Orange Pi5 kernel

/*
 * Copyright (c) 2006-2008 Intel Corporation
 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
 *
 * DRM core CRTC related functions
 *
 * Permission to use, copy, modify, distribute, and sell this software and its
 * documentation for any purpose is hereby granted without fee, provided that
 * the above copyright notice appear in all copies and that both that copyright
 * notice and this permission notice appear in supporting documentation, and
 * that the name of the copyright holders not be used in advertising or
 * publicity pertaining to distribution of the software without specific,
 * written prior permission.  The copyright holders make no representations
 * about the suitability of this software for any purpose.  It is provided "as
 * is" without express or implied warranty.
 *
 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 * OF THIS SOFTWARE.
 *
 * Authors:
 *      Keith Packard
 *	Eric Anholt <eric@anholt.net>
 *      Dave Airlie <airlied@linux.ie>
 *      Jesse Barnes <jesse.barnes@intel.com>
 */
 
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
 
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_atomic_uapi.h>
#include <drm/drm_bridge.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_edid.h>
#include <drm/drm_encoder.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_print.h>
#include <drm/drm_vblank.h>
 
#include "drm_crtc_helper_internal.h"
 
/**
 * DOC: overview
 *
 * The CRTC modeset helper library provides a default set_config implementation
 * in drm_crtc_helper_set_config(). Plus a few other convenience functions using
 * the same callbacks which drivers can use to e.g. restore the modeset
 * configuration on resume with drm_helper_resume_force_mode().
 *
 * Note that this helper library doesn't track the current power state of CRTCs
 * and encoders. It can call callbacks like &drm_encoder_helper_funcs.dpms even
 * though the hardware is already in the desired state. This deficiency has been
 * fixed in the atomic helpers.
 *
 * The driver callbacks are mostly compatible with the atomic modeset helpers,
 * except for the handling of the primary plane: Atomic helpers require that the
 * primary plane is implemented as a real standalone plane and not directly tied
 * to the CRTC state. For easier transition this library provides functions to
 * implement the old semantics required by the CRTC helpers using the new plane
 * and atomic helper callbacks.
 *
 * Drivers are strongly urged to convert to the atomic helpers (by way of first
 * converting to the plane helpers). New drivers must not use these functions
 * but need to implement the atomic interface instead, potentially using the
 * atomic helpers for that.
 *
 * These legacy modeset helpers use the same function table structures as
 * all other modesetting helpers. See the documentation for struct
 * &drm_crtc_helper_funcs, &struct drm_encoder_helper_funcs and struct
 * &drm_connector_helper_funcs.
 */
 
/**
 * drm_helper_encoder_in_use - check if a given encoder is in use
 * @encoder: encoder to check
 *
 * Checks whether @encoder is with the current mode setting output configuration
 * in use by any connector. This doesn't mean that it is actually enabled since
 * the DPMS state is tracked separately.
 *
 * Returns:
 * True if @encoder is used, false otherwise.
 */
bool drm_helper_encoder_in_use(struct drm_encoder *encoder)
{
<------>struct drm_connector *connector;
<------>struct drm_connector_list_iter conn_iter;
<------>struct drm_device *dev = encoder->dev;
 
<------>WARN_ON(drm_drv_uses_atomic_modeset(dev));
 
<------>/*
<------> * We can expect this mutex to be locked if we are not panicking.
<------> * Locking is currently fubar in the panic handler.
<------> */
<------>if (!oops_in_progress) {
<------><------>WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
<------><------>WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
<------>}
 
 
<------>drm_connector_list_iter_begin(dev, &conn_iter);
<------>drm_for_each_connector_iter(connector, &conn_iter) {
<------><------>if (connector->encoder == encoder) {
<------><------><------>drm_connector_list_iter_end(&conn_iter);
<------><------><------>return true;
<------><------>}
<------>}
<------>drm_connector_list_iter_end(&conn_iter);
<------>return false;
}
EXPORT_SYMBOL(drm_helper_encoder_in_use);
 
/**
 * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
 * @crtc: CRTC to check
 *
 * Checks whether @crtc is with the current mode setting output configuration
 * in use by any connector. This doesn't mean that it is actually enabled since
 * the DPMS state is tracked separately.
 *
 * Returns:
 * True if @crtc is used, false otherwise.
 */
bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
{
<------>struct drm_encoder *encoder;
<------>struct drm_device *dev = crtc->dev;
 
<------>WARN_ON(drm_drv_uses_atomic_modeset(dev));
 
<------>/*
<------> * We can expect this mutex to be locked if we are not panicking.
<------> * Locking is currently fubar in the panic handler.
<------> */
<------>if (!oops_in_progress)
<------><------>WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
 
<------>drm_for_each_encoder(encoder, dev)
<------><------>if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder))
<------><------><------>return true;
<------>return false;
}
EXPORT_SYMBOL(drm_helper_crtc_in_use);
 
static void
drm_encoder_disable(struct drm_encoder *encoder)
{
<------>const struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
 
<------>if (!encoder_funcs)
<------><------>return;
 
<------>if (encoder_funcs->disable)
<------><------>(*encoder_funcs->disable)(encoder);
<------>else if (encoder_funcs->dpms)
<------><------>(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
}
 
static void __drm_helper_disable_unused_functions(struct drm_device *dev)
{
<------>struct drm_encoder *encoder;
<------>struct drm_crtc *crtc;
 
<------>drm_warn_on_modeset_not_all_locked(dev);
 
<------>drm_for_each_encoder(encoder, dev) {
<------><------>if (!drm_helper_encoder_in_use(encoder)) {
<------><------><------>drm_encoder_disable(encoder);
<------><------><------>/* disconnect encoder from any connector */
<------><------><------>encoder->crtc = NULL;
<------><------>}
<------>}
 
<------>drm_for_each_crtc(crtc, dev) {
<------><------>const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 
<------><------>crtc->enabled = drm_helper_crtc_in_use(crtc);
<------><------>if (!crtc->enabled) {
<------><------><------>if (crtc_funcs->disable)
<------><------><------><------>(*crtc_funcs->disable)(crtc);
<------><------><------>else
<------><------><------><------>(*crtc_funcs->dpms)(crtc, DRM_MODE_DPMS_OFF);
<------><------><------>crtc->primary->fb = NULL;
<------><------>}
<------>}
}
 
/**
 * drm_helper_disable_unused_functions - disable unused objects
 * @dev: DRM device
 *
 * This function walks through the entire mode setting configuration of @dev. It
 * will remove any CRTC links of unused encoders and encoder links of
 * disconnected connectors. Then it will disable all unused encoders and CRTCs
 * either by calling their disable callback if available or by calling their
 * dpms callback with DRM_MODE_DPMS_OFF.
 *
 * NOTE:
 *
 * This function is part of the legacy modeset helper library and will cause
 * major confusion with atomic drivers. This is because atomic helpers guarantee
 * to never call ->disable() hooks on a disabled function, or ->enable() hooks
 * on an enabled functions. drm_helper_disable_unused_functions() on the other
 * hand throws such guarantees into the wind and calls disable hooks
 * unconditionally on unused functions.
 */
void drm_helper_disable_unused_functions(struct drm_device *dev)
{
<------>WARN_ON(drm_drv_uses_atomic_modeset(dev));
 
<------>drm_modeset_lock_all(dev);
<------>__drm_helper_disable_unused_functions(dev);
<------>drm_modeset_unlock_all(dev);
}
EXPORT_SYMBOL(drm_helper_disable_unused_functions);
 
/*
 * Check the CRTC we're going to map each output to vs. its current
 * CRTC.  If they don't match, we have to disable the output and the CRTC
 * since the driver will have to re-route things.
 */
static void
drm_crtc_prepare_encoders(struct drm_device *dev)
{
<------>const struct drm_encoder_helper_funcs *encoder_funcs;
<------>struct drm_encoder *encoder;
 
<------>drm_for_each_encoder(encoder, dev) {
<------><------>encoder_funcs = encoder->helper_private;
<------><------>if (!encoder_funcs)
<------><------><------>continue;
 
<------><------>/* Disable unused encoders */
<------><------>if (encoder->crtc == NULL)
<------><------><------>drm_encoder_disable(encoder);
<------>}
}
 
/**
 * drm_crtc_helper_set_mode - internal helper to set a mode
 * @crtc: CRTC to program
 * @mode: mode to use
 * @x: horizontal offset into the surface
 * @y: vertical offset into the surface
 * @old_fb: old framebuffer, for cleanup
 *
 * Try to set @mode on @crtc.  Give @crtc and its associated connectors a chance
 * to fixup or reject the mode prior to trying to set it. This is an internal
 * helper that drivers could e.g. use to update properties that require the
 * entire output pipe to be disabled and re-enabled in a new configuration. For
 * example for changing whether audio is enabled on a hdmi link or for changing
 * panel fitter or dither attributes. It is also called by the
 * drm_crtc_helper_set_config() helper function to drive the mode setting
 * sequence.
 *
 * Returns:
 * True if the mode was set successfully, false otherwise.
 */
bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
<------><------><------>      struct drm_display_mode *mode,
<------><------><------>      int x, int y,
<------><------><------>      struct drm_framebuffer *old_fb)
{
<------>struct drm_device *dev = crtc->dev;
<------>struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
<------>const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
<------>const struct drm_encoder_helper_funcs *encoder_funcs;
<------>int saved_x, saved_y;
<------>bool saved_enabled;
<------>struct drm_encoder *encoder;
<------>bool ret = true;
 
<------>WARN_ON(drm_drv_uses_atomic_modeset(dev));
 
<------>drm_warn_on_modeset_not_all_locked(dev);
 
<------>saved_enabled = crtc->enabled;
<------>crtc->enabled = drm_helper_crtc_in_use(crtc);
<------>if (!crtc->enabled)
<------><------>return true;
 
<------>adjusted_mode = drm_mode_duplicate(dev, mode);
<------>if (!adjusted_mode) {
<------><------>crtc->enabled = saved_enabled;
<------><------>return false;
<------>}
 
<------>saved_mode = crtc->mode;
<------>saved_hwmode = crtc->hwmode;
<------>saved_x = crtc->x;
<------>saved_y = crtc->y;
 
<------>/* Update crtc values up front so the driver can rely on them for mode
<------> * setting.
<------> */
<------>crtc->mode = *mode;
<------>crtc->x = x;
<------>crtc->y = y;
 
<------>/* Pass our mode to the connectors and the CRTC to give them a chance to
<------> * adjust it according to limitations or connector properties, and also
<------> * a chance to reject the mode entirely.
<------> */
<------>drm_for_each_encoder(encoder, dev) {
 
<------><------>if (encoder->crtc != crtc)
<------><------><------>continue;
 
<------><------>encoder_funcs = encoder->helper_private;
<------><------>if (!encoder_funcs)
<------><------><------>continue;
 
<------><------>encoder_funcs = encoder->helper_private;
<------><------>if (encoder_funcs->mode_fixup) {
<------><------><------>if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
<------><------><------><------><------><------><------>      adjusted_mode))) {
<------><------><------><------>DRM_DEBUG_KMS("Encoder fixup failed\n");
<------><------><------><------>goto done;
<------><------><------>}
<------><------>}
<------>}
 
<------>if (crtc_funcs->mode_fixup) {
<------><------>if (!(ret = crtc_funcs->mode_fixup(crtc, mode,
<------><------><------><------><------><------>adjusted_mode))) {
<------><------><------>DRM_DEBUG_KMS("CRTC fixup failed\n");
<------><------><------>goto done;
<------><------>}
<------>}
<------>DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
 
<------>crtc->hwmode = *adjusted_mode;
 
<------>/* Prepare the encoders and CRTCs before setting the mode. */
<------>drm_for_each_encoder(encoder, dev) {
 
<------><------>if (encoder->crtc != crtc)
<------><------><------>continue;
 
<------><------>encoder_funcs = encoder->helper_private;
<------><------>if (!encoder_funcs)
<------><------><------>continue;
 
<------><------>/* Disable the encoders as the first thing we do. */
<------><------>if (encoder_funcs->prepare)
<------><------><------>encoder_funcs->prepare(encoder);
<------>}
 
<------>drm_crtc_prepare_encoders(dev);
 
<------>crtc_funcs->prepare(crtc);
 
<------>/* Set up the DPLL and any encoders state that needs to adjust or depend
<------> * on the DPLL.
<------> */
<------>ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
<------>if (!ret)
<------>    goto done;
 
<------>drm_for_each_encoder(encoder, dev) {
 
<------><------>if (encoder->crtc != crtc)
<------><------><------>continue;
 
<------><------>encoder_funcs = encoder->helper_private;
<------><------>if (!encoder_funcs)
<------><------><------>continue;
 
<------><------>DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%s]\n",
<------><------><------>encoder->base.id, encoder->name, mode->name);
<------><------>if (encoder_funcs->mode_set)
<------><------><------>encoder_funcs->mode_set(encoder, mode, adjusted_mode);
<------>}
 
<------>/* Now enable the clocks, plane, pipe, and connectors that we set up. */
<------>crtc_funcs->commit(crtc);
 
<------>drm_for_each_encoder(encoder, dev) {
 
<------><------>if (encoder->crtc != crtc)
<------><------><------>continue;
 
<------><------>encoder_funcs = encoder->helper_private;
<------><------>if (!encoder_funcs)
<------><------><------>continue;
 
<------><------>if (encoder_funcs->commit)
<------><------><------>encoder_funcs->commit(encoder);
<------>}
 
<------>/* Calculate and store various constants which
<------> * are later needed by vblank and swap-completion
<------> * timestamping. They are derived from true hwmode.
<------> */
<------>drm_calc_timestamping_constants(crtc, &crtc->hwmode);
 
<------>/* FIXME: add subpixel order */
done:
<------>drm_mode_destroy(dev, adjusted_mode);
<------>if (!ret) {
<------><------>crtc->enabled = saved_enabled;
<------><------>crtc->mode = saved_mode;
<------><------>crtc->hwmode = saved_hwmode;
<------><------>crtc->x = saved_x;
<------><------>crtc->y = saved_y;
<------>}
 
<------>return ret;
}
EXPORT_SYMBOL(drm_crtc_helper_set_mode);
 
static void
drm_crtc_helper_disable(struct drm_crtc *crtc)
{
<------>struct drm_device *dev = crtc->dev;
<------>struct drm_connector *connector;
<------>struct drm_encoder *encoder;
 
<------>/* Decouple all encoders and their attached connectors from this crtc */
<------>drm_for_each_encoder(encoder, dev) {
<------><------>struct drm_connector_list_iter conn_iter;
 
<------><------>if (encoder->crtc != crtc)
<------><------><------>continue;
 
<------><------>drm_connector_list_iter_begin(dev, &conn_iter);
<------><------>drm_for_each_connector_iter(connector, &conn_iter) {
<------><------><------>if (connector->encoder != encoder)
<------><------><------><------>continue;
 
<------><------><------>connector->encoder = NULL;
 
<------><------><------>/*
<------><------><------> * drm_helper_disable_unused_functions() ought to be
<------><------><------> * doing this, but since we've decoupled the encoder
<------><------><------> * from the connector above, the required connection
<------><------><------> * between them is henceforth no longer available.
<------><------><------> */
<------><------><------>connector->dpms = DRM_MODE_DPMS_OFF;
 
<------><------><------>/* we keep a reference while the encoder is bound */
<------><------><------>drm_connector_put(connector);
<------><------>}
<------><------>drm_connector_list_iter_end(&conn_iter);
<------>}
 
<------>__drm_helper_disable_unused_functions(dev);
}
 
/*
 * For connectors that support multiple encoders, either the
 * .atomic_best_encoder() or .best_encoder() operation must be implemented.
 */
struct drm_encoder *
drm_connector_get_single_encoder(struct drm_connector *connector)
{
<------>struct drm_encoder *encoder;
 
<------>WARN_ON(hweight32(connector->possible_encoders) > 1);
<------>drm_connector_for_each_possible_encoder(connector, encoder)
<------><------>return encoder;
 
<------>return NULL;
}
 
/**
 * drm_crtc_helper_set_config - set a new config from userspace
 * @set: mode set configuration
 * @ctx: lock acquire context, not used here
 *
 * The drm_crtc_helper_set_config() helper function implements the of
 * &drm_crtc_funcs.set_config callback for drivers using the legacy CRTC
 * helpers.
 *
 * It first tries to locate the best encoder for each connector by calling the
 * connector @drm_connector_helper_funcs.best_encoder helper operation.
 *
 * After locating the appropriate encoders, the helper function will call the
 * mode_fixup encoder and CRTC helper operations to adjust the requested mode,
 * or reject it completely in which case an error will be returned to the
 * application. If the new configuration after mode adjustment is identical to
 * the current configuration the helper function will return without performing
 * any other operation.
 *
 * If the adjusted mode is identical to the current mode but changes to the
 * frame buffer need to be applied, the drm_crtc_helper_set_config() function
 * will call the CRTC &drm_crtc_helper_funcs.mode_set_base helper operation.
 *
 * If the adjusted mode differs from the current mode, or if the
 * ->mode_set_base() helper operation is not provided, the helper function
 * performs a full mode set sequence by calling the ->prepare(), ->mode_set()
 * and ->commit() CRTC and encoder helper operations, in that order.
 * Alternatively it can also use the dpms and disable helper operations. For
 * details see &struct drm_crtc_helper_funcs and struct
 * &drm_encoder_helper_funcs.
 *
 * This function is deprecated.  New drivers must implement atomic modeset
 * support, for which this function is unsuitable. Instead drivers should use
 * drm_atomic_helper_set_config().
 *
 * Returns:
 * Returns 0 on success, negative errno numbers on failure.
 */
int drm_crtc_helper_set_config(struct drm_mode_set *set,
<------><------><------>       struct drm_modeset_acquire_ctx *ctx)
{
<------>struct drm_device *dev;
<------>struct drm_crtc **save_encoder_crtcs, *new_crtc;
<------>struct drm_encoder **save_connector_encoders, *new_encoder, *encoder;
<------>bool mode_changed = false; /* if true do a full mode set */
<------>bool fb_changed = false; /* if true and !mode_changed just do a flip */
<------>struct drm_connector *connector;
<------>struct drm_connector_list_iter conn_iter;
<------>int count = 0, ro, fail = 0;
<------>const struct drm_crtc_helper_funcs *crtc_funcs;
<------>struct drm_mode_set save_set;
<------>int ret;
<------>int i;
 
<------>DRM_DEBUG_KMS("\n");
 
<------>BUG_ON(!set);
<------>BUG_ON(!set->crtc);
<------>BUG_ON(!set->crtc->helper_private);
 
<------>/* Enforce sane interface api - has been abused by the fb helper. */
<------>BUG_ON(!set->mode && set->fb);
<------>BUG_ON(set->fb && set->num_connectors == 0);
 
<------>crtc_funcs = set->crtc->helper_private;
 
<------>dev = set->crtc->dev;
<------>WARN_ON(drm_drv_uses_atomic_modeset(dev));
 
<------>if (!set->mode)
<------><------>set->fb = NULL;
 
<------>if (set->fb) {
<------><------>DRM_DEBUG_KMS("[CRTC:%d:%s] [FB:%d] #connectors=%d (x y) (%i %i)\n",
<------><------><------>      set->crtc->base.id, set->crtc->name,
<------><------><------>      set->fb->base.id,
<------><------><------>      (int)set->num_connectors, set->x, set->y);
<------>} else {
<------><------>DRM_DEBUG_KMS("[CRTC:%d:%s] [NOFB]\n",
<------><------><------>      set->crtc->base.id, set->crtc->name);
<------><------>drm_crtc_helper_disable(set->crtc);
<------><------>return 0;
<------>}
 
<------>drm_warn_on_modeset_not_all_locked(dev);
 
<------>/*
<------> * Allocate space for the backup of all (non-pointer) encoder and
<------> * connector data.
<------> */
<------>save_encoder_crtcs = kcalloc(dev->mode_config.num_encoder,
<------><------><------><------>sizeof(struct drm_crtc *), GFP_KERNEL);
<------>if (!save_encoder_crtcs)
<------><------>return -ENOMEM;
 
<------>save_connector_encoders = kcalloc(dev->mode_config.num_connector,
<------><------><------><------>sizeof(struct drm_encoder *), GFP_KERNEL);
<------>if (!save_connector_encoders) {
<------><------>kfree(save_encoder_crtcs);
<------><------>return -ENOMEM;
<------>}
 
<------>/*
<------> * Copy data. Note that driver private data is not affected.
<------> * Should anything bad happen only the expected state is
<------> * restored, not the drivers personal bookkeeping.
<------> */
<------>count = 0;
<------>drm_for_each_encoder(encoder, dev) {
<------><------>save_encoder_crtcs[count++] = encoder->crtc;
<------>}
 
<------>count = 0;
<------>drm_connector_list_iter_begin(dev, &conn_iter);
<------>drm_for_each_connector_iter(connector, &conn_iter)
<------><------>save_connector_encoders[count++] = connector->encoder;
<------>drm_connector_list_iter_end(&conn_iter);
 
<------>save_set.crtc = set->crtc;
<------>save_set.mode = &set->crtc->mode;
<------>save_set.x = set->crtc->x;
<------>save_set.y = set->crtc->y;
<------>save_set.fb = set->crtc->primary->fb;
 
<------>/* We should be able to check here if the fb has the same properties
<------> * and then just flip_or_move it */
<------>if (set->crtc->primary->fb != set->fb) {
<------><------>/* If we have no fb then treat it as a full mode set */
<------><------>if (set->crtc->primary->fb == NULL) {
<------><------><------>DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
<------><------><------>mode_changed = true;
<------><------>} else if (set->fb->format != set->crtc->primary->fb->format) {
<------><------><------>mode_changed = true;
<------><------>} else
<------><------><------>fb_changed = true;
<------>}
 
<------>if (set->x != set->crtc->x || set->y != set->crtc->y)
<------><------>fb_changed = true;
 
<------>if (!drm_mode_equal(set->mode, &set->crtc->mode)) {
<------><------>DRM_DEBUG_KMS("modes are different, full mode set\n");
<------><------>drm_mode_debug_printmodeline(&set->crtc->mode);
<------><------>drm_mode_debug_printmodeline(set->mode);
<------><------>mode_changed = true;
<------>}
 
<------>/* take a reference on all unbound connectors in set, reuse the
<------> * already taken reference for bound connectors
<------> */
<------>for (ro = 0; ro < set->num_connectors; ro++) {
<------><------>if (set->connectors[ro]->encoder)
<------><------><------>continue;
<------><------>drm_connector_get(set->connectors[ro]);
<------>}
 
<------>/* a) traverse passed in connector list and get encoders for them */
<------>count = 0;
<------>drm_connector_list_iter_begin(dev, &conn_iter);
<------>drm_for_each_connector_iter(connector, &conn_iter) {
<------><------>const struct drm_connector_helper_funcs *connector_funcs =
<------><------><------>connector->helper_private;
<------><------>new_encoder = connector->encoder;
<------><------>for (ro = 0; ro < set->num_connectors; ro++) {
<------><------><------>if (set->connectors[ro] == connector) {
<------><------><------><------>if (connector_funcs->best_encoder)
<------><------><------><------><------>new_encoder = connector_funcs->best_encoder(connector);
<------><------><------><------>else
<------><------><------><------><------>new_encoder = drm_connector_get_single_encoder(connector);
 
<------><------><------><------>/* if we can't get an encoder for a connector
<------><------><------><------>   we are setting now - then fail */
<------><------><------><------>if (new_encoder == NULL)
<------><------><------><------><------>/* don't break so fail path works correct */
<------><------><------><------><------>fail = 1;
 
<------><------><------><------>if (connector->dpms != DRM_MODE_DPMS_ON) {
<------><------><------><------><------>DRM_DEBUG_KMS("connector dpms not on, full mode switch\n");
<------><------><------><------><------>mode_changed = true;
<------><------><------><------>}
 
<------><------><------><------>break;
<------><------><------>}
<------><------>}
 
<------><------>if (new_encoder != connector->encoder) {
<------><------><------>DRM_DEBUG_KMS("encoder changed, full mode switch\n");
<------><------><------>mode_changed = true;
<------><------><------>/* If the encoder is reused for another connector, then
<------><------><------> * the appropriate crtc will be set later.
<------><------><------> */
<------><------><------>if (connector->encoder)
<------><------><------><------>connector->encoder->crtc = NULL;
<------><------><------>connector->encoder = new_encoder;
<------><------>}
<------>}
<------>drm_connector_list_iter_end(&conn_iter);
 
<------>if (fail) {
<------><------>ret = -EINVAL;
<------><------>goto fail;
<------>}
 
<------>count = 0;
<------>drm_connector_list_iter_begin(dev, &conn_iter);
<------>drm_for_each_connector_iter(connector, &conn_iter) {
<------><------>if (!connector->encoder)
<------><------><------>continue;
 
<------><------>if (connector->encoder->crtc == set->crtc)
<------><------><------>new_crtc = NULL;
<------><------>else
<------><------><------>new_crtc = connector->encoder->crtc;
 
<------><------>for (ro = 0; ro < set->num_connectors; ro++) {
<------><------><------>if (set->connectors[ro] == connector)
<------><------><------><------>new_crtc = set->crtc;
<------><------>}
 
<------><------>/* Make sure the new CRTC will work with the encoder */
<------><------>if (new_crtc &&
<------><------>    !drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
<------><------><------>ret = -EINVAL;
<------><------><------>drm_connector_list_iter_end(&conn_iter);
<------><------><------>goto fail;
<------><------>}
<------><------>if (new_crtc != connector->encoder->crtc) {
<------><------><------>DRM_DEBUG_KMS("crtc changed, full mode switch\n");
<------><------><------>mode_changed = true;
<------><------><------>connector->encoder->crtc = new_crtc;
<------><------>}
<------><------>if (new_crtc) {
<------><------><------>DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d:%s]\n",
<------><------><------><------>      connector->base.id, connector->name,
<------><------><------><------>      new_crtc->base.id, new_crtc->name);
<------><------>} else {
<------><------><------>DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
<------><------><------><------>      connector->base.id, connector->name);
<------><------>}
<------>}
<------>drm_connector_list_iter_end(&conn_iter);
 
<------>/* mode_set_base is not a required function */
<------>if (fb_changed && !crtc_funcs->mode_set_base)
<------><------>mode_changed = true;
 
<------>if (mode_changed) {
<------><------>if (drm_helper_crtc_in_use(set->crtc)) {
<------><------><------>DRM_DEBUG_KMS("attempting to set mode from"
<------><------><------><------><------>" userspace\n");
<------><------><------>drm_mode_debug_printmodeline(set->mode);
<------><------><------>set->crtc->primary->fb = set->fb;
<------><------><------>if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
<------><------><------><------><------><------>      set->x, set->y,
<------><------><------><------><------><------>      save_set.fb)) {
<------><------><------><------>DRM_ERROR("failed to set mode on [CRTC:%d:%s]\n",
<------><------><------><------><------>  set->crtc->base.id, set->crtc->name);
<------><------><------><------>set->crtc->primary->fb = save_set.fb;
<------><------><------><------>ret = -EINVAL;
<------><------><------><------>goto fail;
<------><------><------>}
<------><------><------>DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
<------><------><------>for (i = 0; i < set->num_connectors; i++) {
<------><------><------><------>DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
<------><------><------><------><------>      set->connectors[i]->name);
<------><------><------><------>set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON);
<------><------><------>}
<------><------>}
<------><------>__drm_helper_disable_unused_functions(dev);
<------>} else if (fb_changed) {
<------><------>set->crtc->x = set->x;
<------><------>set->crtc->y = set->y;
<------><------>set->crtc->primary->fb = set->fb;
<------><------>ret = crtc_funcs->mode_set_base(set->crtc,
<------><------><------><------><------><------>set->x, set->y, save_set.fb);
<------><------>if (ret != 0) {
<------><------><------>set->crtc->x = save_set.x;
<------><------><------>set->crtc->y = save_set.y;
<------><------><------>set->crtc->primary->fb = save_set.fb;
<------><------><------>goto fail;
<------><------>}
<------>}
 
<------>kfree(save_connector_encoders);
<------>kfree(save_encoder_crtcs);
<------>return 0;
 
fail:
<------>/* Restore all previous data. */
<------>count = 0;
<------>drm_for_each_encoder(encoder, dev) {
<------><------>encoder->crtc = save_encoder_crtcs[count++];
<------>}
 
<------>count = 0;
<------>drm_connector_list_iter_begin(dev, &conn_iter);
<------>drm_for_each_connector_iter(connector, &conn_iter)
<------><------>connector->encoder = save_connector_encoders[count++];
<------>drm_connector_list_iter_end(&conn_iter);
 
<------>/* after fail drop reference on all unbound connectors in set, let
<------> * bound connectors keep their reference
<------> */
<------>for (ro = 0; ro < set->num_connectors; ro++) {
<------><------>if (set->connectors[ro]->encoder)
<------><------><------>continue;
<------><------>drm_connector_put(set->connectors[ro]);
<------>}
 
<------>/* Try to restore the config */
<------>if (mode_changed &&
<------>    !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x,
<------><------><------><------>      save_set.y, save_set.fb))
<------><------>DRM_ERROR("failed to restore config after modeset failure\n");
 
<------>kfree(save_connector_encoders);
<------>kfree(save_encoder_crtcs);
<------>return ret;
}
EXPORT_SYMBOL(drm_crtc_helper_set_config);
 
static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder)
{
<------>int dpms = DRM_MODE_DPMS_OFF;
<------>struct drm_connector *connector;
<------>struct drm_connector_list_iter conn_iter;
<------>struct drm_device *dev = encoder->dev;
 
<------>drm_connector_list_iter_begin(dev, &conn_iter);
<------>drm_for_each_connector_iter(connector, &conn_iter)
<------><------>if (connector->encoder == encoder)
<------><------><------>if (connector->dpms < dpms)
<------><------><------><------>dpms = connector->dpms;
<------>drm_connector_list_iter_end(&conn_iter);
 
<------>return dpms;
}
 
/* Helper which handles bridge ordering around encoder dpms */
static void drm_helper_encoder_dpms(struct drm_encoder *encoder, int mode)
{
<------>const struct drm_encoder_helper_funcs *encoder_funcs;
 
<------>encoder_funcs = encoder->helper_private;
<------>if (!encoder_funcs)
<------><------>return;
 
<------>if (encoder_funcs->dpms)
<------><------>encoder_funcs->dpms(encoder, mode);
}
 
static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
{
<------>int dpms = DRM_MODE_DPMS_OFF;
<------>struct drm_connector *connector;
<------>struct drm_connector_list_iter conn_iter;
<------>struct drm_device *dev = crtc->dev;
 
<------>drm_connector_list_iter_begin(dev, &conn_iter);
<------>drm_for_each_connector_iter(connector, &conn_iter)
<------><------>if (connector->encoder && connector->encoder->crtc == crtc)
<------><------><------>if (connector->dpms < dpms)
<------><------><------><------>dpms = connector->dpms;
<------>drm_connector_list_iter_end(&conn_iter);
 
<------>return dpms;
}
 
/**
 * drm_helper_connector_dpms() - connector dpms helper implementation
 * @connector: affected connector
 * @mode: DPMS mode
 *
 * The drm_helper_connector_dpms() helper function implements the
 * &drm_connector_funcs.dpms callback for drivers using the legacy CRTC
 * helpers.
 *
 * This is the main helper function provided by the CRTC helper framework for
 * implementing the DPMS connector attribute. It computes the new desired DPMS
 * state for all encoders and CRTCs in the output mesh and calls the
 * &drm_crtc_helper_funcs.dpms and &drm_encoder_helper_funcs.dpms callbacks
 * provided by the driver.
 *
 * This function is deprecated.  New drivers must implement atomic modeset
 * support, where DPMS is handled in the DRM core.
 *
 * Returns:
 * Always returns 0.
 */
int drm_helper_connector_dpms(struct drm_connector *connector, int mode)
{
<------>struct drm_encoder *encoder = connector->encoder;
<------>struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
<------>int old_dpms, encoder_dpms = DRM_MODE_DPMS_OFF;
 
<------>WARN_ON(drm_drv_uses_atomic_modeset(connector->dev));
 
<------>if (mode == connector->dpms)
<------><------>return 0;
 
<------>old_dpms = connector->dpms;
<------>connector->dpms = mode;
 
<------>if (encoder)
<------><------>encoder_dpms = drm_helper_choose_encoder_dpms(encoder);
 
<------>/* from off to on, do crtc then encoder */
<------>if (mode < old_dpms) {
<------><------>if (crtc) {
<------><------><------>const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 
<------><------><------>if (crtc_funcs->dpms)
<------><------><------><------>(*crtc_funcs->dpms) (crtc,
<------><------><------><------><------><------>     drm_helper_choose_crtc_dpms(crtc));
<------><------>}
<------><------>if (encoder)
<------><------><------>drm_helper_encoder_dpms(encoder, encoder_dpms);
<------>}
 
<------>/* from on to off, do encoder then crtc */
<------>if (mode > old_dpms) {
<------><------>if (encoder)
<------><------><------>drm_helper_encoder_dpms(encoder, encoder_dpms);
<------><------>if (crtc) {
<------><------><------>const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 
<------><------><------>if (crtc_funcs->dpms)
<------><------><------><------>(*crtc_funcs->dpms) (crtc,
<------><------><------><------><------><------>     drm_helper_choose_crtc_dpms(crtc));
<------><------>}
<------>}
 
<------>return 0;
}
EXPORT_SYMBOL(drm_helper_connector_dpms);
 
/**
 * drm_helper_resume_force_mode - force-restore mode setting configuration
 * @dev: drm_device which should be restored
 *
 * Drivers which use the mode setting helpers can use this function to
 * force-restore the mode setting configuration e.g. on resume or when something
 * else might have trampled over the hw state (like some overzealous old BIOSen
 * tended to do).
 *
 * This helper doesn't provide a error return value since restoring the old
 * config should never fail due to resource allocation issues since the driver
 * has successfully set the restored configuration already. Hence this should
 * boil down to the equivalent of a few dpms on calls, which also don't provide
 * an error code.
 *
 * Drivers where simply restoring an old configuration again might fail (e.g.
 * due to slight differences in allocating shared resources when the
 * configuration is restored in a different order than when userspace set it up)
 * need to use their own restore logic.
 *
 * This function is deprecated. New drivers should implement atomic mode-
 * setting and use the atomic suspend/resume helpers.
 *
 * See also:
 * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
 */
void drm_helper_resume_force_mode(struct drm_device *dev)
{
<------>struct drm_crtc *crtc;
<------>struct drm_encoder *encoder;
<------>const struct drm_crtc_helper_funcs *crtc_funcs;
<------>int encoder_dpms;
<------>bool ret;
 
<------>WARN_ON(drm_drv_uses_atomic_modeset(dev));
 
<------>drm_modeset_lock_all(dev);
<------>drm_for_each_crtc(crtc, dev) {
 
<------><------>if (!crtc->enabled)
<------><------><------>continue;
 
<------><------>ret = drm_crtc_helper_set_mode(crtc, &crtc->mode,
<------><------><------><------><------>       crtc->x, crtc->y, crtc->primary->fb);
 
<------><------>/* Restoring the old config should never fail! */
<------><------>if (ret == false)
<------><------><------>DRM_ERROR("failed to set mode on crtc %p\n", crtc);
 
<------><------>/* Turn off outputs that were already powered off */
<------><------>if (drm_helper_choose_crtc_dpms(crtc)) {
<------><------><------>drm_for_each_encoder(encoder, dev) {
 
<------><------><------><------>if(encoder->crtc != crtc)
<------><------><------><------><------>continue;
 
<------><------><------><------>encoder_dpms = drm_helper_choose_encoder_dpms(
<------><------><------><------><------><------><------>encoder);
 
<------><------><------><------>drm_helper_encoder_dpms(encoder, encoder_dpms);
<------><------><------>}
 
<------><------><------>crtc_funcs = crtc->helper_private;
<------><------><------>if (crtc_funcs->dpms)
<------><------><------><------>(*crtc_funcs->dpms) (crtc,
<------><------><------><------><------><------>     drm_helper_choose_crtc_dpms(crtc));
<------><------>}
<------>}
 
<------>/* disable the unused connectors while restoring the modesetting */
<------>__drm_helper_disable_unused_functions(dev);
<------>drm_modeset_unlock_all(dev);
}
EXPORT_SYMBOL(drm_helper_resume_force_mode);
 
/**
 * drm_helper_force_disable_all - Forcibly turn off all enabled CRTCs
 * @dev: DRM device whose CRTCs to turn off
 *
 * Drivers may want to call this on unload to ensure that all displays are
 * unlit and the GPU is in a consistent, low power state. Takes modeset locks.
 *
 * Note: This should only be used by non-atomic legacy drivers. For an atomic
 * version look at drm_atomic_helper_shutdown().
 *
 * Returns:
 * Zero on success, error code on failure.
 */
int drm_helper_force_disable_all(struct drm_device *dev)
{
<------>struct drm_crtc *crtc;
<------>int ret = 0;
 
<------>drm_modeset_lock_all(dev);
<------>drm_for_each_crtc(crtc, dev)
<------><------>if (crtc->enabled) {
<------><------><------>struct drm_mode_set set = {
<------><------><------><------>.crtc = crtc,
<------><------><------>};
 
<------><------><------>ret = drm_mode_set_config_internal(&set);
<------><------><------>if (ret)
<------><------><------><------>goto out;
<------><------>}
out:
<------>drm_modeset_unlock_all(dev);
<------>return ret;
}
EXPORT_SYMBOL(drm_helper_force_disable_all);