| |
| |
| |
| |
| |
| |
| |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/console.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_irq.h> |
| #include <drm/drm_modeset_helper.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_vblank.h> |
| |
| #include "fsl_dcu_drm_crtc.h" |
| #include "fsl_dcu_drm_drv.h" |
| #include "fsl_tcon.h" |
| |
| static int legacyfb_depth = 24; |
| module_param(legacyfb_depth, int, 0444); |
| |
| static bool fsl_dcu_drm_is_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| <------>if (reg == DCU_INT_STATUS || reg == DCU_UPDATE_MODE) |
| <------><------>return true; |
| |
| <------>return false; |
| } |
| |
| static const struct regmap_config fsl_dcu_regmap_config = { |
| <------>.reg_bits = 32, |
| <------>.reg_stride = 4, |
| <------>.val_bits = 32, |
| |
| <------>.volatile_reg = fsl_dcu_drm_is_volatile_reg, |
| }; |
| |
| static void fsl_dcu_irq_uninstall(struct drm_device *dev) |
| { |
| <------>struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; |
| |
| <------>regmap_write(fsl_dev->regmap, DCU_INT_STATUS, ~0); |
| <------>regmap_write(fsl_dev->regmap, DCU_INT_MASK, ~0); |
| } |
| |
| static int fsl_dcu_load(struct drm_device *dev, unsigned long flags) |
| { |
| <------>struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; |
| <------>int ret; |
| |
| <------>ret = fsl_dcu_drm_modeset_init(fsl_dev); |
| <------>if (ret < 0) { |
| <------><------>dev_err(dev->dev, "failed to initialize mode setting\n"); |
| <------><------>return ret; |
| <------>} |
| |
| <------>ret = drm_vblank_init(dev, dev->mode_config.num_crtc); |
| <------>if (ret < 0) { |
| <------><------>dev_err(dev->dev, "failed to initialize vblank\n"); |
| <------><------>goto done; |
| <------>} |
| |
| <------>ret = drm_irq_install(dev, fsl_dev->irq); |
| <------>if (ret < 0) { |
| <------><------>dev_err(dev->dev, "failed to install IRQ handler\n"); |
| <------><------>goto done; |
| <------>} |
| |
| <------>if (legacyfb_depth != 16 && legacyfb_depth != 24 && |
| <------> legacyfb_depth != 32) { |
| <------><------>dev_warn(dev->dev, |
| <------><------><------>"Invalid legacyfb_depth. Defaulting to 24bpp\n"); |
| <------><------>legacyfb_depth = 24; |
| <------>} |
| |
| <------>return 0; |
| done: |
| <------>drm_kms_helper_poll_fini(dev); |
| |
| <------>drm_mode_config_cleanup(dev); |
| <------>drm_irq_uninstall(dev); |
| <------>dev->dev_private = NULL; |
| |
| <------>return ret; |
| } |
| |
| static void fsl_dcu_unload(struct drm_device *dev) |
| { |
| <------>drm_atomic_helper_shutdown(dev); |
| <------>drm_kms_helper_poll_fini(dev); |
| |
| <------>drm_mode_config_cleanup(dev); |
| <------>drm_irq_uninstall(dev); |
| |
| <------>dev->dev_private = NULL; |
| } |
| |
| static irqreturn_t fsl_dcu_drm_irq(int irq, void *arg) |
| { |
| <------>struct drm_device *dev = arg; |
| <------>struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; |
| <------>unsigned int int_status; |
| <------>int ret; |
| |
| <------>ret = regmap_read(fsl_dev->regmap, DCU_INT_STATUS, &int_status); |
| <------>if (ret) { |
| <------><------>dev_err(dev->dev, "read DCU_INT_STATUS failed\n"); |
| <------><------>return IRQ_NONE; |
| <------>} |
| |
| <------>if (int_status & DCU_INT_STATUS_VBLANK) |
| <------><------>drm_handle_vblank(dev, 0); |
| |
| <------>regmap_write(fsl_dev->regmap, DCU_INT_STATUS, int_status); |
| |
| <------>return IRQ_HANDLED; |
| } |
| |
| DEFINE_DRM_GEM_CMA_FOPS(fsl_dcu_drm_fops); |
| |
| static struct drm_driver fsl_dcu_drm_driver = { |
| <------>.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, |
| <------>.load = fsl_dcu_load, |
| <------>.unload = fsl_dcu_unload, |
| <------>.irq_handler = fsl_dcu_drm_irq, |
| <------>.irq_preinstall = fsl_dcu_irq_uninstall, |
| <------>.irq_uninstall = fsl_dcu_irq_uninstall, |
| <------>DRM_GEM_CMA_DRIVER_OPS, |
| <------>.fops = &fsl_dcu_drm_fops, |
| <------>.name = "fsl-dcu-drm", |
| <------>.desc = "Freescale DCU DRM", |
| <------>.date = "20160425", |
| <------>.major = 1, |
| <------>.minor = 1, |
| }; |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int fsl_dcu_drm_pm_suspend(struct device *dev) |
| { |
| <------>struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev); |
| <------>int ret; |
| |
| <------>if (!fsl_dev) |
| <------><------>return 0; |
| |
| <------>disable_irq(fsl_dev->irq); |
| |
| <------>ret = drm_mode_config_helper_suspend(fsl_dev->drm); |
| <------>if (ret) { |
| <------><------>enable_irq(fsl_dev->irq); |
| <------><------>return ret; |
| <------>} |
| |
| <------>clk_disable_unprepare(fsl_dev->clk); |
| |
| <------>return 0; |
| } |
| |
| static int fsl_dcu_drm_pm_resume(struct device *dev) |
| { |
| <------>struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev); |
| <------>int ret; |
| |
| <------>if (!fsl_dev) |
| <------><------>return 0; |
| |
| <------>ret = clk_prepare_enable(fsl_dev->clk); |
| <------>if (ret < 0) { |
| <------><------>dev_err(dev, "failed to enable dcu clk\n"); |
| <------><------>return ret; |
| <------>} |
| |
| <------>if (fsl_dev->tcon) |
| <------><------>fsl_tcon_bypass_enable(fsl_dev->tcon); |
| <------>fsl_dcu_drm_init_planes(fsl_dev->drm); |
| <------>enable_irq(fsl_dev->irq); |
| |
| <------>drm_mode_config_helper_resume(fsl_dev->drm); |
| |
| <------>return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops fsl_dcu_drm_pm_ops = { |
| <------>SET_SYSTEM_SLEEP_PM_OPS(fsl_dcu_drm_pm_suspend, fsl_dcu_drm_pm_resume) |
| }; |
| |
| static const struct fsl_dcu_soc_data fsl_dcu_ls1021a_data = { |
| <------>.name = "ls1021a", |
| <------>.total_layer = 16, |
| <------>.max_layer = 4, |
| <------>.layer_regs = LS1021A_LAYER_REG_NUM, |
| }; |
| |
| static const struct fsl_dcu_soc_data fsl_dcu_vf610_data = { |
| <------>.name = "vf610", |
| <------>.total_layer = 64, |
| <------>.max_layer = 6, |
| <------>.layer_regs = VF610_LAYER_REG_NUM, |
| }; |
| |
| static const struct of_device_id fsl_dcu_of_match[] = { |
| <------>{ |
| <------><------>.compatible = "fsl,ls1021a-dcu", |
| <------><------>.data = &fsl_dcu_ls1021a_data, |
| <------>}, { |
| <------><------>.compatible = "fsl,vf610-dcu", |
| <------><------>.data = &fsl_dcu_vf610_data, |
| <------>}, { |
| <------>}, |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_dcu_of_match); |
| |
| static int fsl_dcu_drm_probe(struct platform_device *pdev) |
| { |
| <------>struct fsl_dcu_drm_device *fsl_dev; |
| <------>struct drm_device *drm; |
| <------>struct device *dev = &pdev->dev; |
| <------>struct resource *res; |
| <------>void __iomem *base; |
| <------>struct drm_driver *driver = &fsl_dcu_drm_driver; |
| <------>struct clk *pix_clk_in; |
| <------>char pix_clk_name[32]; |
| <------>const char *pix_clk_in_name; |
| <------>const struct of_device_id *id; |
| <------>int ret; |
| <------>u8 div_ratio_shift = 0; |
| |
| <------>fsl_dev = devm_kzalloc(dev, sizeof(*fsl_dev), GFP_KERNEL); |
| <------>if (!fsl_dev) |
| <------><------>return -ENOMEM; |
| |
| <------>id = of_match_node(fsl_dcu_of_match, pdev->dev.of_node); |
| <------>if (!id) |
| <------><------>return -ENODEV; |
| <------>fsl_dev->soc = id->data; |
| |
| <------>res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| <------>base = devm_ioremap_resource(dev, res); |
| <------>if (IS_ERR(base)) { |
| <------><------>ret = PTR_ERR(base); |
| <------><------>return ret; |
| <------>} |
| |
| <------>fsl_dev->irq = platform_get_irq(pdev, 0); |
| <------>if (fsl_dev->irq < 0) { |
| <------><------>dev_err(dev, "failed to get irq\n"); |
| <------><------>return fsl_dev->irq; |
| <------>} |
| |
| <------>fsl_dev->regmap = devm_regmap_init_mmio(dev, base, |
| <------><------><------>&fsl_dcu_regmap_config); |
| <------>if (IS_ERR(fsl_dev->regmap)) { |
| <------><------>dev_err(dev, "regmap init failed\n"); |
| <------><------>return PTR_ERR(fsl_dev->regmap); |
| <------>} |
| |
| <------>fsl_dev->clk = devm_clk_get(dev, "dcu"); |
| <------>if (IS_ERR(fsl_dev->clk)) { |
| <------><------>dev_err(dev, "failed to get dcu clock\n"); |
| <------><------>return PTR_ERR(fsl_dev->clk); |
| <------>} |
| <------>ret = clk_prepare_enable(fsl_dev->clk); |
| <------>if (ret < 0) { |
| <------><------>dev_err(dev, "failed to enable dcu clk\n"); |
| <------><------>return ret; |
| <------>} |
| |
| <------>pix_clk_in = devm_clk_get(dev, "pix"); |
| <------>if (IS_ERR(pix_clk_in)) { |
| <------><------> |
| <------><------>pix_clk_in = fsl_dev->clk; |
| <------>} |
| |
| <------>if (of_property_read_bool(dev->of_node, "big-endian")) |
| <------><------>div_ratio_shift = 24; |
| |
| <------>pix_clk_in_name = __clk_get_name(pix_clk_in); |
| <------>snprintf(pix_clk_name, sizeof(pix_clk_name), "%s_pix", pix_clk_in_name); |
| <------>fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name, |
| <------><------><------>pix_clk_in_name, 0, base + DCU_DIV_RATIO, |
| <------><------><------>div_ratio_shift, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL); |
| <------>if (IS_ERR(fsl_dev->pix_clk)) { |
| <------><------>dev_err(dev, "failed to register pix clk\n"); |
| <------><------>ret = PTR_ERR(fsl_dev->pix_clk); |
| <------><------>goto disable_clk; |
| <------>} |
| |
| <------>fsl_dev->tcon = fsl_tcon_init(dev); |
| |
| <------>drm = drm_dev_alloc(driver, dev); |
| <------>if (IS_ERR(drm)) { |
| <------><------>ret = PTR_ERR(drm); |
| <------><------>goto unregister_pix_clk; |
| <------>} |
| |
| <------>fsl_dev->dev = dev; |
| <------>fsl_dev->drm = drm; |
| <------>fsl_dev->np = dev->of_node; |
| <------>drm->dev_private = fsl_dev; |
| <------>dev_set_drvdata(dev, fsl_dev); |
| |
| <------>ret = drm_dev_register(drm, 0); |
| <------>if (ret < 0) |
| <------><------>goto put; |
| |
| <------>drm_fbdev_generic_setup(drm, legacyfb_depth); |
| |
| <------>return 0; |
| |
| put: |
| <------>drm_dev_put(drm); |
| unregister_pix_clk: |
| <------>clk_unregister(fsl_dev->pix_clk); |
| disable_clk: |
| <------>clk_disable_unprepare(fsl_dev->clk); |
| <------>return ret; |
| } |
| |
| static int fsl_dcu_drm_remove(struct platform_device *pdev) |
| { |
| <------>struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev); |
| |
| <------>drm_dev_unregister(fsl_dev->drm); |
| <------>drm_dev_put(fsl_dev->drm); |
| <------>clk_disable_unprepare(fsl_dev->clk); |
| <------>clk_unregister(fsl_dev->pix_clk); |
| |
| <------>return 0; |
| } |
| |
| static struct platform_driver fsl_dcu_drm_platform_driver = { |
| <------>.probe = fsl_dcu_drm_probe, |
| <------>.remove = fsl_dcu_drm_remove, |
| <------>.driver = { |
| <------><------>.name = "fsl-dcu", |
| <------><------>.pm = &fsl_dcu_drm_pm_ops, |
| <------><------>.of_match_table = fsl_dcu_of_match, |
| <------>}, |
| }; |
| |
| module_platform_driver(fsl_dcu_drm_platform_driver); |
| |
| MODULE_DESCRIPTION("Freescale DCU DRM Driver"); |
| MODULE_LICENSE("GPL"); |
| |