Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  1) # SPDX-License-Identifier: GPL-2.0-only
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  2) #
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  3) # Solarflare device configuration
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  4) #
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  5) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  6) config NET_VENDOR_SOLARFLARE
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  7) 	bool "Solarflare devices"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  8) 	default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  9) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10) 	  If you have a network (Ethernet) card belonging to this class, say Y.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) 	  Note that the answer to this question doesn't directly affect the
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13) 	  kernel: saying N will just cause the configurator to skip all
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14) 	  the questions about Solarflare devices. If you say Y, you will be asked
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) 	  for your specific card in the following questions.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) if NET_VENDOR_SOLARFLARE
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) config SFC
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) 	tristate "Solarflare SFC9000/SFC9100/EF100-family support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 21) 	depends on PCI
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 22) 	select MDIO
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 23) 	select CRC32
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 24) 	imply PTP_1588_CLOCK
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 25) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 26) 	  This driver supports 10/40-gigabit Ethernet cards based on
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 27) 	  the Solarflare SFC9000-family and SFC9100-family controllers.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 28) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 29) 	  It also supports 10/25/40/100-gigabit Ethernet cards based
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 30) 	  on the Solarflare EF100 networking IP in Xilinx FPGAs.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 31) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 32) 	  To compile this driver as a module, choose M here.  The module
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 33) 	  will be called sfc.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 34) config SFC_MTD
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 35) 	bool "Solarflare SFC9000/SFC9100-family MTD support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 36) 	depends on SFC && MTD && !(SFC=y && MTD=m)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 37) 	default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 38) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 39) 	  This exposes the on-board flash and/or EEPROM as MTD devices
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 40) 	  (e.g. /dev/mtd1).  This is required to update the firmware or
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 41) 	  the boot configuration under Linux.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 42) config SFC_MCDI_MON
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 43) 	bool "Solarflare SFC9000/SFC9100-family hwmon support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 44) 	depends on SFC && HWMON && !(SFC=y && HWMON=m)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 45) 	default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 46) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 47) 	  This exposes the on-board firmware-managed sensors as a
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 48) 	  hardware monitor device.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 49) config SFC_SRIOV
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 50) 	bool "Solarflare SFC9000-family SR-IOV support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 51) 	depends on SFC && PCI_IOV
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 52) 	default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 53) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 54) 	  This enables support for the SFC9000 I/O Virtualization
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 55) 	  features, allowing accelerated network performance in
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 56) 	  virtualized environments.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 57) config SFC_MCDI_LOGGING
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 58) 	bool "Solarflare SFC9000/SFC9100-family MCDI logging support"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 59) 	depends on SFC
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 60) 	default y
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 61) 	help
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 62) 	  This enables support for tracing of MCDI (Management-Controller-to-
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 63) 	  Driver-Interface) commands and responses, allowing debugging of
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 64) 	  driver/firmware interaction.  The tracing is actually enabled by
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 65) 	  a sysfs file 'mcdi_logging' under the PCI device.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 66) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 67) source "drivers/net/ethernet/sfc/falcon/Kconfig"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 68) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 69) endif # NET_VENDOR_SOLARFLARE