Orange Pi5 kernel

/*
 * Synaptics touchpad with I2C interface
 *
 * Copyright (C) 2009 Compulab, Ltd.
 * Mike Rapoport <mike@compulab.co.il>
 * Igor Grinberg <grinberg@compulab.co.il>
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive for
 * more details.
 */
 
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
#include <linux/pm.h>
 
#define DRIVER_NAME		"synaptics_i2c"
/* maximum product id is 15 characters */
#define PRODUCT_ID_LENGTH	15
#define REGISTER_LENGTH		8
 
/*
 * after soft reset, we should wait for 1 ms
 * before the device becomes operational
 */
#define SOFT_RESET_DELAY_US	3000
/* and after hard reset, we should wait for max 500ms */
#define HARD_RESET_DELAY_MS	500
 
/* Registers by SMBus address */
#define PAGE_SEL_REG		0xff
#define DEVICE_STATUS_REG	0x09
 
/* Registers by RMI address */
#define DEV_CONTROL_REG		0x0000
#define INTERRUPT_EN_REG	0x0001
#define ERR_STAT_REG		0x0002
#define INT_REQ_STAT_REG	0x0003
#define DEV_COMMAND_REG		0x0004
 
#define RMI_PROT_VER_REG	0x0200
#define MANUFACT_ID_REG		0x0201
#define PHYS_INT_VER_REG	0x0202
#define PROD_PROPERTY_REG	0x0203
#define INFO_QUERY_REG0		0x0204
#define INFO_QUERY_REG1		(INFO_QUERY_REG0 + 1)
#define INFO_QUERY_REG2		(INFO_QUERY_REG0 + 2)
#define INFO_QUERY_REG3		(INFO_QUERY_REG0 + 3)
 
#define PRODUCT_ID_REG0		0x0210
#define PRODUCT_ID_REG1		(PRODUCT_ID_REG0 + 1)
#define PRODUCT_ID_REG2		(PRODUCT_ID_REG0 + 2)
#define PRODUCT_ID_REG3		(PRODUCT_ID_REG0 + 3)
#define PRODUCT_ID_REG4		(PRODUCT_ID_REG0 + 4)
#define PRODUCT_ID_REG5		(PRODUCT_ID_REG0 + 5)
#define PRODUCT_ID_REG6		(PRODUCT_ID_REG0 + 6)
#define PRODUCT_ID_REG7		(PRODUCT_ID_REG0 + 7)
#define PRODUCT_ID_REG8		(PRODUCT_ID_REG0 + 8)
#define PRODUCT_ID_REG9		(PRODUCT_ID_REG0 + 9)
#define PRODUCT_ID_REG10	(PRODUCT_ID_REG0 + 10)
#define PRODUCT_ID_REG11	(PRODUCT_ID_REG0 + 11)
#define PRODUCT_ID_REG12	(PRODUCT_ID_REG0 + 12)
#define PRODUCT_ID_REG13	(PRODUCT_ID_REG0 + 13)
#define PRODUCT_ID_REG14	(PRODUCT_ID_REG0 + 14)
#define PRODUCT_ID_REG15	(PRODUCT_ID_REG0 + 15)
 
#define DATA_REG0		0x0400
#define ABS_PRESSURE_REG	0x0401
#define ABS_MSB_X_REG		0x0402
#define ABS_LSB_X_REG		(ABS_MSB_X_REG + 1)
#define ABS_MSB_Y_REG		0x0404
#define ABS_LSB_Y_REG		(ABS_MSB_Y_REG + 1)
#define REL_X_REG		0x0406
#define REL_Y_REG		0x0407
 
#define DEV_QUERY_REG0		0x1000
#define DEV_QUERY_REG1		(DEV_QUERY_REG0 + 1)
#define DEV_QUERY_REG2		(DEV_QUERY_REG0 + 2)
#define DEV_QUERY_REG3		(DEV_QUERY_REG0 + 3)
#define DEV_QUERY_REG4		(DEV_QUERY_REG0 + 4)
#define DEV_QUERY_REG5		(DEV_QUERY_REG0 + 5)
#define DEV_QUERY_REG6		(DEV_QUERY_REG0 + 6)
#define DEV_QUERY_REG7		(DEV_QUERY_REG0 + 7)
#define DEV_QUERY_REG8		(DEV_QUERY_REG0 + 8)
 
#define GENERAL_2D_CONTROL_REG	0x1041
#define SENSOR_SENSITIVITY_REG	0x1044
#define SENS_MAX_POS_MSB_REG	0x1046
#define SENS_MAX_POS_LSB_REG	(SENS_MAX_POS_UPPER_REG + 1)
 
/* Register bits */
/* Device Control Register Bits */
#define REPORT_RATE_1ST_BIT	6
 
/* Interrupt Enable Register Bits (INTERRUPT_EN_REG) */
#define F10_ABS_INT_ENA		0
#define F10_REL_INT_ENA		1
#define F20_INT_ENA		2
 
/* Interrupt Request Register Bits (INT_REQ_STAT_REG | DEVICE_STATUS_REG) */
#define F10_ABS_INT_REQ		0
#define F10_REL_INT_REQ		1
#define F20_INT_REQ		2
/* Device Status Register Bits (DEVICE_STATUS_REG) */
#define STAT_CONFIGURED		6
#define STAT_ERROR		7
 
/* Device Command Register Bits (DEV_COMMAND_REG) */
#define RESET_COMMAND		0x01
#define REZERO_COMMAND		0x02
 
/* Data Register 0 Bits (DATA_REG0) */
#define GESTURE			3
 
/* Device Query Registers Bits */
/* DEV_QUERY_REG3 */
#define HAS_PALM_DETECT		1
#define HAS_MULTI_FING		2
#define HAS_SCROLLER		4
#define HAS_2D_SCROLL		5
 
/* General 2D Control Register Bits (GENERAL_2D_CONTROL_REG) */
#define NO_DECELERATION		1
#define REDUCE_REPORTING	3
#define NO_FILTER		5
 
/* Function Masks */
/* Device Control Register Masks (DEV_CONTROL_REG) */
#define REPORT_RATE_MSK		0xc0
#define SLEEP_MODE_MSK		0x07
 
/* Device Sleep Modes */
#define FULL_AWAKE		0x0
#define NORMAL_OP		0x1
#define LOW_PWR_OP		0x2
#define VERY_LOW_PWR_OP		0x3
#define SENS_SLEEP		0x4
#define SLEEP_MOD		0x5
#define DEEP_SLEEP		0x6
#define HIBERNATE		0x7
 
/* Interrupt Register Mask */
/* (INT_REQ_STAT_REG | DEVICE_STATUS_REG | INTERRUPT_EN_REG) */
#define INT_ENA_REQ_MSK		0x07
#define INT_ENA_ABS_MSK		0x01
#define INT_ENA_REL_MSK		0x02
#define INT_ENA_F20_MSK		0x04
 
/* Device Status Register Masks (DEVICE_STATUS_REG) */
#define CONFIGURED_MSK		0x40
#define ERROR_MSK		0x80
 
/* Data Register 0 Masks */
#define FINGER_WIDTH_MSK	0xf0
#define GESTURE_MSK		0x08
#define SENSOR_STATUS_MSK	0x07
 
/*
 * MSB Position Register Masks
 * ABS_MSB_X_REG | ABS_MSB_Y_REG | SENS_MAX_POS_MSB_REG |
 * DEV_QUERY_REG3 | DEV_QUERY_REG5
 */
#define MSB_POSITION_MSK	0x1f
 
/* Device Query Registers Masks */
 
/* DEV_QUERY_REG2 */
#define NUM_EXTRA_POS_MSK	0x07
 
/* When in IRQ mode read the device every THREAD_IRQ_SLEEP_SECS */
#define THREAD_IRQ_SLEEP_SECS	2
#define THREAD_IRQ_SLEEP_MSECS	(THREAD_IRQ_SLEEP_SECS * MSEC_PER_SEC)
 
/*
 * When in Polling mode and no data received for NO_DATA_THRES msecs
 * reduce the polling rate to NO_DATA_SLEEP_MSECS
 */
#define NO_DATA_THRES		(MSEC_PER_SEC)
#define NO_DATA_SLEEP_MSECS	(MSEC_PER_SEC / 4)
 
/* Control touchpad's No Deceleration option */
static bool no_decel = true;
module_param(no_decel, bool, 0644);
MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)");
 
/* Control touchpad's Reduced Reporting option */
static bool reduce_report;
module_param(reduce_report, bool, 0644);
MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)");
 
/* Control touchpad's No Filter option */
static bool no_filter;
module_param(no_filter, bool, 0644);
MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)");
 
/*
 * touchpad Attention line is Active Low and Open Drain,
 * therefore should be connected to pulled up line
 * and the irq configuration should be set to Falling Edge Trigger
 */
/* Control IRQ / Polling option */
static bool polling_req;
module_param(polling_req, bool, 0444);
MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)");
 
/* Control Polling Rate */
static int scan_rate = 80;
module_param(scan_rate, int, 0644);
MODULE_PARM_DESC(scan_rate, "Polling rate in times/sec. Default = 80");
 
/* The main device structure */
struct synaptics_i2c {
<------>struct i2c_client	*client;
<------>struct input_dev	*input;
<------>struct delayed_work	dwork;
<------>int			no_data_count;
<------>int			no_decel_param;
<------>int			reduce_report_param;
<------>int			no_filter_param;
<------>int			scan_rate_param;
<------>int			scan_ms;
};
 
static inline void set_scan_rate(struct synaptics_i2c *touch, int scan_rate)
{
<------>touch->scan_ms = MSEC_PER_SEC / scan_rate;
<------>touch->scan_rate_param = scan_rate;
}
 
/*
 * Driver's initial design makes no race condition possible on i2c bus,
 * so there is no need in any locking.
 * Keep it in mind, while playing with the code.
 */
static s32 synaptics_i2c_reg_get(struct i2c_client *client, u16 reg)
{
<------>int ret;
 
<------>ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
<------>if (ret == 0)
<------><------>ret = i2c_smbus_read_byte_data(client, reg & 0xff);
 
<------>return ret;
}
 
static s32 synaptics_i2c_reg_set(struct i2c_client *client, u16 reg, u8 val)
{
<------>int ret;
 
<------>ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
<------>if (ret == 0)
<------><------>ret = i2c_smbus_write_byte_data(client, reg & 0xff, val);
 
<------>return ret;
}
 
static s32 synaptics_i2c_word_get(struct i2c_client *client, u16 reg)
{
<------>int ret;
 
<------>ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
<------>if (ret == 0)
<------><------>ret = i2c_smbus_read_word_data(client, reg & 0xff);
 
<------>return ret;
}
 
static int synaptics_i2c_config(struct i2c_client *client)
{
<------>int ret, control;
<------>u8 int_en;
 
<------>/* set Report Rate to Device Highest (>=80) and Sleep to normal */
<------>ret = synaptics_i2c_reg_set(client, DEV_CONTROL_REG, 0xc1);
<------>if (ret)
<------><------>return ret;
 
<------>/* set Interrupt Disable to Func20 / Enable to Func10) */
<------>int_en = (polling_req) ? 0 : INT_ENA_ABS_MSK | INT_ENA_REL_MSK;
<------>ret = synaptics_i2c_reg_set(client, INTERRUPT_EN_REG, int_en);
<------>if (ret)
<------><------>return ret;
 
<------>control = synaptics_i2c_reg_get(client, GENERAL_2D_CONTROL_REG);
<------>/* No Deceleration */
<------>control |= no_decel ? 1 << NO_DECELERATION : 0;
<------>/* Reduced Reporting */
<------>control |= reduce_report ? 1 << REDUCE_REPORTING : 0;
<------>/* No Filter */
<------>control |= no_filter ? 1 << NO_FILTER : 0;
<------>ret = synaptics_i2c_reg_set(client, GENERAL_2D_CONTROL_REG, control);
<------>if (ret)
<------><------>return ret;
 
<------>return 0;
}
 
static int synaptics_i2c_reset_config(struct i2c_client *client)
{
<------>int ret;
 
<------>/* Reset the Touchpad */
<------>ret = synaptics_i2c_reg_set(client, DEV_COMMAND_REG, RESET_COMMAND);
<------>if (ret) {
<------><------>dev_err(&client->dev, "Unable to reset device\n");
<------>} else {
<------><------>usleep_range(SOFT_RESET_DELAY_US, SOFT_RESET_DELAY_US + 100);
<------><------>ret = synaptics_i2c_config(client);
<------><------>if (ret)
<------><------><------>dev_err(&client->dev, "Unable to config device\n");
<------>}
 
<------>return ret;
}
 
static int synaptics_i2c_check_error(struct i2c_client *client)
{
<------>int status, ret = 0;
 
<------>status = i2c_smbus_read_byte_data(client, DEVICE_STATUS_REG) &
<------><------>(CONFIGURED_MSK | ERROR_MSK);
 
<------>if (status != CONFIGURED_MSK)
<------><------>ret = synaptics_i2c_reset_config(client);
 
<------>return ret;
}
 
static bool synaptics_i2c_get_input(struct synaptics_i2c *touch)
{
<------>struct input_dev *input = touch->input;
<------>int xy_delta, gesture;
<------>s32 data;
<------>s8 x_delta, y_delta;
 
<------>/* Deal with spontaneous resets and errors */
<------>if (synaptics_i2c_check_error(touch->client))
<------><------>return false;
 
<------>/* Get Gesture Bit */
<------>data = synaptics_i2c_reg_get(touch->client, DATA_REG0);
<------>gesture = (data >> GESTURE) & 0x1;
 
<------>/*
<------> * Get Relative axes. we have to get them in one shot,
<------> * so we get 2 bytes starting from REL_X_REG.
<------> */
<------>xy_delta = synaptics_i2c_word_get(touch->client, REL_X_REG) & 0xffff;
 
<------>/* Separate X from Y */
<------>x_delta = xy_delta & 0xff;
<------>y_delta = (xy_delta >> REGISTER_LENGTH) & 0xff;
 
<------>/* Report the button event */
<------>input_report_key(input, BTN_LEFT, gesture);
 
<------>/* Report the deltas */
<------>input_report_rel(input, REL_X, x_delta);
<------>input_report_rel(input, REL_Y, -y_delta);
<------>input_sync(input);
 
<------>return xy_delta || gesture;
}
 
static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
{
<------>struct synaptics_i2c *touch = dev_id;
 
<------>mod_delayed_work(system_wq, &touch->dwork, 0);
 
<------>return IRQ_HANDLED;
}
 
static void synaptics_i2c_check_params(struct synaptics_i2c *touch)
{
<------>bool reset = false;
 
<------>if (scan_rate != touch->scan_rate_param)
<------><------>set_scan_rate(touch, scan_rate);
 
<------>if (no_decel != touch->no_decel_param) {
<------><------>touch->no_decel_param = no_decel;
<------><------>reset = true;
<------>}
 
<------>if (no_filter != touch->no_filter_param) {
<------><------>touch->no_filter_param = no_filter;
<------><------>reset = true;
<------>}
 
<------>if (reduce_report != touch->reduce_report_param) {
<------><------>touch->reduce_report_param = reduce_report;
<------><------>reset = true;
<------>}
 
<------>if (reset)
<------><------>synaptics_i2c_reset_config(touch->client);
}
 
/* Control the Device polling rate / Work Handler sleep time */
static unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch,
<------><------><------><------><------><------>bool have_data)
{
<------>unsigned long delay, nodata_count_thres;
 
<------>if (polling_req) {
<------><------>delay = touch->scan_ms;
<------><------>if (have_data) {
<------><------><------>touch->no_data_count = 0;
<------><------>} else {
<------><------><------>nodata_count_thres = NO_DATA_THRES / touch->scan_ms;
<------><------><------>if (touch->no_data_count < nodata_count_thres)
<------><------><------><------>touch->no_data_count++;
<------><------><------>else
<------><------><------><------>delay = NO_DATA_SLEEP_MSECS;
<------><------>}
<------><------>return msecs_to_jiffies(delay);
<------>} else {
<------><------>delay = msecs_to_jiffies(THREAD_IRQ_SLEEP_MSECS);
<------><------>return round_jiffies_relative(delay);
<------>}
}
 
/* Work Handler */
static void synaptics_i2c_work_handler(struct work_struct *work)
{
<------>bool have_data;
<------>struct synaptics_i2c *touch =
<------><------><------>container_of(work, struct synaptics_i2c, dwork.work);
<------>unsigned long delay;
 
<------>synaptics_i2c_check_params(touch);
 
<------>have_data = synaptics_i2c_get_input(touch);
<------>delay = synaptics_i2c_adjust_delay(touch, have_data);
 
<------>/*
<------> * While interrupt driven, there is no real need to poll the device.
<------> * But touchpads are very sensitive, so there could be errors
<------> * related to physical environment and the attention line isn't
<------> * necessarily asserted. In such case we can lose the touchpad.
<------> * We poll the device once in THREAD_IRQ_SLEEP_SECS and
<------> * if error is detected, we try to reset and reconfigure the touchpad.
<------> */
<------>mod_delayed_work(system_wq, &touch->dwork, delay);
}
 
static int synaptics_i2c_open(struct input_dev *input)
{
<------>struct synaptics_i2c *touch = input_get_drvdata(input);
<------>int ret;
 
<------>ret = synaptics_i2c_reset_config(touch->client);
<------>if (ret)
<------><------>return ret;
 
<------>if (polling_req)
<------><------>mod_delayed_work(system_wq, &touch->dwork,
<------><------><------><------>msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
 
<------>return 0;
}
 
static void synaptics_i2c_close(struct input_dev *input)
{
<------>struct synaptics_i2c *touch = input_get_drvdata(input);
 
<------>if (!polling_req)
<------><------>synaptics_i2c_reg_set(touch->client, INTERRUPT_EN_REG, 0);
 
<------>cancel_delayed_work_sync(&touch->dwork);
 
<------>/* Save some power */
<------>synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP);
}
 
static void synaptics_i2c_set_input_params(struct synaptics_i2c *touch)
{
<------>struct input_dev *input = touch->input;
 
<------>input->name = touch->client->name;
<------>input->phys = touch->client->adapter->name;
<------>input->id.bustype = BUS_I2C;
<------>input->id.version = synaptics_i2c_word_get(touch->client,
<------><------><------><------><------><------>   INFO_QUERY_REG0);
<------>input->dev.parent = &touch->client->dev;
<------>input->open = synaptics_i2c_open;
<------>input->close = synaptics_i2c_close;
<------>input_set_drvdata(input, touch);
 
<------>/* Register the device as mouse */
<------>__set_bit(EV_REL, input->evbit);
<------>__set_bit(REL_X, input->relbit);
<------>__set_bit(REL_Y, input->relbit);
 
<------>/* Register device's buttons and keys */
<------>__set_bit(EV_KEY, input->evbit);
<------>__set_bit(BTN_LEFT, input->keybit);
}
 
static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client)
{
<------>struct synaptics_i2c *touch;
 
<------>touch = kzalloc(sizeof(struct synaptics_i2c), GFP_KERNEL);
<------>if (!touch)
<------><------>return NULL;
 
<------>touch->client = client;
<------>touch->no_decel_param = no_decel;
<------>touch->scan_rate_param = scan_rate;
<------>set_scan_rate(touch, scan_rate);
<------>INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler);
 
<------>return touch;
}
 
static int synaptics_i2c_probe(struct i2c_client *client,
<------><------><------>       const struct i2c_device_id *dev_id)
{
<------>int ret;
<------>struct synaptics_i2c *touch;
 
<------>touch = synaptics_i2c_touch_create(client);
<------>if (!touch)
<------><------>return -ENOMEM;
 
<------>ret = synaptics_i2c_reset_config(client);
<------>if (ret)
<------><------>goto err_mem_free;
 
<------>if (client->irq < 1)
<------><------>polling_req = true;
 
<------>touch->input = input_allocate_device();
<------>if (!touch->input) {
<------><------>ret = -ENOMEM;
<------><------>goto err_mem_free;
<------>}
 
<------>synaptics_i2c_set_input_params(touch);
 
<------>if (!polling_req) {
<------><------>dev_dbg(&touch->client->dev,
<------><------><------> "Requesting IRQ: %d\n", touch->client->irq);
 
<------><------>ret = request_irq(touch->client->irq, synaptics_i2c_irq,
<------><------><------><------>  IRQ_TYPE_EDGE_FALLING,
<------><------><------><------>  DRIVER_NAME, touch);
<------><------>if (ret) {
<------><------><------>dev_warn(&touch->client->dev,
<------><------><------><------>  "IRQ request failed: %d, "
<------><------><------><------>  "falling back to polling\n", ret);
<------><------><------>polling_req = true;
<------><------><------>synaptics_i2c_reg_set(touch->client,
<------><------><------><------><------>      INTERRUPT_EN_REG, 0);
<------><------>}
<------>}
 
<------>if (polling_req)
<------><------>dev_dbg(&touch->client->dev,
<------><------><------> "Using polling at rate: %d times/sec\n", scan_rate);
 
<------>/* Register the device in input subsystem */
<------>ret = input_register_device(touch->input);
<------>if (ret) {
<------><------>dev_err(&client->dev,
<------><------><------> "Input device register failed: %d\n", ret);
<------><------>goto err_input_free;
<------>}
 
<------>i2c_set_clientdata(client, touch);
 
<------>return 0;
 
err_input_free:
<------>input_free_device(touch->input);
err_mem_free:
<------>kfree(touch);
 
<------>return ret;
}
 
static int synaptics_i2c_remove(struct i2c_client *client)
{
<------>struct synaptics_i2c *touch = i2c_get_clientdata(client);
 
<------>if (!polling_req)
<------><------>free_irq(client->irq, touch);
 
<------>input_unregister_device(touch->input);
<------>kfree(touch);
 
<------>return 0;
}
 
static int __maybe_unused synaptics_i2c_suspend(struct device *dev)
{
<------>struct i2c_client *client = to_i2c_client(dev);
<------>struct synaptics_i2c *touch = i2c_get_clientdata(client);
 
<------>cancel_delayed_work_sync(&touch->dwork);
 
<------>/* Save some power */
<------>synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP);
 
<------>return 0;
}
 
static int __maybe_unused synaptics_i2c_resume(struct device *dev)
{
<------>int ret;
<------>struct i2c_client *client = to_i2c_client(dev);
<------>struct synaptics_i2c *touch = i2c_get_clientdata(client);
 
<------>ret = synaptics_i2c_reset_config(client);
<------>if (ret)
<------><------>return ret;
 
<------>mod_delayed_work(system_wq, &touch->dwork,
<------><------><------><------>msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
 
<------>return 0;
}
 
static SIMPLE_DEV_PM_OPS(synaptics_i2c_pm, synaptics_i2c_suspend,
<------><------><------> synaptics_i2c_resume);
 
static const struct i2c_device_id synaptics_i2c_id_table[] = {
<------>{ "synaptics_i2c", 0 },
<------>{ },
};
MODULE_DEVICE_TABLE(i2c, synaptics_i2c_id_table);
 
#ifdef CONFIG_OF
static const struct of_device_id synaptics_i2c_of_match[] = {
<------>{ .compatible = "synaptics,synaptics_i2c", },
<------>{ },
};
MODULE_DEVICE_TABLE(of, synaptics_i2c_of_match);
#endif
 
static struct i2c_driver synaptics_i2c_driver = {
<------>.driver = {
<------><------>.name	= DRIVER_NAME,
<------><------>.of_match_table = of_match_ptr(synaptics_i2c_of_match),
<------><------>.pm	= &synaptics_i2c_pm,
<------>},
 
<------>.probe		= synaptics_i2c_probe,
<------>.remove		= synaptics_i2c_remove,
 
<------>.id_table	= synaptics_i2c_id_table,
};
 
module_i2c_driver(synaptics_i2c_driver);
 
MODULE_DESCRIPTION("Synaptics I2C touchpad driver");
MODULE_AUTHOR("Mike Rapoport, Igor Grinberg, Compulab");
MODULE_LICENSE("GPL");