/* SPDX-License-Identifier: GPL-2.0 */
/******************************************************************************
*
* Copyright(c) 2007 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
/*
* Public General Configure
*/
#define AUTOCONF_INCLUDED
#define RTL871X_MODULE_NAME "8188FU"
#define DRV_NAME "rtl8188fu"
#ifndef CONFIG_RTL8188F
#define CONFIG_RTL8188F
#endif
#define CONFIG_USB_HCI
#define PLATFORM_LINUX
#define RTL8188F_USB_MAC_LOOPBACK 0
/*
* Wi-Fi Functions Configure
*/
#define CONFIG_80211N_HT
#define CONFIG_RECV_REORDERING_CTRL
/* #define CONFIG_IOCTL_CFG80211 */ /* Set from Makefile */
#ifdef CONFIG_IOCTL_CFG80211
/*
* Indicate new sta asoc through cfg80211_new_sta
* If kernel version >= 3.2 or
* version < 3.2 but already apply cfg80211 patch,
* RTW_USE_CFG80211_STA_EVENT must be defined!
*/
/* #define RTW_USE_CFG80211_STA_EVENT */ /* Indicate new sta asoc through cfg80211_new_sta */
#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
/* #define CONFIG_DEBUG_CFG80211 */
/* #define CONFIG_DRV_ISSUE_PROV_REQ */ /* IOT FOR S2 */
#define CONFIG_SET_SCAN_DENY_TIMER
#endif
#define CONFIG_AP_MODE
#ifdef CONFIG_AP_MODE
#define CONFIG_NATIVEAP_MLME
#ifndef CONFIG_NATIVEAP_MLME
#define CONFIG_HOSTAPD_MLME
#endif
/* #define CONFIG_FIND_BEST_CHANNEL */
/* #define CONFIG_AUTO_AP_MODE */
#endif
#define CONFIG_P2P
#ifdef CONFIG_P2P
/*
* Added by Albert 20110812
* The CONFIG_WFD is for supporting the Wi-Fi display
*/
#define CONFIG_WFD
#define CONFIG_P2P_REMOVE_GROUP_INFO
/* #define CONFIG_DBG_P2P */
#define CONFIG_P2P_PS
#define CONFIG_P2P_OP_CHK_SOCIAL_CH
#define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */
/*#define CONFIG_P2P_INVITE_IOT*/
#endif
/*
* Added by Kurt 20110511
*/
#ifdef CONFIG_TDLS
#define CONFIG_TDLS_DRIVER_SETUP
/*
#ifndef CONFIG_WFD
#define CONFIG_WFD
#endif
#define CONFIG_TDLS_AUTOSETUP
*/
#define CONFIG_TDLS_AUTOCHECKALIVE
#define CONFIG_TDLS_CH_SW /* Enable this flag only when we confirm that TDLS CH SW is supported in FW */
#endif
/* #define CONFIG_CONCURRENT_MODE */ /* Set from Makefile */
#ifdef CONFIG_CONCURRENT_MODE
#define CONFIG_TSF_RESET_OFFLOAD /* For 2 PORT TSF SYNC. */
#define CONFIG_RUNTIME_PORT_SWITCH
/* #define DBG_RUNTIME_PORT_SWITCH */
#endif /* CONFIG_CONCURRENT_MODE */
#define CONFIG_LAYER2_ROAMING
#define CONFIG_LAYER2_ROAMING_RESUME
/*
* Hareware/Firmware Related Configure
*/
/* #define CONFIG_ANTENNA_DIVERSITY */
/* #define SUPPORT_HW_RFOFF_DETECTED */
#define CONFIG_RTW_LED
#ifdef CONFIG_RTW_LED
#define CONFIG_RTW_SW_LED
#ifdef CONFIG_RTW_SW_LED
/* define CONFIG_RTW_LED_HANDLED_BY_CMD_THREAD */
#endif
#endif /* CONFIG_RTW_LED */
#define CONFIG_XMIT_ACK
#ifdef CONFIG_XMIT_ACK
#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
#endif
#define CONFIG_RF_POWER_TRIM
#define DISABLE_BB_RF 0
#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
/*
* Interface Related Configure
*/
#define CONFIG_USB_TX_AGGREGATION
#define CONFIG_USB_RX_AGGREGATION
#define CONFIG_GLOBAL_UI_PID
#define CONFIG_OUT_EP_WIFI_MODE
#define ENABLE_USB_DROP_INCORRECT_OUT
/* #define CONFIG_SUPPORT_USB_INT */
#ifdef CONFIG_SUPPORT_USB_INT
/* #define CONFIG_USB_INTERRUPT_IN_PIPE */
#endif
/* #define CONFIG_REDUCE_USB_TX_INT */ /* Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. */
/*
* CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now!
*/
/* #define CONFIG_USE_USB_BUFFER_ALLOC_TX */ /* Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. */
/* #define CONFIG_USE_USB_BUFFER_ALLOC_RX */ /* For RX path */
/*
* USB VENDOR REQ BUFFER ALLOCATION METHOD
* if not set we'll use function local variable (stack memory)
*/
/* #define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE */
#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
#define CONFIG_USB_VENDOR_REQ_MUTEX
#define CONFIG_VENDOR_REQ_RETRY
/* #define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ */
/*
* Others
*/
#define CONFIG_SKB_COPY /* for amsdu */
/* #define CONFIG_EASY_REPLACEMENT */
/* #define CONFIG_ADAPTOR_INFO_CACHING_FILE */ /* now just applied on 8192cu only, should make it general... */
/* #define CONFIG_RESUME_IN_WORKQUEUE */
/* #define CONFIG_SET_SCAN_DENY_TIMER */
#define CONFIG_NEW_SIGNAL_STAT_PROCESS
/* #define CONFIG_SIGNAL_DISPLAY_DBM */ /* display RX signal with dbm */
#ifdef CONFIG_SIGNAL_DISPLAY_DBM
/* #define CONFIG_BACKGROUND_NOISE_MONITOR */
#endif
#define CONFIG_EMBEDDED_FWIMG
#ifdef CONFIG_EMBEDDED_FWIMG
#define LOAD_FW_HEADER_FROM_DRIVER
#endif
/* #define CONFIG_FILE_FWIMG */
#define CONFIG_LONG_DELAY_ISSUE
/*
* Auto Configure Section
*/
#ifdef CONFIG_MINIMAL_MEMORY_USAGE
#undef CONFIG_USB_TX_AGGREGATION
#undef CONFIG_USB_RX_AGGREGATION
#endif
#ifdef CONFIG_MP_INCLUDED
#define MP_DRIVER 1
#define CONFIG_MP_IWPRIV_SUPPORT
/* #undef CONFIG_USB_TX_AGGREGATION */
/* #undef CONFIG_USB_RX_AGGREGATION */
#else /* !CONFIG_MP_INCLUDED */
#define MP_DRIVER 0
#endif /* !CONFIG_MP_INCLUDED */
#ifdef CONFIG_POWER_SAVING
#define CONFIG_IPS
#define CONFIG_LPS
#ifdef CONFIG_IPS
/* #define CONFIG_IPS_LEVEL_2 1 */ /*enable this to set default IPS mode to IPS_LEVEL_2 */
#endif
#if defined(CONFIG_LPS)
#define CONFIG_LPS_LCLK
#endif
#ifdef CONFIG_LPS_LCLK
/* #define CONFIG_XMIT_THREAD_MODE */
#ifndef CONFIG_SUPPORT_USB_INT
#define LPS_RPWM_WAIT_MS 300
#define CONFIG_DETECT_CPWM_BY_POLLING
#endif
#endif
#endif /*CONFIG_POWER_SAVING*/
#ifdef CONFIG_BT_COEXIST
/* for ODM and outsrc BT-Coex */
#ifndef CONFIG_LPS
#define CONFIG_LPS /* download reserved page to FW */
#endif
#endif /* CONFIG_BT_COEXIST */
#ifdef CONFIG_WOWLAN
#define CONFIG_GTK_OL
#endif /* CONFIG_WOWLAN */
#ifdef CONFIG_GPIO_WAKEUP
#ifndef WAKEUP_GPIO_IDX
#define WAKEUP_GPIO_IDX 0 /* WIFI Chip Side */
#endif /* !WAKEUP_GPIO_IDX */
#endif /* CONFIG_GPIO_WAKEUP */
#ifdef CONFIG_AP_MODE
/* #define CONFIG_INTERRUPT_BASED_TXBCN */ /* Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs */
#if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN)
#undef CONFIG_INTERRUPT_BASED_TXBCN
#endif
#ifdef CONFIG_INTERRUPT_BASED_TXBCN
/* #define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT */
#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
#endif
#endif /* CONFIG_AP_MODE */
#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
#else
#define CONFIG_PREALLOC_RECV_SKB
#ifdef CONFIG_PREALLOC_RECV_SKB
/* #define CONFIG_FIX_NR_BULKIN_BUFFER */ /* only use PREALLOC_RECV_SKB buffer, don't alloc skb at runtime */
#endif
#endif
#ifdef CONFIG_USB_TX_AGGREGATION
/* #define CONFIG_TX_EARLY_MODE */
#endif
#ifdef CONFIG_TX_EARLY_MODE
#define RTL8188F_EARLY_MODE_PKT_NUM_10 0
#endif
/*
* Debug Related Configure
*/
#ifdef CONFIG_RTW_DEBUG
#define DBG 1 /* for ODM & BTCOEX debug */
#define DBG_PHYDM_MORE 0
#else /* !CONFIG_RTW_DEBUG */
#define DBG 0 /* for ODM & BTCOEX debug */
#define DBG_PHYDM_MORE 0
#endif /* CONFIG_RTW_DEBUG */
#define CONFIG_PROC_DEBUG
/*
#define DBG_CONFIG_ERROR_DETECT
#define DBG_CONFIG_ERROR_DETECT_INT
#define DBG_CONFIG_ERROR_RESET
#define DBG_IO
#define DBG_DELAY_OS
#define DBG_MEM_ALLOC
#define DBG_IOCTL
#define DBG_TX
#define DBG_XMIT_BUF
#define DBG_XMIT_BUF_EXT
#define DBG_TX_DROP_FRAME
#define DBG_RX_DROP_FRAME
#define DBG_RX_SEQ
#define DBG_RX_SIGNAL_DISPLAY_PROCESSING
#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "rtw-ap"
#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
#define DBG_ROAMING_TEST
#define DBG_HAL_INIT_PROFILING
#define DBG_MEMORY_LEAK
*/
#define DBG_RX_DFRAME_RAW_DATA
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags