/*
* Copyright (C) 2010, 2012-2017 ARM Limited. All rights reserved.
*
* This program is free software and is provided to you under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation, and any use by you of this program is subject to the terms of such GNU licence.
*
* A copy of the licence is included with the program, and can also be obtained from Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#ifndef _MALIGP2_CONROL_REGS_H_
#define _MALIGP2_CONROL_REGS_H_
/**
* These are the different geometry processor control registers.
* Their usage is to control and monitor the operation of the
* Vertex Shader and the Polygon List Builder in the geometry processor.
* Addresses are in 32-bit word relative sizes.
* @see [P0081] "Geometry Processor Data Structures" for details
*/
typedef enum {
MALIGP2_REG_ADDR_MGMT_VSCL_START_ADDR = 0x00,
MALIGP2_REG_ADDR_MGMT_VSCL_END_ADDR = 0x04,
MALIGP2_REG_ADDR_MGMT_PLBUCL_START_ADDR = 0x08,
MALIGP2_REG_ADDR_MGMT_PLBUCL_END_ADDR = 0x0c,
MALIGP2_REG_ADDR_MGMT_PLBU_ALLOC_START_ADDR = 0x10,
MALIGP2_REG_ADDR_MGMT_PLBU_ALLOC_END_ADDR = 0x14,
MALIGP2_REG_ADDR_MGMT_CMD = 0x20,
MALIGP2_REG_ADDR_MGMT_INT_RAWSTAT = 0x24,
MALIGP2_REG_ADDR_MGMT_INT_CLEAR = 0x28,
MALIGP2_REG_ADDR_MGMT_INT_MASK = 0x2C,
MALIGP2_REG_ADDR_MGMT_INT_STAT = 0x30,
MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_ENABLE = 0x3C,
MALIGP2_REG_ADDR_MGMT_PERF_CNT_1_ENABLE = 0x40,
MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_SRC = 0x44,
MALIGP2_REG_ADDR_MGMT_PERF_CNT_1_SRC = 0x48,
MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_VALUE = 0x4C,
MALIGP2_REG_ADDR_MGMT_PERF_CNT_1_VALUE = 0x50,
MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_LIMIT = 0x54,
MALIGP2_REG_ADDR_MGMT_STATUS = 0x68,
MALIGP2_REG_ADDR_MGMT_VERSION = 0x6C,
MALIGP2_REG_ADDR_MGMT_VSCL_START_ADDR_READ = 0x80,
MALIGP2_REG_ADDR_MGMT_PLBCL_START_ADDR_READ = 0x84,
MALIGP2_CONTR_AXI_BUS_ERROR_STAT = 0x94,
MALIGP2_REGISTER_ADDRESS_SPACE_SIZE = 0x98,
} maligp_reg_addr_mgmt_addr;
#define MALIGP2_REG_VAL_PERF_CNT_ENABLE 1
/**
* Commands to geometry processor.
* @see MALIGP2_CTRL_REG_CMD
*/
typedef enum {
MALIGP2_REG_VAL_CMD_START_VS = (1 << 0),
MALIGP2_REG_VAL_CMD_START_PLBU = (1 << 1),
MALIGP2_REG_VAL_CMD_UPDATE_PLBU_ALLOC = (1 << 4),
MALIGP2_REG_VAL_CMD_RESET = (1 << 5),
MALIGP2_REG_VAL_CMD_FORCE_HANG = (1 << 6),
MALIGP2_REG_VAL_CMD_STOP_BUS = (1 << 9),
MALI400GP_REG_VAL_CMD_SOFT_RESET = (1 << 10), /* only valid for Mali-300 and later */
} mgp_contr_reg_val_cmd;
/** @defgroup MALIGP2_IRQ
* Interrupt status of geometry processor.
* @see MALIGP2_CTRL_REG_INT_RAWSTAT, MALIGP2_REG_ADDR_MGMT_INT_CLEAR,
* MALIGP2_REG_ADDR_MGMT_INT_MASK, MALIGP2_REG_ADDR_MGMT_INT_STAT
* @{
*/
#define MALIGP2_REG_VAL_IRQ_VS_END_CMD_LST (1 << 0)
#define MALIGP2_REG_VAL_IRQ_PLBU_END_CMD_LST (1 << 1)
#define MALIGP2_REG_VAL_IRQ_PLBU_OUT_OF_MEM (1 << 2)
#define MALIGP2_REG_VAL_IRQ_VS_SEM_IRQ (1 << 3)
#define MALIGP2_REG_VAL_IRQ_PLBU_SEM_IRQ (1 << 4)
#define MALIGP2_REG_VAL_IRQ_HANG (1 << 5)
#define MALIGP2_REG_VAL_IRQ_FORCE_HANG (1 << 6)
#define MALIGP2_REG_VAL_IRQ_PERF_CNT_0_LIMIT (1 << 7)
#define MALIGP2_REG_VAL_IRQ_PERF_CNT_1_LIMIT (1 << 8)
#define MALIGP2_REG_VAL_IRQ_WRITE_BOUND_ERR (1 << 9)
#define MALIGP2_REG_VAL_IRQ_SYNC_ERROR (1 << 10)
#define MALIGP2_REG_VAL_IRQ_AXI_BUS_ERROR (1 << 11)
#define MALI400GP_REG_VAL_IRQ_AXI_BUS_STOPPED (1 << 12)
#define MALI400GP_REG_VAL_IRQ_VS_INVALID_CMD (1 << 13)
#define MALI400GP_REG_VAL_IRQ_PLB_INVALID_CMD (1 << 14)
#define MALI400GP_REG_VAL_IRQ_RESET_COMPLETED (1 << 19)
#define MALI400GP_REG_VAL_IRQ_SEMAPHORE_UNDERFLOW (1 << 20)
#define MALI400GP_REG_VAL_IRQ_SEMAPHORE_OVERFLOW (1 << 21)
#define MALI400GP_REG_VAL_IRQ_PTR_ARRAY_OUT_OF_BOUNDS (1 << 22)
/* Mask defining all IRQs in Mali GP */
#define MALIGP2_REG_VAL_IRQ_MASK_ALL \
(\
MALIGP2_REG_VAL_IRQ_VS_END_CMD_LST | \
MALIGP2_REG_VAL_IRQ_PLBU_END_CMD_LST | \
MALIGP2_REG_VAL_IRQ_PLBU_OUT_OF_MEM | \
MALIGP2_REG_VAL_IRQ_VS_SEM_IRQ | \
MALIGP2_REG_VAL_IRQ_PLBU_SEM_IRQ | \
MALIGP2_REG_VAL_IRQ_HANG | \
MALIGP2_REG_VAL_IRQ_FORCE_HANG | \
MALIGP2_REG_VAL_IRQ_PERF_CNT_0_LIMIT | \
MALIGP2_REG_VAL_IRQ_PERF_CNT_1_LIMIT | \
MALIGP2_REG_VAL_IRQ_WRITE_BOUND_ERR | \
MALIGP2_REG_VAL_IRQ_SYNC_ERROR | \
MALIGP2_REG_VAL_IRQ_AXI_BUS_ERROR | \
MALI400GP_REG_VAL_IRQ_AXI_BUS_STOPPED | \
MALI400GP_REG_VAL_IRQ_VS_INVALID_CMD | \
MALI400GP_REG_VAL_IRQ_PLB_INVALID_CMD | \
MALI400GP_REG_VAL_IRQ_RESET_COMPLETED | \
MALI400GP_REG_VAL_IRQ_SEMAPHORE_UNDERFLOW | \
MALI400GP_REG_VAL_IRQ_SEMAPHORE_OVERFLOW | \
MALI400GP_REG_VAL_IRQ_PTR_ARRAY_OUT_OF_BOUNDS)
/* Mask defining the IRQs in Mali GP which we use */
#define MALIGP2_REG_VAL_IRQ_MASK_USED \
(\
MALIGP2_REG_VAL_IRQ_VS_END_CMD_LST | \
MALIGP2_REG_VAL_IRQ_PLBU_END_CMD_LST | \
MALIGP2_REG_VAL_IRQ_PLBU_OUT_OF_MEM | \
MALIGP2_REG_VAL_IRQ_FORCE_HANG | \
MALIGP2_REG_VAL_IRQ_WRITE_BOUND_ERR | \
MALIGP2_REG_VAL_IRQ_SYNC_ERROR | \
MALIGP2_REG_VAL_IRQ_AXI_BUS_ERROR | \
MALI400GP_REG_VAL_IRQ_VS_INVALID_CMD | \
MALI400GP_REG_VAL_IRQ_PLB_INVALID_CMD | \
MALI400GP_REG_VAL_IRQ_SEMAPHORE_UNDERFLOW | \
MALI400GP_REG_VAL_IRQ_SEMAPHORE_OVERFLOW | \
MALI400GP_REG_VAL_IRQ_PTR_ARRAY_OUT_OF_BOUNDS)
/* Mask defining non IRQs on MaliGP2*/
#define MALIGP2_REG_VAL_IRQ_MASK_NONE 0
/** }@ defgroup MALIGP2_IRQ*/
/** @defgroup MALIGP2_STATUS
* The different Status values to the geometry processor.
* @see MALIGP2_CTRL_REG_STATUS
* @{
*/
#define MALIGP2_REG_VAL_STATUS_VS_ACTIVE 0x0002
#define MALIGP2_REG_VAL_STATUS_BUS_STOPPED 0x0004
#define MALIGP2_REG_VAL_STATUS_PLBU_ACTIVE 0x0008
#define MALIGP2_REG_VAL_STATUS_BUS_ERROR 0x0040
#define MALIGP2_REG_VAL_STATUS_WRITE_BOUND_ERR 0x0100
/** }@ defgroup MALIGP2_STATUS*/
#define MALIGP2_REG_VAL_STATUS_MASK_ACTIVE (\
MALIGP2_REG_VAL_STATUS_VS_ACTIVE|\
MALIGP2_REG_VAL_STATUS_PLBU_ACTIVE)
#define MALIGP2_REG_VAL_STATUS_MASK_ERROR (\
MALIGP2_REG_VAL_STATUS_BUS_ERROR |\
MALIGP2_REG_VAL_STATUS_WRITE_BOUND_ERR )
/* This should be in the top 16 bit of the version register of gp.*/
#define MALI200_GP_PRODUCT_ID 0xA07
#define MALI300_GP_PRODUCT_ID 0xC07
#define MALI400_GP_PRODUCT_ID 0xB07
#define MALI450_GP_PRODUCT_ID 0xD07
/**
* The different sources for instrumented on the geometry processor.
* @see MALIGP2_REG_ADDR_MGMT_PERF_CNT_0_SRC
*/
enum MALIGP2_cont_reg_perf_cnt_src {
MALIGP2_REG_VAL_PERF_CNT1_SRC_NUMBER_OF_VERTICES_PROCESSED = 0x0a,
};
#endif
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags