/*
* Broadcom PCIE
* Software-specific definitions shared between device and host side
* Explains the shared area between host and dongle
*
* Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
*
* Copyright (C) 1999-2017, Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2 (the "GPL"),
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
* following added to such license:
*
* As a special exception, the copyright holders of this software give you
* permission to link this software with independent modules, and to copy and
* distribute the resulting executable under terms of your choice, provided that
* you also meet, for each linked independent module, the terms and conditions of
* the license of that module. An independent module is a module which is not
* derived from this software. The special exception does not apply to any
* modifications of the software.
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a license
* other than the GPL, without Broadcom's express prior written consent.
*
*
* <<Broadcom-WL-IPTag/Open:>>
*
* $Id$
*/
#ifndef _bcmpcie_h_
#define _bcmpcie_h_
#include <typedefs.h>
#define ADDR_64(x) (x.addr)
#define HIGH_ADDR_32(x) ((uint32) (((sh_addr_t) x).high_addr))
#define LOW_ADDR_32(x) ((uint32) (((sh_addr_t) x).low_addr))
typedef struct {
uint32 low_addr;
uint32 high_addr;
} sh_addr_t;
/* May be overridden by 43xxxxx-roml.mk */
#if !defined(BCMPCIE_MAX_TX_FLOWS)
#define BCMPCIE_MAX_TX_FLOWS 40
#endif /* ! BCMPCIE_MAX_TX_FLOWS */
#define PCIE_SHARED_VERSION_7 0x00007
#define PCIE_SHARED_VERSION_6 0x00006 /* rev6 is compatible with rev 5 */
#define PCIE_SHARED_VERSION_5 0x00005 /* rev6 is compatible with rev 5 */
/**
* Feature flags enabled in dongle. Advertised by dongle to DHD via the PCIe Shared structure that
* is located in device memory.
*/
#define PCIE_SHARED_VERSION_MASK 0x000FF
#define PCIE_SHARED_ASSERT_BUILT 0x00100
#define PCIE_SHARED_ASSERT 0x00200
#define PCIE_SHARED_TRAP 0x00400
#define PCIE_SHARED_IN_BRPT 0x00800
#define PCIE_SHARED_SET_BRPT 0x01000
#define PCIE_SHARED_PENDING_BRPT 0x02000
/* BCMPCIE_SUPPORT_TX_PUSH_RING 0x04000 obsolete */
#define PCIE_SHARED_EVT_SEQNUM 0x08000
#define PCIE_SHARED_DMA_INDEX 0x10000
/**
* There are host types where a device interrupt can 'race ahead' of data written by the device into
* host memory. The dongle can avoid this condition using a variety of techniques (read barrier,
* using PCIe Message Signalled Interrupts, or by using the PCIE_DMA_INDEX feature). Unfortunately
* these techniques have drawbacks on router platforms. For these platforms, it was decided to not
* avoid the condition, but to detect the condition instead and act on it.
* D2H M2M DMA Complete Sync mechanism: Modulo-253-SeqNum or XORCSUM
*/
#define PCIE_SHARED_D2H_SYNC_SEQNUM 0x20000
#define PCIE_SHARED_D2H_SYNC_XORCSUM 0x40000
#define PCIE_SHARED_D2H_SYNC_MODE_MASK \
(PCIE_SHARED_D2H_SYNC_SEQNUM | PCIE_SHARED_D2H_SYNC_XORCSUM)
#define PCIE_SHARED_IDLE_FLOW_RING 0x80000
#define PCIE_SHARED_2BYTE_INDICES 0x100000
#define PCIE_SHARED2_EXTENDED_TRAP_DATA 0x00000001 /* using flags2 in shared area */
#define PCIE_SHARED2_TXSTATUS_METADATA 0x00000002
#define PCIE_SHARED2_BT_LOGGING 0x00000004 /* BT logging support */
#define PCIE_SHARED2_SNAPSHOT_UPLOAD 0x00000008 /* BT/WLAN snapshot upload support */
#define PCIE_SHARED2_SUBMIT_COUNT_WAR 0x00000010 /* submission count WAR */
#define PCIE_SHARED2_FW_SMALL_MEMDUMP 0x00000200 /* FW small memdump */
#define PCIE_SHARED2_DEBUG_BUF_DEST 0x00002000 /* debug buf dest support */
#define PCIE_SHARED_FAST_DELETE_RING 0x00000020 /* Fast Delete Ring */
#define PCIE_SHARED_EVENT_BUF_POOL_MAX 0x000000c0 /* event buffer pool max bits */
#define PCIE_SHARED_EVENT_BUF_POOL_MAX_POS 6 /* event buffer pool max bit position */
/* dongle supports fatal buf log collection */
#define PCIE_SHARED_FATAL_LOGBUG_VALID 0x200000
/* Implicit DMA with corerev 19 and after */
#define PCIE_SHARED_IDMA 0x400000
/* MSI support */
#define PCIE_SHARED_D2H_MSI_MULTI_MSG 0x800000
/* IFRM with corerev 19 and after */
#define PCIE_SHARED_IFRM 0x1000000
/**
* From Rev6 and above, suspend/resume can be done using two handshake methods.
* 1. Using ctrl post/ctrl cmpl messages (Default rev6)
* 2. Using Mailbox data (old method as used in rev5)
* This shared flag indicates whether to overide rev6 default method and use mailbox for
* suspend/resume.
*/
#define PCIE_SHARED_USE_MAILBOX 0x2000000
/* Firmware compiled for mfgbuild purposes */
#define PCIE_SHARED_MFGBUILD_FW 0x4000000
/* Firmware could use DB0 value as host timestamp */
#define PCIE_SHARED_TIMESTAMP_DB0 0x8000000
/* Firmware could use Hostready (IPC rev7) */
#define PCIE_SHARED_HOSTRDY_SUPPORT 0x10000000
/* When set, Firmwar does not support OOB Device Wake based DS protocol */
#define PCIE_SHARED_NO_OOB_DW 0x20000000
/* When set, Firmwar supports Inband DS protocol */
#define PCIE_SHARED_INBAND_DS 0x40000000
/* use DAR registers */
#define PCIE_SHARED_DAR 0x80000000
/**
* Following are the shared2 flags. All bits in flags have been used. A flags2
* field got added and the definition for these flags come here:
*/
/* WAR: D11 txstatus through unused status field of PCIe completion header */
#define PCIE_SHARED2_D2H_D11_TX_STATUS 0x40000000
#define PCIE_SHARED2_H2D_D11_TX_STATUS 0x80000000
#define PCIE_SHARED2_EXTENDED_TRAP_DATA 0x00000001
#define PCIE_SHARED2_TXSTATUS_METADATA 0x00000002
/* BT logging support */
#define PCIE_SHARED2_BT_LOGGING 0x00000004
/* BT/WLAN snapshot upload support */
#define PCIE_SHARED2_SNAPSHOT_UPLOAD 0x00000008
/* submission count WAR */
#define PCIE_SHARED2_SUBMIT_COUNT_WAR 0x00000010
/* Fast Delete ring support */
#define PCIE_SHARED2_FAST_DELETE_RING 0x00000020
/* Host SCB support */
#define PCIE_SHARED2_HSCB 0x00000800
#define PCIE_SHARED_D2H_MAGIC 0xFEDCBA09
#define PCIE_SHARED_H2D_MAGIC 0x12345678
#define PCIE_SHARED2_PKT_TX_STATUS 0x00000100 /* using flags2 to indicate
firmware support added to reuse
timesync to update PKT txstatus
*/
/* Support Enhanced Debug Lane */
#define PCIE_SHARED2_EDL_RING 0x00001000
/* Timestamp in packet */
#define PCIE_SHARED2_PKT_TIMESTAMP 0x00008000
/* HP2P feature */
#define PCIE_SHARED2_HP2P 0x00010000u
/**
* Message rings convey messages between host and device. They are unidirectional, and are located
* in host memory.
*
* This is the minimal set of message rings, known as 'common message rings':
*/
#define BCMPCIE_H2D_MSGRING_CONTROL_SUBMIT 0
#define BCMPCIE_H2D_MSGRING_RXPOST_SUBMIT 1
#define BCMPCIE_D2H_MSGRING_CONTROL_COMPLETE 2
#define BCMPCIE_D2H_MSGRING_TX_COMPLETE 3
#define BCMPCIE_D2H_MSGRING_RX_COMPLETE 4
#define BCMPCIE_COMMON_MSGRING_MAX_ID 4
#define BCMPCIE_H2D_COMMON_MSGRINGS 2
#define BCMPCIE_D2H_COMMON_MSGRINGS 3
#define BCMPCIE_COMMON_MSGRINGS 5
#define BCMPCIE_H2D_MSGRINGS(max_tx_flows) \
(BCMPCIE_H2D_COMMON_MSGRINGS + (max_tx_flows))
/* different ring types */
#define BCMPCIE_H2D_RING_TYPE_CTRL_SUBMIT 0x1
#define BCMPCIE_H2D_RING_TYPE_TXFLOW_RING 0x2
#define BCMPCIE_H2D_RING_TYPE_RXBUFPOST 0x3
#define BCMPCIE_H2D_RING_TYPE_TXSUBMIT 0x4
#define BCMPCIE_H2D_RING_TYPE_DBGBUF_SUBMIT 0x5
#define BCMPCIE_H2D_RING_TYPE_BTLOG_SUBMIT 0x6
#define BCMPCIE_D2H_RING_TYPE_CTRL_CPL 0x1
#define BCMPCIE_D2H_RING_TYPE_TX_CPL 0x2
#define BCMPCIE_D2H_RING_TYPE_RX_CPL 0x3
#define BCMPCIE_D2H_RING_TYPE_DBGBUF_CPL 0x4
#define BCMPCIE_D2H_RING_TYPE_AC_RX_COMPLETE 0x5
#define BCMPCIE_D2H_RING_TYPE_BTLOG_CPL 0x6
#define BCMPCIE_D2H_RING_TYPE_EDL 0x7
#define BCMPCIE_D2H_RING_TYPE_HPP_TX_CPL 0x8
#define BCMPCIE_D2H_RING_TYPE_HPP_RX_CPL 0x9
/**
* H2D and D2H, WR and RD index, are maintained in the following arrays:
* - Array of all H2D WR Indices
* - Array of all H2D RD Indices
* - Array of all D2H WR Indices
* - Array of all D2H RD Indices
*
* The offset of the WR or RD indexes (for common rings) in these arrays are
* listed below. Arrays ARE NOT indexed by a ring's id.
*
* D2H common rings WR and RD index start from 0, even though their ringids
* start from BCMPCIE_H2D_COMMON_MSGRINGS
*/
#define BCMPCIE_H2D_RING_IDX(h2d_ring_id) (h2d_ring_id)
enum h2dring_idx {
/* H2D common rings */
BCMPCIE_H2D_MSGRING_CONTROL_SUBMIT_IDX =
BCMPCIE_H2D_RING_IDX(BCMPCIE_H2D_MSGRING_CONTROL_SUBMIT),
BCMPCIE_H2D_MSGRING_RXPOST_SUBMIT_IDX =
BCMPCIE_H2D_RING_IDX(BCMPCIE_H2D_MSGRING_RXPOST_SUBMIT),
/* First TxPost's WR or RD index starts after all H2D common rings */
BCMPCIE_H2D_MSGRING_TXFLOW_IDX_START =
BCMPCIE_H2D_RING_IDX(BCMPCIE_H2D_COMMON_MSGRINGS)
};
#define BCMPCIE_D2H_RING_IDX(d2h_ring_id) \
((d2h_ring_id) - BCMPCIE_H2D_COMMON_MSGRINGS)
enum d2hring_idx {
/* D2H Common Rings */
BCMPCIE_D2H_MSGRING_CONTROL_COMPLETE_IDX =
BCMPCIE_D2H_RING_IDX(BCMPCIE_D2H_MSGRING_CONTROL_COMPLETE),
BCMPCIE_D2H_MSGRING_TX_COMPLETE_IDX =
BCMPCIE_D2H_RING_IDX(BCMPCIE_D2H_MSGRING_TX_COMPLETE),
BCMPCIE_D2H_MSGRING_RX_COMPLETE_IDX =
BCMPCIE_D2H_RING_IDX(BCMPCIE_D2H_MSGRING_RX_COMPLETE)
};
/**
* Macros for managing arrays of RD WR indices:
* rw_index_sz:
* - in dongle, rw_index_sz is known at compile time
* - in host/DHD, rw_index_sz is derived from advertized pci_shared flags
*
* ring_idx: See h2dring_idx and d2hring_idx
*/
/** Offset of a RD or WR index in H2D or D2H indices array */
#define BCMPCIE_RW_INDEX_OFFSET(rw_index_sz, ring_idx) \
((rw_index_sz) * (ring_idx))
/** Fetch the address of RD or WR index in H2D or D2H indices array */
#define BCMPCIE_RW_INDEX_ADDR(indices_array_base, rw_index_sz, ring_idx) \
(void *)((uint32)(indices_array_base) + \
BCMPCIE_RW_INDEX_OFFSET((rw_index_sz), (ring_idx)))
/** H2D DMA Indices array size: given max flow rings */
#define BCMPCIE_H2D_RW_INDEX_ARRAY_SZ(rw_index_sz, max_tx_flows) \
((rw_index_sz) * BCMPCIE_H2D_MSGRINGS(max_tx_flows))
/** D2H DMA Indices array size */
#define BCMPCIE_D2H_RW_INDEX_ARRAY_SZ(rw_index_sz) \
((rw_index_sz) * BCMPCIE_D2H_COMMON_MSGRINGS)
/**
* This type is used by a 'message buffer' (which is a FIFO for messages). Message buffers are used
* for host<->device communication and are instantiated on both sides. ring_mem_t is instantiated
* both in host as well as device memory.
*/
typedef struct ring_mem {
uint16 idx; /* ring id */
uint8 type;
uint8 rsvd;
uint16 max_item; /* Max number of items in flow ring */
uint16 len_items; /* Items are fixed size. Length in bytes of one item */
sh_addr_t base_addr; /* 64 bits address, either in host or device memory */
} ring_mem_t;
/**
* Per flow ring, information is maintained in device memory, eg at what address the ringmem and
* ringstate are located. The flow ring itself can be instantiated in either host or device memory.
*
* Perhaps this type should be renamed to make clear that it resides in device memory only.
*/
typedef struct ring_info {
uint32 ringmem_ptr; /* ring mem location in dongle memory */
/* Following arrays are indexed using h2dring_idx and d2hring_idx, and not
* by a ringid.
*/
/* 32bit ptr to arrays of WR or RD indices for all rings in dongle memory */
uint32 h2d_w_idx_ptr; /* Array of all H2D ring's WR indices */
uint32 h2d_r_idx_ptr; /* Array of all H2D ring's RD indices */
uint32 d2h_w_idx_ptr; /* Array of all D2H ring's WR indices */
uint32 d2h_r_idx_ptr; /* Array of all D2H ring's RD indices */
/* PCIE_DMA_INDEX feature: Dongle uses mem2mem DMA to sync arrays in host.
* Host may directly fetch WR and RD indices from these host-side arrays.
*
* 64bit ptr to arrays of WR or RD indices for all rings in host memory.
*/
sh_addr_t h2d_w_idx_hostaddr; /* Array of all H2D ring's WR indices */
sh_addr_t h2d_r_idx_hostaddr; /* Array of all H2D ring's RD indices */
sh_addr_t d2h_w_idx_hostaddr; /* Array of all D2H ring's WR indices */
sh_addr_t d2h_r_idx_hostaddr; /* Array of all D2H ring's RD indices */
uint16 max_tx_flowrings; /* maximum number of H2D rings: common + flow */
uint16 max_submission_queues; /* maximum number of H2D rings: common + flow */
uint16 max_completion_rings; /* maximum number of H2D rings: common + flow */
uint16 max_vdevs; /* max number of virtual interfaces supported */
sh_addr_t ifrm_w_idx_hostaddr; /* Array of all H2D ring's WR indices for IFRM */
} ring_info_t;
/**
* A structure located in TCM that is shared between host and device, primarily used during
* initialization.
*/
typedef struct {
/** shared area version captured at flags 7:0 */
uint32 flags;
uint32 trap_addr;
uint32 assert_exp_addr;
uint32 assert_file_addr;
uint32 assert_line;
uint32 console_addr; /**< Address of hnd_cons_t */
uint32 msgtrace_addr;
uint32 fwid;
/* Used for debug/flow control */
uint16 total_lfrag_pkt_cnt;
uint16 max_host_rxbufs; /* rsvd in spec */
uint32 dma_rxoffset; /* rsvd in spec */
/** these will be used for sleep request/ack, d3 req/ack */
uint32 h2d_mb_data_ptr;
uint32 d2h_mb_data_ptr;
/* information pertinent to host IPC/msgbuf channels */
/** location in the TCM memory which has the ring_info */
uint32 rings_info_ptr;
/** block of host memory for the scratch buffer */
uint32 host_dma_scratch_buffer_len;
sh_addr_t host_dma_scratch_buffer;
/* location in host memory for scb host offload structures */
sh_addr_t host_scb_addr;
uint32 host_scb_size;
/* anonymous union for overloading fields in structure */
union {
uint32 buzz_dbg_ptr; /* BUZZZ state format strings and trace buffer */
struct {
/* Host provided trap buffer length in words */
uint16 device_trap_debug_buffer_len;
uint16 rsvd2;
};
};
/* rev6 compatible changes */
uint32 flags2;
uint32 host_cap;
/* location in the host address space to write trap indication.
* At this point for the current rev of the spec, firmware will
* support only indications to 32 bit host addresses.
* This essentially is device_trap_debug_buffer_addr
*/
sh_addr_t host_trap_addr;
/* location for host fatal error log buffer start address */
uint32 device_fatal_logbuf_start;
/* location in host memory for offloaded modules */
sh_addr_t hoffload_addr;
uint32 debug_info_addr; /* Address of debug_info area */
} pciedev_shared_t;
/* Device F/W provides the following access function:
* pciedev_shared_t *hnd_get_pciedev_shared(void);
*/
/* host capabilities */
#define HOSTCAP_PCIEAPI_VERSION_MASK 0x000000FF
#define HOSTCAP_H2D_VALID_PHASE 0x00000100
#define HOSTCAP_H2D_ENABLE_TRAP_ON_BADPHASE 0x00000200
#define HOSTCAP_H2D_ENABLE_HOSTRDY 0x00000400
#define HOSTCAP_DB0_TIMESTAMP 0x00000800
#define HOSTCAP_DS_NO_OOB_DW 0x00001000
#define HOSTCAP_DS_INBAND_DW 0x00002000
#define HOSTCAP_H2D_IDMA 0x00004000
#define HOSTCAP_H2D_IFRM 0x00008000
#define HOSTCAP_H2D_DAR 0x00010000
#define HOSTCAP_EXTENDED_TRAP_DATA 0x00020000
#define HOSTCAP_TXSTATUS_METADATA 0x00040000
#define HOSTCAP_BT_LOGGING 0x00080000
#define HOSTCAP_SNAPSHOT_UPLOAD 0x00100000
#define HOSTCAP_FAST_DELETE_RING 0x00200000
#define HOSTCAP_PKT_TXSTATUS 0x00400000
#define HOSTCAP_UR_FW_NO_TRAP 0x00800000 /* Don't trap on UR */
#define HOSTCAP_HSCB 0x02000000
/* Host support for extended device trap debug buffer */
#define HOSTCAP_EXT_TRAP_DBGBUF 0x04000000
/* Host support for enhanced debug lane */
#define HOSTCAP_EDL_RING 0x10000000
#define HOSTCAP_PKT_TIMESTAMP 0x20000000
#define HOSTCAP_PKT_HP2P 0x40000000
/* extended trap debug buffer allocation sizes. Note that this buffer can be used for
* other trap related purposes also.
*/
#define BCMPCIE_HOST_EXT_TRAP_DBGBUF_LEN_MIN (64u * 1024u)
#define BCMPCIE_HOST_EXT_TRAP_DBGBUF_LEN_MAX (256u * 1024u)
/**
* Mailboxes notify a remote party that an event took place, using interrupts. They use hardware
* support.
*/
/* H2D mail box Data */
#define H2D_HOST_D3_INFORM 0x00000001
#define H2D_HOST_DS_ACK 0x00000002
#define H2D_HOST_DS_NAK 0x00000004
#define H2D_HOST_D0_INFORM_IN_USE 0x00000008
#define H2D_HOST_D0_INFORM 0x00000010
#define H2DMB_DS_ACTIVE 0x00000020
#define H2DMB_DS_DEVICE_WAKE 0x00000040
#define H2D_HOST_IDMA_INITED 0x00000080
#define H2D_HOST_ACK_NOINT 0x00010000 /* d2h_ack interrupt ignore */
#define H2D_HOST_CONS_INT 0x80000000 /**< h2d int for console cmds */
#define H2D_FW_TRAP 0x20000000 /**< h2d force TRAP */
#define H2DMB_DS_HOST_SLEEP_INFORM H2D_HOST_D3_INFORM
#define H2DMB_DS_DEVICE_SLEEP_ACK H2D_HOST_DS_ACK
#define H2DMB_DS_DEVICE_SLEEP_NAK H2D_HOST_DS_NAK
#define H2DMB_D0_INFORM_IN_USE H2D_HOST_D0_INFORM_IN_USE
#define H2DMB_D0_INFORM H2D_HOST_D0_INFORM
#define H2DMB_FW_TRAP H2D_FW_TRAP
#define H2DMB_HOST_CONS_INT H2D_HOST_CONS_INT
#define H2DMB_DS_DEVICE_WAKE_ASSERT H2DMB_DS_DEVICE_WAKE
#define H2DMB_DS_DEVICE_WAKE_DEASSERT H2DMB_DS_ACTIVE
/* D2H mail box Data */
#define D2H_DEV_D3_ACK 0x00000001
#define D2H_DEV_DS_ENTER_REQ 0x00000002
#define D2H_DEV_DS_EXIT_NOTE 0x00000004
#define D2HMB_DS_HOST_SLEEP_EXIT_ACK 0x00000008
#define D2H_DEV_IDMA_INITED 0x00000010
#define D2H_DEV_FWHALT 0x10000000
#define D2H_DEV_TRAP_PING_HOST_FAILURE 0x08000000
#define D2H_DEV_EXT_TRAP_DATA 0x20000000
#define D2H_DEV_TRAP_IN_TRAP 0x40000000
#define D2H_DEV_TRAP_DUE_TO_BT 0x01000000
/* Indicates trap due to HMAP violation */
#define D2H_DEV_TRAP_DUE_TO_HMAP 0x02000000
/* Indicates whether HMAP violation was Write */
#define D2H_DEV_TRAP_HMAP_WRITE 0x04000000
#define D2HMB_DS_HOST_SLEEP_ACK D2H_DEV_D3_ACK
#define D2HMB_DS_DEVICE_SLEEP_ENTER_REQ D2H_DEV_DS_ENTER_REQ
#define D2HMB_DS_DEVICE_SLEEP_EXIT D2H_DEV_DS_EXIT_NOTE
#define D2HMB_FWHALT D2H_DEV_FWHALT
#define D2HMB_TRAP_IN_TRAP D2H_DEV_TRAP_IN_TRAP
#define D2HMB_EXT_TRAP_DATA D2H_DEV_EXT_TRAP_DATA
#define D2H_FWTRAP_MASK 0x0000001F /* Adding maskbits for TRAP information */
#define D2H_DEV_MB_MASK (D2H_DEV_D3_ACK | D2H_DEV_DS_ENTER_REQ | \
D2H_DEV_DS_EXIT_NOTE | D2H_DEV_IDMA_INITED | D2H_DEV_FWHALT | \
D2H_FWTRAP_MASK | D2H_DEV_EXT_TRAP_DATA | D2H_DEV_TRAP_IN_TRAP)
#define D2H_DEV_MB_INVALIDATED(x) ((!x) || (x & ~D2H_DEV_MB_MASK))
/* Size of Extended Trap data Buffer */
#define BCMPCIE_EXT_TRAP_DATA_MAXLEN 4096
/** These macro's operate on type 'inuse_lclbuf_pool_t' and are used by firmware only */
#define PREVTXP(i, d) (((i) == 0) ? ((d) - 1) : ((i) - 1))
#define NEXTTXP(i, d) ((((i)+1) >= (d)) ? 0 : ((i)+1))
#define NEXTNTXP(i, n, d) ((((i)+(n)) >= (d)) ? 0 : ((i)+(n)))
#define NTXPACTIVE(r, w, d) (((r) <= (w)) ? ((w)-(r)) : ((d)-(r)+(w)))
#define NTXPAVAIL(r, w, d) (((d) - NTXPACTIVE((r), (w), (d))) > 1)
/* Function can be used to notify host of FW halt */
#define READ_AVAIL_SPACE(w, r, d) ((w >= r) ? (uint32)(w - r) : (uint32)(d - r))
#define WRITE_SPACE_AVAIL_CONTINUOUS(r, w, d) ((w >= r) ? (d - w) : (r - w))
#define WRITE_SPACE_AVAIL(r, w, d) (d - (NTXPACTIVE(r, w, d)) - 1)
#define CHECK_WRITE_SPACE(r, w, d) ((r) > (w)) ? \
(uint32)((r) - (w) - 1) : ((r) == 0 || (w) == 0) ? \
(uint32)((d) - (w) - 1) : (uint32)((d) - (w))
#define CHECK_NOWRITE_SPACE(r, w, d) \
(((uint32)(r) == (uint32)((w) + 1)) || (((r) == 0) && ((w) == ((d) - 1))))
#define WRT_PEND(x) ((x)->wr_pending)
#define DNGL_RING_WPTR(msgbuf) (*((msgbuf)->tcm_rs_w_ptr)) /**< advanced by producer */
#define BCMMSGBUF_RING_SET_W_PTR(msgbuf, a) (DNGL_RING_WPTR(msgbuf) = (a))
#define DNGL_RING_RPTR(msgbuf) (*((msgbuf)->tcm_rs_r_ptr)) /**< advanced by consumer */
#define BCMMSGBUF_RING_SET_R_PTR(msgbuf, a) (DNGL_RING_RPTR(msgbuf) = (a))
#define MODULO_RING_IDX(x, y) ((x) % (y)->bitmap_size)
#define RING_READ_PTR(x) ((x)->ringstate->r_offset)
#define RING_WRITE_PTR(x) ((x)->ringstate->w_offset)
#define RING_START_PTR(x) ((x)->ringmem->base_addr.low_addr)
#define RING_MAX_ITEM(x) ((x)->ringmem->max_item)
#define RING_LEN_ITEMS(x) ((x)->ringmem->len_items)
#define HOST_RING_BASE(x) ((x)->dma_buf.va)
#define HOST_RING_END(x) ((uint8 *)HOST_RING_BASE((x)) + \
((RING_MAX_ITEM((x))-1)*RING_LEN_ITEMS((x))))
/* Trap types copied in the pciedev_shared.trap_addr */
#define FW_INITIATED_TRAP_TYPE (0x1 << 7)
#define HEALTHCHECK_NODS_TRAP_TYPE (0x1 << 6)
#endif /* _bcmpcie_h_ */
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags