// Latest packet phy info (ODM write)
ODM_MAC_INFO *pMacInfo;
//MAC_INFO_88E MacInfo;
// Different Team independt structure??
//
//TX_RTP_CMN TX_retrpo;
//TX_RTP_88E TX_retrpo;
//TX_RTP_8195 TX_retrpo;
//
//ODM Structure
//
#if (defined(CONFIG_HW_ANTENNA_DIVERSITY))
#if (DM_ODM_SUPPORT_TYPE & (ODM_AP))
BDC_T DM_BdcTable;
#endif
#endif
FAT_T DM_FatTable;
DIG_T DM_DigTable;
PS_T DM_PSTable;
Pri_CCA_T DM_PriCCA;
#if (DM_ODM_SUPPORT_TYPE & ODM_WIN)
RXHP_T DM_RXHP_Table;
#endif
RA_T DM_RA_Table;
FALSE_ALARM_STATISTICS FalseAlmCnt;
FALSE_ALARM_STATISTICS FlaseAlmCntBuddyAdapter;
SWAT_T DM_SWAT_Table;
BOOLEAN RSSI_test;
CFO_TRACKING DM_CfoTrack;
ACS DM_ACS;
#if (RTL8814A_SUPPORT == 1)
IQK_INFO IQK_info;
#endif /* (RTL8814A_SUPPORT==1) */
#if (DM_ODM_SUPPORT_TYPE & ODM_WIN)
//Path Div Struct
PATHDIV_PARA pathIQK;
#endif
#if(defined(CONFIG_PATH_DIVERSITY))
PATHDIV_T DM_PathDiv;
#endif
EDCA_T DM_EDCA_Table;
u4Byte WMMEDCA_BE;
// Copy from SD4 structure
//
// ==================================================
//
//common
//u1Byte DM_Type;
//u1Byte PSD_Report_RXHP[80]; // Add By Gary
//u1Byte PSD_func_flag; // Add By Gary
//for DIG
//u1Byte bDMInitialGainEnable;
//u1Byte binitialized; // for dm_initial_gain_Multi_STA use.
//for Antenna diversity
//u8 AntDivCfg;// 0:OFF , 1:ON, 2:by efuse
//PSTA_INFO_T RSSI_target;
BOOLEAN *pbDriverStopped;
BOOLEAN *pbDriverIsGoingToPnpSetPowerSleep;
BOOLEAN *pinit_adpt_in_progress;
//PSD
BOOLEAN bUserAssignLevel;
RT_TIMER PSDTimer;
u1Byte RSSI_BT; //come from BT
BOOLEAN bPSDinProcess;
BOOLEAN bPSDactive;
BOOLEAN bDMInitialGainEnable;
//MPT DIG
RT_TIMER MPT_DIGTimer;
//for rate adaptive, in fact, 88c/92c fw will handle this
u1Byte bUseRAMask;
ODM_RATE_ADAPTIVE RateAdaptive;
//#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN | ODM_CE))
#if(defined(CONFIG_ANT_DETECTION))
ANT_DETECTED_INFO AntDetectedInfo; // Antenna detected information for RSSI tool
#endif
ODM_RF_CAL_T RFCalibrateInfo;
//
// Dynamic ATC switch
//
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_CE))
//
// Power Training
//
BOOLEAN bDisablePowerTraining;
u1Byte ForcePowerTrainingState;
BOOLEAN bChangeState;
u4Byte PT_score;
u8Byte OFDM_RX_Cnt;
u8Byte CCK_RX_Cnt;
#endif
//
// ODM system resource.
//
// ODM relative time.
RT_TIMER PathDivSwitchTimer;
//2011.09.27 add for Path Diversity
RT_TIMER CCKPathDiversityTimer;
RT_TIMER FastAntTrainingTimer;
#ifdef ODM_EVM_ENHANCE_ANTDIV
RT_TIMER EVM_FastAntTrainingTimer;
#endif
RT_TIMER sbdcnt_timer;
// ODM relative workitem.
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
#if USE_WORKITEM
RT_WORK_ITEM PathDivSwitchWorkitem;
RT_WORK_ITEM CCKPathDiversityWorkitem;
RT_WORK_ITEM FastAntTrainingWorkitem;
RT_WORK_ITEM MPT_DIGWorkitem;
RT_WORK_ITEM RaRptWorkitem;
RT_WORK_ITEM sbdcnt_workitem;
#endif
#if (BEAMFORMING_SUPPORT == 1)
RT_BEAMFORMING_INFO BeamformingInfo;
#endif
#endif
#if(DM_ODM_SUPPORT_TYPE & ODM_WIN)
#if (RT_PLATFORM != PLATFORM_LINUX)
} DM_ODM_T, *PDM_ODM_T; // DM_Dynamic_Mechanism_Structure
#else
};
#endif
#else// for AP,ADSL,CE Team
} DM_ODM_T, *PDM_ODM_T; // DM_Dynamic_Mechanism_Structure
#endif
typedef enum _PHYDM_STRUCTURE_TYPE{
PHYDM_FALSEALMCNT,
PHYDM_CFOTRACK,
PHYDM_ADAPTIVITY,
PHYDM_ROMINFO,
}PHYDM_STRUCTURE_TYPE;
typedef enum _ODM_RF_CONTENT{
odm_radioa_txt = 0x1000,
odm_radiob_txt = 0x1001,
odm_radioc_txt = 0x1002,
odm_radiod_txt = 0x1003
} ODM_RF_CONTENT;
typedef enum _ODM_BB_Config_Type{
CONFIG_BB_PHY_REG,
CONFIG_BB_AGC_TAB,
CONFIG_BB_AGC_TAB_2G,
CONFIG_BB_AGC_TAB_5G,
CONFIG_BB_PHY_REG_PG,
CONFIG_BB_PHY_REG_MP,
CONFIG_BB_AGC_TAB_DIFF,
} ODM_BB_Config_Type, *PODM_BB_Config_Type;
typedef enum _ODM_RF_Config_Type{
CONFIG_RF_RADIO,
CONFIG_RF_TXPWR_LMT,
} ODM_RF_Config_Type, *PODM_RF_Config_Type;
typedef enum _ODM_FW_Config_Type{
CONFIG_FW_NIC,
CONFIG_FW_NIC_2,
CONFIG_FW_AP,
CONFIG_FW_AP_2,
CONFIG_FW_MP,
CONFIG_FW_WoWLAN,
CONFIG_FW_WoWLAN_2,
CONFIG_FW_AP_WoWLAN,
CONFIG_FW_BT,
} ODM_FW_Config_Type;
// Status code
#if (DM_ODM_SUPPORT_TYPE != ODM_WIN)
typedef enum _RT_STATUS{
RT_STATUS_SUCCESS,
RT_STATUS_FAILURE,
RT_STATUS_PENDING,
RT_STATUS_RESOURCE,
RT_STATUS_INVALID_CONTEXT,
RT_STATUS_INVALID_PARAMETER,
RT_STATUS_NOT_SUPPORT,
RT_STATUS_OS_API_FAILED,
}RT_STATUS,*PRT_STATUS;
#endif // end of RT_STATUS definition
#ifdef REMOVE_PACK
#pragma pack()
#endif
//#include "odm_function.h"
//3===========================================================
//3 DIG
//3===========================================================
//Remove DIG by Yuchen
//3===========================================================
//3 AGC RX High Power Mode
//3===========================================================
#define LNA_Low_Gain_1 0x64
#define LNA_Low_Gain_2 0x5A
#define LNA_Low_Gain_3 0x58
#define FA_RXHP_TH1 5000
#define FA_RXHP_TH2 1500
#define FA_RXHP_TH3 800
#define FA_RXHP_TH4 600
#define FA_RXHP_TH5 500
//3===========================================================
//3 EDCA
//3===========================================================
//3===========================================================
//3 Dynamic Tx Power
//3===========================================================
//Dynamic Tx Power Control Threshold
//Remove By YuChen
//3===========================================================
//3 Tx Power Tracking
//3===========================================================
//3===========================================================
//3 Rate Adaptive
//3===========================================================
//Remove to odm_RaInfo.h by RS_James
//3===========================================================
//3 BB Power Save
//3===========================================================
typedef enum tag_1R_CCA_Type_Definition
{
CCA_1R =0,
CCA_2R = 1,
CCA_MAX = 2,
}DM_1R_CCA_E;
typedef enum tag_RF_Type_Definition
{
RF_Save =0,
RF_Normal = 1,
RF_MAX = 2,
}DM_RF_E;
//
// Extern Global Variables.
//
//PowerTracking move to odm_powerTrakcing.h by YuChen
//
// check Sta pointer valid or not
//
#if (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
#define IS_STA_VALID(pSta) (pSta && pSta->expire_to)
#elif (DM_ODM_SUPPORT_TYPE & ODM_WIN)
#define IS_STA_VALID(pSta) (pSta && pSta->bUsed)
#else
#define IS_STA_VALID(pSta) (pSta)
#endif
//Remove DIG by yuchen
//Remove BB power saving by Yuchen
//remove PT by yuchen
//ODM_RAStateCheck() Remove by RS_James
#if(DM_ODM_SUPPORT_TYPE & (ODM_WIN|ODM_AP|ODM_ADSL))
//============================================================
// function prototype
//============================================================
//#define DM_ChangeDynamicInitGainThresh ODM_ChangeDynamicInitGainThresh
//void ODM_ChangeDynamicInitGainThresh(IN PADAPTER pAdapter,
// IN INT32 DM_Type,
// IN INT32 DM_Value);
//Remove DIG by yuchen
BOOLEAN
ODM_CheckPowerStatus(
IN PADAPTER Adapter
);
//Remove ODM_RateAdaptiveStateApInit() by RS_James
//Remove Edca by YuChen
#endif
u4Byte odm_ConvertTo_dB(u4Byte Value);
u4Byte odm_ConvertTo_linear(u4Byte Value);
#if((DM_ODM_SUPPORT_TYPE==ODM_WIN)||(DM_ODM_SUPPORT_TYPE==ODM_CE))
u4Byte
GetPSDData(
PDM_ODM_T pDM_Odm,
unsigned int point,
u1Byte initial_gain_psd);
#endif
#if (DM_ODM_SUPPORT_TYPE & ODM_WIN)
VOID
ODM_DMWatchdog_LPS(
IN PDM_ODM_T pDM_Odm
);
#endif
s4Byte
ODM_PWdB_Conversion(
IN s4Byte X,
IN u4Byte TotalBit,
IN u4Byte DecimalBit
);
s4Byte
ODM_SignConversion(
IN s4Byte value,
IN u4Byte TotalBit
);
VOID
ODM_DMInit(
IN PDM_ODM_T pDM_Odm
);
VOID
ODM_DMReset(
IN PDM_ODM_T pDM_Odm
);
VOID
phydm_support_ablity_debug(
IN PVOID pDM_VOID,
IN u4Byte *const dm_value,
IN u4Byte *_used,
OUT char *output,
IN u4Byte *_out_len
);
VOID
ODM_DMWatchdog(
IN PDM_ODM_T pDM_Odm // For common use in the future
);
VOID
ODM_CmnInfoInit(
IN PDM_ODM_T pDM_Odm,
IN ODM_CMNINFO_E CmnInfo,
IN u4Byte Value
);
VOID
ODM_CmnInfoHook(
IN PDM_ODM_T pDM_Odm,
IN ODM_CMNINFO_E CmnInfo,
IN PVOID pValue
);
VOID
ODM_CmnInfoPtrArrayHook(
IN PDM_ODM_T pDM_Odm,
IN ODM_CMNINFO_E CmnInfo,
IN u2Byte Index,
IN PVOID pValue
);
VOID
ODM_CmnInfoUpdate(
IN PDM_ODM_T pDM_Odm,
IN u4Byte CmnInfo,
IN u8Byte Value
);
#if(DM_ODM_SUPPORT_TYPE==ODM_AP)
VOID
ODM_InitAllThreads(
IN PDM_ODM_T pDM_Odm
);
VOID
ODM_StopAllThreads(
IN PDM_ODM_T pDM_Odm
);
#endif
VOID
ODM_InitAllTimers(
IN PDM_ODM_T pDM_Odm
);
VOID
ODM_CancelAllTimers(
IN PDM_ODM_T pDM_Odm
);
VOID
ODM_ReleaseAllTimers(
IN PDM_ODM_T pDM_Odm
);
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
VOID ODM_InitAllWorkItems(IN PDM_ODM_T pDM_Odm );
VOID ODM_FreeAllWorkItems(IN PDM_ODM_T pDM_Odm );
u8Byte
PlatformDivision64(
IN u8Byte x,
IN u8Byte y
);
//====================================================
//3 PathDiV End
//====================================================
#define DM_ChangeDynamicInitGainThresh ODM_ChangeDynamicInitGainThresh
//void ODM_ChangeDynamicInitGainThresh(IN PADAPTER pAdapter,
// IN INT32 DM_Type,
// IN INT32 DM_Value);
//
// PathDiveristy Remove by RS_James
typedef enum tag_DIG_Connect_Definition
{
DIG_STA_DISCONNECT = 0,
DIG_STA_CONNECT = 1,
DIG_STA_BEFORE_CONNECT = 2,
DIG_MultiSTA_DISCONNECT = 3,
DIG_MultiSTA_CONNECT = 4,
DIG_CONNECT_MAX
}DM_DIG_CONNECT_E;
//
// 2012/01/12 MH Check afapter status. Temp fix BSOD.
//
#define HAL_ADAPTER_STS_CHK(pDM_Odm)\
if (pDM_Odm->Adapter == NULL)\
{\
return;\
}\
//
// For new definition in MP temporarily fro power tracking,
//
/*
#define odm_TXPowerTrackingDirectCall(_Adapter) \
IS_HARDWARE_TYPE_8192D(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_92D(_Adapter) : \
IS_HARDWARE_TYPE_8192C(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_92C(_Adapter) : \
IS_HARDWARE_TYPE_8723A(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_8723A(_Adapter) :\
ODM_TXPowerTrackingCallback_ThermalMeter(_Adapter)
*/
#endif // #if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
VOID
ODM_AsocEntry_Init(
IN PDM_ODM_T pDM_Odm
);
//Remove ODM_DynamicARFBSelect() by RS_James
PVOID
PhyDM_Get_Structure(
IN PDM_ODM_T pDM_Odm,
IN u1Byte Structure_Type
);
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN) ||(DM_ODM_SUPPORT_TYPE == ODM_CE)
/*===========================================================*/
/* The following is for compile only*/
/*===========================================================*/
#define IS_HARDWARE_TYPE_8723A(_Adapter) FALSE
#define IS_HARDWARE_TYPE_8723AE(_Adapter) FALSE
#define IS_HARDWARE_TYPE_8192C(_Adapter) FALSE
#define IS_HARDWARE_TYPE_8192D(_Adapter) FALSE
#define RF_T_METER_92D 0x42
#define SET_TX_DESC_ANTSEL_A_92C(__pTxDesc, __Value) SET_BITS_TO_LE_1BYTE(__pTxDesc+8+3, 0, 1, __Value)
#define SET_TX_DESC_TX_ANTL_92C(__pTxDesc, __Value) SET_BITS_TO_LE_1BYTE(__pTxDesc+8+3, 4, 2, __Value)
#define SET_TX_DESC_TX_ANT_HT_92C(__pTxDesc, __Value) SET_BITS_TO_LE_1BYTE(__pTxDesc+8+3, 6, 2, __Value)
#define SET_TX_DESC_TX_ANT_CCK_92C(__pTxDesc, __Value) SET_BITS_TO_LE_1BYTE(__pTxDesc+8+3, 2, 2, __Value)
#define GET_RX_STATUS_DESC_RX_MCS(__pRxStatusDesc) LE_BITS_TO_1BYTE( __pRxStatusDesc+12, 0, 6)
#define RX_HAL_IS_CCK_RATE_92C(pDesc)\
(GET_RX_STATUS_DESC_RX_MCS(pDesc) == DESC_RATE1M ||\
GET_RX_STATUS_DESC_RX_MCS(pDesc) == DESC_RATE2M ||\
GET_RX_STATUS_DESC_RX_MCS(pDesc) == DESC_RATE5_5M ||\
GET_RX_STATUS_DESC_RX_MCS(pDesc) == DESC_RATE11M)
#define H2C_92C_PSD_RESULT 16
#define rConfig_ram64x16 0xb2c
#define TARGET_CHNL_NUM_2G_5G 59
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
VOID
FillH2CCmd92C(
IN PADAPTER Adapter,
IN u1Byte ElementID,
IN u4Byte CmdLen,
IN pu1Byte pCmdBuffer
);
VOID
PHY_SetTxPowerLevel8192C(
IN PADAPTER Adapter,
IN u1Byte channel
);
u1Byte GetRightChnlPlaceforIQK(u1Byte chnl);
#endif
//===========================================================
#endif //#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
#if (DM_ODM_SUPPORT_TYPE == ODM_CE)
void odm_dtc(PDM_ODM_T pDM_Odm);
#endif /* #if (DM_ODM_SUPPORT_TYPE == ODM_CE) */
VOID phydm_NoisyDetection(IN PDM_ODM_T pDM_Odm );
void
phydm_receiver_blocking(
IN PVOID pDM_VOID
);
#endif
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags