/*
* Common OS-independent driver header for rate management.
*
* Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
*
* Copyright (C) 1999-2017, Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2 (the "GPL"),
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
* following added to such license:
*
* As a special exception, the copyright holders of this software give you
* permission to link this software with independent modules, and to copy and
* distribute the resulting executable under terms of your choice, provided that
* you also meet, for each linked independent module, the terms and conditions of
* the license of that module. An independent module is a module which is not
* derived from this software. The special exception does not apply to any
* modifications of the software.
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a license
* other than the GPL, without Broadcom's express prior written consent.
*
*
* <<Broadcom-WL-IPTag/Open:>>
*
* $Id$
*/
#ifndef _bcmwifi_rspec_h_
#define _bcmwifi_rspec_h_
#include <typedefs.h>
/**
* ===================================================================================
* rate spec : holds rate and mode specific information required to generate a tx frame.
* Legacy CCK and OFDM information is held in the same manner as was done in the past.
* (in the lower byte) the upper 3 bytes primarily hold MIMO specific information
* ===================================================================================
*/
typedef uint32 ratespec_t;
/* Rate spec. definitions */
#define WL_RSPEC_RATE_MASK 0x000000FF /**< Legacy rate or MCS or MCS + NSS */
#define WL_RSPEC_TXEXP_MASK 0x00000300 /**< Tx chain expansion beyond Nsts */
#define WL_RSPEC_TXEXP_SHIFT 8
#define WL_RSPEC_HE_GI_MASK 0x00000C00 /* HE GI indices */
#define WL_RSPEC_HE_GI_SHIFT 10
#define WL_RSPEC_BW_MASK 0x00070000 /**< Band width */
#define WL_RSPEC_BW_SHIFT 16
#define WL_RSPEC_DCM 0x00080000 /**< Dual Carrier Modulation */
#define WL_RSPEC_STBC 0x00100000 /**< STBC expansion, Nsts = 2 * Nss */
#define WL_RSPEC_TXBF 0x00200000
#define WL_RSPEC_LDPC 0x00400000
#define WL_RSPEC_SGI 0x00800000
#define WL_RSPEC_SHORT_PREAMBLE 0x00800000 /**< DSSS short preable - Encoding 0 */
#define WL_RSPEC_ENCODING_MASK 0x03000000 /**< Encoding of RSPEC_RATE field */
#define WL_RSPEC_ENCODING_SHIFT 24
#define WL_RSPEC_OVERRIDE_RATE 0x40000000 /**< override rate only */
#define WL_RSPEC_OVERRIDE_MODE 0x80000000 /**< override both rate & mode */
/* ======== RSPEC_HE_GI|RSPEC_SGI fields for HE ======== */
/* GI for HE */
#define RSPEC_HE_LTF_GI(rspec) (((rspec) & WL_RSPEC_HE_GI_MASK) >> WL_RSPEC_HE_GI_SHIFT)
#define WL_RSPEC_HE_1x_LTF_GI_0_8us (0x0)
#define WL_RSPEC_HE_2x_LTF_GI_0_8us (0x1)
#define WL_RSPEC_HE_2x_LTF_GI_1_6us (0x2)
#define WL_RSPEC_HE_4x_LTF_GI_3_2us (0x3)
#define RSPEC_ISHEGI(rspec) (RSPEC_HE_LTF_GI(rspec) > WL_RSPEC_HE_1x_LTF_GI_0_8us)
#define HE_GI_TO_RSPEC(gi) (((gi) << WL_RSPEC_HE_GI_SHIFT) & WL_RSPEC_HE_GI_MASK)
/* ======== RSPEC_RATE field ======== */
/* Encoding 0 - legacy rate */
/* DSSS, CCK, and OFDM rates in [500kbps] units */
#define WL_RSPEC_LEGACY_RATE_MASK 0x0000007F
#define WLC_RATE_1M 2
#define WLC_RATE_2M 4
#define WLC_RATE_5M5 11
#define WLC_RATE_11M 22
#define WLC_RATE_6M 12
#define WLC_RATE_9M 18
#define WLC_RATE_12M 24
#define WLC_RATE_18M 36
#define WLC_RATE_24M 48
#define WLC_RATE_36M 72
#define WLC_RATE_48M 96
#define WLC_RATE_54M 108
/* Encoding 1 - HT MCS */
#define WL_RSPEC_HT_MCS_MASK 0x0000007F /**< HT MCS value mask in rspec */
/* Encoding 2 - VHT MCS + NSS */
#define WL_RSPEC_VHT_MCS_MASK 0x0000000F /**< VHT MCS value mask in rspec */
#define WL_RSPEC_VHT_NSS_MASK 0x000000F0 /**< VHT Nss value mask in rspec */
#define WL_RSPEC_VHT_NSS_SHIFT 4 /**< VHT Nss value shift in rspec */
/* Encoding 3 - HE MCS + NSS */
#define WL_RSPEC_HE_MCS_MASK 0x0000000F /**< HE MCS value mask in rspec */
#define WL_RSPEC_HE_NSS_MASK 0x000000F0 /**< HE Nss value mask in rspec */
#define WL_RSPEC_HE_NSS_SHIFT 4 /**< HE Nss value shift in rpsec */
/* ======== RSPEC_BW field ======== */
#define WL_RSPEC_BW_UNSPECIFIED 0
#define WL_RSPEC_BW_20MHZ 0x00010000
#define WL_RSPEC_BW_40MHZ 0x00020000
#define WL_RSPEC_BW_80MHZ 0x00030000
#define WL_RSPEC_BW_160MHZ 0x00040000
/* ======== RSPEC_ENCODING field ======== */
#define WL_RSPEC_ENCODE_RATE 0x00000000 /**< Legacy rate is stored in RSPEC_RATE */
#define WL_RSPEC_ENCODE_HT 0x01000000 /**< HT MCS is stored in RSPEC_RATE */
#define WL_RSPEC_ENCODE_VHT 0x02000000 /**< VHT MCS and NSS are stored in RSPEC_RATE */
#define WL_RSPEC_ENCODE_HE 0x03000000 /**< HE MCS and NSS are stored in RSPEC_RATE */
/**
* ===============================
* Handy macros to parse rate spec
* ===============================
*/
#define RSPEC_BW(rspec) ((rspec) & WL_RSPEC_BW_MASK)
#define RSPEC_IS20MHZ(rspec) (RSPEC_BW(rspec) == WL_RSPEC_BW_20MHZ)
#define RSPEC_IS40MHZ(rspec) (RSPEC_BW(rspec) == WL_RSPEC_BW_40MHZ)
#define RSPEC_IS80MHZ(rspec) (RSPEC_BW(rspec) == WL_RSPEC_BW_80MHZ)
#define RSPEC_IS160MHZ(rspec) (RSPEC_BW(rspec) == WL_RSPEC_BW_160MHZ)
#define RSPEC_ISSGI(rspec) (((rspec) & WL_RSPEC_SGI) != 0)
#define RSPEC_ISLDPC(rspec) (((rspec) & WL_RSPEC_LDPC) != 0)
#define RSPEC_ISSTBC(rspec) (((rspec) & WL_RSPEC_STBC) != 0)
#define RSPEC_ISTXBF(rspec) (((rspec) & WL_RSPEC_TXBF) != 0)
#define RSPEC_TXEXP(rspec) (((rspec) & WL_RSPEC_TXEXP_MASK) >> WL_RSPEC_TXEXP_SHIFT)
#define RSPEC_ENCODE(rspec) (((rspec) & WL_RSPEC_ENCODING_MASK) >> WL_RSPEC_ENCODING_SHIFT)
#define RSPEC_ISLEGACY(rspec) (((rspec) & WL_RSPEC_ENCODING_MASK) == WL_RSPEC_ENCODE_RATE)
#define RSPEC_ISCCK(rspec) (RSPEC_ISLEGACY(rspec) && \
(int8)rate_info[(rspec) & WL_RSPEC_LEGACY_RATE_MASK] > 0)
#define RSPEC_ISOFDM(rspec) (RSPEC_ISLEGACY(rspec) && \
(int8)rate_info[(rspec) & WL_RSPEC_LEGACY_RATE_MASK] < 0)
#define RSPEC_ISHT(rspec) (((rspec) & WL_RSPEC_ENCODING_MASK) == WL_RSPEC_ENCODE_HT)
#ifdef WL11AC
#define RSPEC_ISVHT(rspec) (((rspec) & WL_RSPEC_ENCODING_MASK) == WL_RSPEC_ENCODE_VHT)
#else /* WL11AC */
#define RSPEC_ISVHT(rspec) 0
#endif /* WL11AC */
#ifdef WL11AX
#define RSPEC_ISHE(rspec) (((rspec) & WL_RSPEC_ENCODING_MASK) == WL_RSPEC_ENCODE_HE)
#else /* WL11AX */
#define RSPEC_ISHE(rspec) 0
#endif /* WL11AX */
/**
* ================================
* Handy macros to create rate spec
* ================================
*/
/* create ratespecs */
#define LEGACY_RSPEC(rate) (WL_RSPEC_ENCODE_RATE | WL_RSPEC_BW_20MHZ | \
((rate) & WL_RSPEC_LEGACY_RATE_MASK))
#define CCK_RSPEC(cck) LEGACY_RSPEC(cck)
#define OFDM_RSPEC(ofdm) LEGACY_RSPEC(ofdm)
#define HT_RSPEC(mcs) (WL_RSPEC_ENCODE_HT | ((mcs) & WL_RSPEC_HT_MCS_MASK))
#define VHT_RSPEC(mcs, nss) (WL_RSPEC_ENCODE_VHT | \
(((nss) << WL_RSPEC_VHT_NSS_SHIFT) & WL_RSPEC_VHT_NSS_MASK) | \
((mcs) & WL_RSPEC_VHT_MCS_MASK))
#define HE_RSPEC(mcs, nss) (WL_RSPEC_ENCODE_HE | \
(((nss) << WL_RSPEC_HE_NSS_SHIFT) & WL_RSPEC_HE_NSS_MASK) | \
((mcs) & WL_RSPEC_HE_MCS_MASK))
/**
* ==================
* Other handy macros
* ==================
*/
/* return rate in unit of Kbps */
#define RSPEC2KBPS(rspec) wf_rspec_to_rate(rspec)
/* return rate in unit of 500Kbps */
#define RSPEC2RATE(rspec) ((rspec) & WL_RSPEC_LEGACY_RATE_MASK)
/**
* =================================
* Macros to use the rate_info table
* =================================
*/
/* phy_rate table index is in [500kbps] units */
#define WLC_MAXRATE 108 /**< in 500kbps units */
extern const uint8 rate_info[];
/* phy_rate table value is encoded */
#define RATE_INFO_OFDM_MASK 0x80 /* ofdm mask */
#define RATE_INFO_RATE_MASK 0x7f /* rate signal index mask */
#define RATE_INFO_M_RATE_MASK 0x0f /* M_RATE_TABLE index mask */
#define RATE_INFO_RATE_ISCCK(r) ((r) <= WLC_MAXRATE && (int8)rate_info[r] > 0)
#define RATE_INFO_RATE_ISOFDM(r) ((r) <= WLC_MAXRATE && (int8)rate_info[r] < 0)
/**
* ===================
* function prototypes
* ===================
*/
ratespec_t wf_vht_plcp_to_rspec(uint8 *plcp);
ratespec_t wf_he_plcp_to_rspec(uint8 *plcp);
uint wf_rspec_to_rate(ratespec_t rspec);
#endif /* _bcmwifi_rspec_h_ */
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags