Orange Pi5 kernel

/* SPDX-License-Identifier: GPL-2.0 */

#ifndef __RKXX_PWM_REMOTECTL_H__
#define __RKXX_PWM_REMOTECTL_H__
#include <linux/input.h>

#define MAX_NUM_KEYS			60
#define PWM_PWR_KEY_CAPURURE_MAX	10

/* PWM0 registers  */
#define PWM_REG_CNTR			0x00  /* Counter Register */
#define PWM_REG_HPR			0x04  /* Period Register */
#define PWM_REG_LPR			0x08  /* Duty Cycle Register */
#define PWM_REG_CTRL			0x0c  /* Control Register */
#define PWM3_REG_INTSTS			0x10  /* Interrupt Status Refister For Pwm3*/
#define PWM2_REG_INTSTS			0x20  /* Interrupt Status Refister For Pwm2*/
#define PWM1_REG_INTSTS			0x30  /* Interrupt Status Refister For Pwm1*/
#define PWM0_REG_INTSTS			0x40  /* Interrupt Status Refister For Pwm0*/
#define PWM3_REG_INT_EN			0x14  /* Interrupt Enable Refister For Pwm3*/
#define PWM2_REG_INT_EN			0x24  /* Interrupt Enable Refister For Pwm2*/
#define PWM1_REG_INT_EN			0x34  /* Interrupt Enable Refister For Pwm1*/
#define PWM0_REG_INT_EN			0x44  /* Interrupt Enable Refister For Pwm0*/

/*REG_CTRL bits definitions*/
#define PWM_ENABLE			(1 << 0)
#define PWM_DISABLE			(0 << 0)

/*operation mode*/
#define PWM_MODE_ONESHOT		(0x00 << 1)
#define PWM_MODE_CONTINUMOUS		(0x01 << 1)
#define PWM_MODE_CAPTURE		(0x02 << 1)

/*duty cycle output polarity*/
#define PWM_DUTY_POSTIVE		(0x01 << 3)
#define PWM_DUTY_NEGATIVE		(0x00 << 3)

/*incative state output polarity*/
#define PWM_INACTIVE_POSTIVE		(0x01 << 4)
#define PWM_INACTIVE_NEGATIVE		(0x00 << 4)

/*clock source select*/
#define PWM_CLK_SCALE			(1 << 9)
#define PWM_CLK_NON_SCALE		(0 << 9)

#define PWM_CH0_INT			(1 << 0)
#define PWM_CH1_INT			(1 << 1)
#define PWM_CH2_INT			(1 << 2)
#define PWM_CH3_INT			(1 << 3)
#define PWM_PWR_KEY_INT			(1 << 7)

#define PWM_CH0_POL			(1 << 8)
#define PWM_CH1_POL			(1 << 9)
#define PWM_CH2_POL			(1 << 10)
#define PWM_CH3_POL			(1 << 11)

#define PWM_CH0_INT_ENABLE		(1 << 0)
#define PWM_CH0_INT_DISABLE		(0 << 0)

#define PWM_CH1_INT_ENABLE		(1 << 1)
#define PWM_CH1_INT_DISABLE		(0 << 1)

#define PWM_CH2_INT_ENABLE		(1 << 2)
#define PWM_CH2_INT_DISABLE		(0 << 2)

#define PWM_CH3_INT_ENABLE		(1 << 3)
#define PWM_CH3_INT_DISABLE		(0 << 3)

#define PWM_INT_ENABLE			1
#define PWM_INT_DISABLE			0

/*prescale factor*/
#define PWMCR_MIN_PRESCALE			0x00
#define PWMCR_MAX_PRESCALE			0x07

#define PWMDCR_MIN_DUTY				0x0001
#define PWMDCR_MAX_DUTY				0xFFFF

#define PWMPCR_MIN_PERIOD			0x0001
#define PWMPCR_MAX_PERIOD			0xFFFF

#define PWMPCR_MIN_PERIOD			0x0001
#define PWMPCR_MAX_PERIOD			0xFFFF


enum pwm_div {
	PWM_DIV1	= (0x0 << 12),
	PWM_DIV2	= (0x1 << 12),
	PWM_DIV4	= (0x2 << 12),
	PWM_DIV8	= (0x3 << 12),
	PWM_DIV16	= (0x4 << 12),
	PWM_DIV32	= (0x5 << 12),
	PWM_DIV64	= (0x6 << 12),
	PWM_DIV128	= (0x7 << 12),
};

/*  NEC Protocol */
#define RK_PWM_TIME_PRE_MIN		4000
#define RK_PWM_TIME_PRE_MAX		5000

#define RK_PWM_TIME_PRE_MIN_LOW		8000
#define RK_PWM_TIME_PRE_MAX_LOW		10000

#define RK_PWM_TIME_BIT0_MIN		390
#define RK_PWM_TIME_BIT0_MAX		730

#define RK_PWM_TIME_BIT1_MIN		1300
#define RK_PWM_TIME_BIT1_MAX		2000

#define RK_PWM_TIME_BIT_MIN_LOW		390
#define RK_PWM_TIME_BIT_MAX_LOW		730

#define RK_PWM_TIME_RPT_MIN		2000
#define RK_PWM_TIME_RPT_MAX		2500

#define RK_PWM_TIME_SEQ1_MIN		95000
#define RK_PWM_TIME_SEQ1_MAX		98000

#define RK_PWM_TIME_SEQ2_MIN		30000
#define RK_PWM_TIME_SEQ2_MAX		55000


#define PWM_REG_INTSTS(n)		((3 - (n)) * 0x10 + 0x10)
#define PWM_REG_INT_EN(n)		((3 - (n)) * 0x10 + 0x14)
#define RK_PWM_VERSION_ID(n)		((3 - (n)) * 0x10 + 0x2c)
#define PWM_REG_PWRMATCH_CTRL(n)	((3 - (n)) * 0x10 + 0x50)
#define PWM_REG_PWRMATCH_LPRE(n)	((3 - (n)) * 0x10 + 0x54)
#define PWM_REG_PWRMATCH_HPRE(n)	((3 - (n)) * 0x10 + 0x58)
#define PWM_REG_PWRMATCH_LD(n)		((3 - (n)) * 0x10 + 0x5C)
#define PWM_REG_PWRMATCH_HD_ZERO(n)	((3 - (n)) * 0x10 + 0x60)
#define PWM_REG_PWRMATCH_HD_ONE(n)	((3 - (n)) * 0x10 + 0x64)
#define PWM_PWRMATCH_VALUE(n)		((3 - (n)) * 0x10 + 0x68)
#define PWM_PWRCAPTURE_VALUE(n)		((3 - (n)) * 0x10 + 0x9c)

#define PWM_CH_INT(n)			BIT(n)
#define PWM_CH_POL(n)			BIT(n+8)

#define PWM_CH_INT_ENABLE(n)		BIT(n)
#define PWM_PWR_INT_ENABLE		BIT(7)
#define CH3_PWRKEY_ENABLE		BIT(3)




typedef enum _RMC_STATE {
	RMC_IDLE,
	RMC_PRELOAD,
	RMC_USERCODE,
	RMC_GETDATA,
	RMC_SEQUENCE,
} eRMC_STATE;


struct RKxx_remotectl_platform_data {
	int nbuttons;
	int rep;
	int timer;
	int wakeup;
};

#endif