Orange Pi5 kernel

/* SPDX-License-Identifier: GPL-2.0 */
/********************************************************************************
 *
 *  Copyright (C) 2017 	NEXTCHIP Inc. All rights reserved.
 *  Module		: Jaguar1 Device Driver
 *  Description	: coax_protocol.h
 *  Author		:
 *  Date         :
 *  Version		: Version 1.0
 *
 ********************************************************************************
 *  History      :
 *
 *
 ********************************************************************************/
#ifndef _JAGUAR1_COAX_PROTOCOL_
#define _JAGUAR1_COAX_PROTOCOL_

#include "jaguar1_common.h"

#define BANK1 0x01
#define BANK2 0x02
#define BANK3 0x03
#define BANKC 0x0C

#define FW_SUCCESS 0
#define FW_FAILURE -1

#define DBG_TX_INIT_PRINT 0
#define DBG_TX_CMD_PRINT 0
#define DBG_RX_INIT_PRINT 0

/* ACP command status */
#define ACP_CAM_STAT			0x55
#define ACP_REG_WR				0x60
#define ACP_REG_RD				0x61
#define ACP_MODE_ID				0x60

typedef enum NC_COAX_CMD_DEF
{
	COAX_CMD_UNKNOWN = 0,
	COAX_CMD_IRIS_INC,
	COAX_CMD_IRIS_DEC,
	COAX_CMD_FOCUS_INC,
	COAX_CMD_FOCUS_DEC,
	COAX_CMD_ZOOM_INC,
	COAX_CMD_ZOOM_DEC,
	COAX_CMD_OSD_ON,
	COAX_CMD_PTZ_UP,
	COAX_CMD_PTZ_DOWN,
	COAX_CMD_PTZ_LEFT,
	COAX_CMD_PTZ_RIGHT,
	COAX_CMD_OSD_ENTER,
	COAX_CMD_SPECIAL_FW,
	COAX_CMD_SPECIAL_CAMEQ,
	COAX_CMD_SPECIAL_FPS,
	COAX_CMD_SPECIAL_MOTION,
	COAX_CMD_TVI_DOWNSTREAM_REQUEST,

	COAX_CMD_MAX,

} NC_COAX_CMD_DEF;

typedef struct _nc_acp_rw_data_
{
	unsigned char opt;
    unsigned char ch;
	unsigned int addr;
	unsigned char data;
}nc_acp_rw_data;


/*=============================================================
 * Coaxial Test Structure[APP <-> DRV]
 ==============================================================*/
typedef struct NC_VD_COAX_TEST_STR{
	unsigned char ch;
	unsigned char chip_num;
	unsigned char bank;
	unsigned char data_addr;
	unsigned char param;

	unsigned char rx_src;             //B5/6/7/8 0x7C
	unsigned char rx_slice_lev;       //B5/6/7/8 0x7D
	unsigned char tx_baud;            //B3/4 0x00/80
	unsigned char tx_pel_baud;        //B3/4 0x02/82
	unsigned char tx_line_pos0;       //B3/4 0x03/83
	unsigned char tx_line_pos1;       //B3/4 0x04/84
	unsigned char tx_pel_line_pos0;   //B3/4 0x07/87
	unsigned char tx_pel_line_pos1;   //B3/4 0x08/88
	unsigned char tx_line_count;      //B3/4 0x05/85
	unsigned char tx_line_count_max;  //B3/4 0x0A/8A
	unsigned char tx_mode;            //B3/4 0x0B/8B
	unsigned char tx_sync_pos0;       //B3/4 0x0D/8D
	unsigned char tx_sync_pos1;       //B3/4 0x0E/8E
	unsigned char tx_even;            //B3/4 0x2F/AF
	unsigned char tx_zero_length;     //B3/4 0x0C/
}NC_VD_COAX_TEST_STR;

typedef struct NC_VD_COAX_BANK_DUMP_STR{
	unsigned char ch;
	unsigned char vd_dev;
	unsigned char bank;

	unsigned char rx_pelco_data[256];

}NC_VD_COAX_BANK_DUMP_STR;

/*=============================================================
 * Coaxial UP/Down Stream Initialize Structure[APP -> DRV]
 ==============================================================*/
typedef struct NC_VD_COAX_STR{
	char *name;
	unsigned char ch;
	unsigned char vd_dev;
	unsigned char param;
	NC_FORMAT_STANDARD format_standard;
	NC_FORMAT_RESOLUTION format_resolution;
	NC_FORMAT_FPS format_fps;
	NC_VIVO_CH_FORMATDEF vivo_fmt;
	NC_COAX_CMD_DEF cmd;

	unsigned char rx_pelco_data[8];
	unsigned char rx_data1[8];
	unsigned char rx_data2[8];
	unsigned char rx_data3[8];
	unsigned char rx_data4[8];
	unsigned char rx_data5[8];
	unsigned char rx_data6[8];

}NC_VD_COAX_STR;

/*=============================================================
 * COAX FW Upgrade
 ==============================================================*/
typedef struct __file_information
{
	unsigned int	channel;                // FirmUP Channel
	unsigned int	cp_mode;                // Channel Format
	unsigned char 	filename[64];           //
	unsigned char 	filePullname[64+32];    // FirmUP FileNmae
	unsigned int	filesize;
	unsigned int	filechecksum;			// (sum of file&0x0000FFFFF)
	unsigned int	currentpacketnum;		// current packet sequnce number(0,1,2........)
	unsigned int	filepacketnum;			// file packet number = (total size/128bytes), if remain exist, file packet number++
	unsigned char 	onepacketbuf[128+32];

	unsigned int	currentFileOffset;		// Current file offset
	unsigned int	readsize;				// currnet read size

	unsigned int receive_addr;

	unsigned int	ispossiblefirmup[16]; 	// is it possible to update firmware?
	int 			result;

	int				appstatus[16];			// Application status

} FIRMWARE_UP_FILE_INFO, *PFIRMWARE_UP_FILE_INFO;

// Coaxial UP Stream Function
void coax_tx_init( void *p_param );     // Coax Tx : Initialize
void coax_tx_cmd_send( void *p_param ); // Coax Tx : Command Send

void coax_tx_16bit_init( void *p_param );
void coax_tx_16bit_cmd_send( void *p_param );
void coax_tx_cvi_new_cmd_send( void *p_param );

// Coaxial Down Stream Function
void coax_rx_init( void *p_param );          // Coax Rx : Initialize
void coax_rx_data_get( void *p_param );      // Coax Rx : All Rx Buffer read
void coax_rx_buffer_clear( void *p_param );  // Coax Rx : Rx Buffer Clear
void coax_rx_deinit( void *p_param );        // Coax Rx : 3x63 Set[ 1 -> 0 ]
void coax_acp_rx_detect_get( void *p_param );

// Coaxial FW Update Function
void coax_fw_ready_header_check_from_isp_recv(void *p_param);
void coax_fw_ready_cmd_to_isp_send(void *p_param);                // 1.1 FW Update Ready Command Send
void coax_fw_ready_cmd_ack_from_isp_recv(void *p_param);          // 1.2 FW Update Ready ACK
void coax_fw_start_cmd_to_isp_send( void *p_param );              // 2.1 FW Update Start Command Send
void coax_fw_start_cmd_ack_from_isp_recv( void *p_param );        // 2.2 FW Update Start ACK
void coax_fw_one_packet_data_to_isp_send( void *p_param );        // 3.1 FW Update One Packet Data Send
void coax_fw_one_packet_data_ack_from_isp_recv( void *p_param );  // 3.2 FW Update One Packet Data ACK
void coax_fw_end_cmd_to_isp_send( void *p_param );                // 4.1 FW Update End Command Send
void coax_fw_end_cmd_ack_from_isp_recv( void *p_param );          // 4.2 FW Update End ACK
void coax_fw_revert_to_previous_fmt_set(void *p_param);

// Coaxial Option
void coax_option_rt_nrt_mode_change_set(void *p_param);    // RT, NRT Mode change

// Coaxial Test Function
void coax_test_tx_init_read(NC_VD_COAX_TEST_STR *coax_tx_mode);    // Coax Test : Tx Init Read
void coax_test_data_set(NC_VD_COAX_TEST_STR *coax_data);           // Coax Test : 1byte Data write
void coax_test_data_get(NC_VD_COAX_TEST_STR *coax_data);           // Coax Test : 1byte Data read
void coax_test_Bank_dump_get(NC_VD_COAX_BANK_DUMP_STR *coax_data); // Bank Dump
void acp_isp_write(unsigned char ch, unsigned int reg_addr, unsigned char reg_data);
unsigned char acp_isp_read(unsigned char ch, unsigned int reg_addr);

#endif
/********************************************************************
 *  End of file
 ********************************************************************/