Orange Pi5 kernel

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * MPC8377E WLAN Device Tree Source
 *
 * Copyright 2007-2009 Freescale Semiconductor Inc.
 * Copyright 2009 MontaVista Software, Inc.
 */
 
/dts-v1/;
 
/ {
<------>compatible = "fsl,mpc8377wlan";
<------>#address-cells = <1>;
<------>#size-cells = <1>;
 
<------>aliases {
<------><------>ethernet0 = &enet0;
<------><------>ethernet1 = &enet1;
<------><------>serial0 = &serial0;
<------><------>serial1 = &serial1;
<------><------>pci0 = &pci0;
<------><------>pci1 = &pci1;
<------><------>pci2 = &pci2;
<------>};
 
<------>cpus {
<------><------>#address-cells = <1>;
<------><------>#size-cells = <0>;
 
<------><------>PowerPC,8377@0 {
<------><------><------>device_type = "cpu";
<------><------><------>reg = <0x0>;
<------><------><------>d-cache-line-size = <32>;
<------><------><------>i-cache-line-size = <32>;
<------><------><------>d-cache-size = <32768>;
<------><------><------>i-cache-size = <32768>;
<------><------><------>timebase-frequency = <0>;
<------><------><------>bus-frequency = <0>;
<------><------><------>clock-frequency = <0>;
<------><------>};
<------>};
 
<------>memory {
<------><------>device_type = "memory";
<------><------>reg = <0x00000000 0x20000000>;	// 512MB at 0
<------>};
 
<------>localbus@e0005000 {
<------><------>#address-cells = <2>;
<------><------>#size-cells = <1>;
<------><------>compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
<------><------>reg = <0xe0005000 0x1000>;
<------><------>interrupts = <77 0x8>;
<------><------>interrupt-parent = <&ipic>;
<------><------>ranges = <0x0 0x0 0xfc000000 0x04000000>;
 
<------><------>flash@0,0 {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <1>;
<------><------><------>compatible = "cfi-flash";
<------><------><------>reg = <0x0 0x0 0x4000000>;
<------><------><------>bank-width = <2>;
<------><------><------>device-width = <1>;
 
<------><------><------>partition@0 {
<------><------><------><------>reg = <0 0x80000>;
<------><------><------><------>label = "u-boot";
<------><------><------><------>read-only;
<------><------><------>};
 
<------><------><------>partition@a0000 {
<------><------><------><------>reg = <0xa0000 0x300000>;
<------><------><------><------>label = "kernel";
<------><------><------>};
 
<------><------><------>partition@3a0000 {
<------><------><------><------>reg = <0x3a0000 0x3c60000>;
<------><------><------><------>label = "rootfs";
<------><------><------>};
<------><------>};
<------>};
 
<------>immr@e0000000 {
<------><------>#address-cells = <1>;
<------><------>#size-cells = <1>;
<------><------>device_type = "soc";
<------><------>compatible = "simple-bus";
<------><------>ranges = <0x0 0xe0000000 0x00100000>;
<------><------>reg = <0xe0000000 0x00000200>;
<------><------>bus-frequency = <0>;
 
<------><------>wdt@200 {
<------><------><------>device_type = "watchdog";
<------><------><------>compatible = "mpc83xx_wdt";
<------><------><------>reg = <0x200 0x100>;
<------><------>};
<------><------>gpio1: gpio-controller@c00 {
<------><------><------>#gpio-cells = <2>;
<------><------><------>compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
<------><------><------>reg = <0xc00 0x100>;
<------><------><------>interrupts = <74 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>gpio-controller;
<------><------>};
<------><------>gpio2: gpio-controller@d00 {
<------><------><------>#gpio-cells = <2>;
<------><------><------>compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
<------><------><------>reg = <0xd00 0x100>;
<------><------><------>interrupts = <75 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>gpio-controller;
<------><------>};
 
<------><------>sleep-nexus {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <1>;
<------><------><------>compatible = "simple-bus";
<------><------><------>sleep = <&pmc 0x0c000000>;
<------><------><------>ranges;
 
<------><------><------>i2c@3000 {
<------><------><------><------>#address-cells = <1>;
<------><------><------><------>#size-cells = <0>;
<------><------><------><------>cell-index = <0>;
<------><------><------><------>compatible = "fsl-i2c";
<------><------><------><------>reg = <0x3000 0x100>;
<------><------><------><------>interrupts = <14 0x8>;
<------><------><------><------>interrupt-parent = <&ipic>;
<------><------><------><------>dfsrr;
 
<------><------><------><------>at24@50 {
<------><------><------><------><------>compatible = "atmel,24c256";
<------><------><------><------><------>reg = <0x50>;
<------><------><------><------>};
 
<------><------><------><------>rtc@68 {
<------><------><------><------><------>compatible = "dallas,ds1339";
<------><------><------><------><------>reg = <0x68>;
<------><------><------><------>};
<------><------><------>};
 
<------><------><------>sdhci@2e000 {
<------><------><------><------>compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
<------><------><------><------>reg = <0x2e000 0x1000>;
<------><------><------><------>interrupts = <42 0x8>;
<------><------><------><------>interrupt-parent = <&ipic>;
<------><------><------><------>sdhci,wp-inverted;
<------><------><------><------>clock-frequency = <133333333>;
<------><------><------>};
<------><------>};
 
<------><------>i2c@3100 {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <0>;
<------><------><------>cell-index = <1>;
<------><------><------>compatible = "fsl-i2c";
<------><------><------>reg = <0x3100 0x100>;
<------><------><------>interrupts = <15 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>dfsrr;
<------><------>};
 
<------><------>spi@7000 {
<------><------><------>cell-index = <0>;
<------><------><------>compatible = "fsl,spi";
<------><------><------>reg = <0x7000 0x1000>;
<------><------><------>interrupts = <16 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>mode = "cpu";
<------><------>};
 
<------><------>dma@82a8 {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <1>;
<------><------><------>compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
<------><------><------>reg = <0x82a8 4>;
<------><------><------>ranges = <0 0x8100 0x1a8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>interrupts = <71 8>;
<------><------><------>cell-index = <0>;
<------><------><------>dma-channel@0 {
<------><------><------><------>compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
<------><------><------><------>reg = <0 0x80>;
<------><------><------><------>cell-index = <0>;
<------><------><------><------>interrupt-parent = <&ipic>;
<------><------><------><------>interrupts = <71 8>;
<------><------><------>};
<------><------><------>dma-channel@80 {
<------><------><------><------>compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
<------><------><------><------>reg = <0x80 0x80>;
<------><------><------><------>cell-index = <1>;
<------><------><------><------>interrupt-parent = <&ipic>;
<------><------><------><------>interrupts = <71 8>;
<------><------><------>};
<------><------><------>dma-channel@100 {
<------><------><------><------>compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
<------><------><------><------>reg = <0x100 0x80>;
<------><------><------><------>cell-index = <2>;
<------><------><------><------>interrupt-parent = <&ipic>;
<------><------><------><------>interrupts = <71 8>;
<------><------><------>};
<------><------><------>dma-channel@180 {
<------><------><------><------>compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
<------><------><------><------>reg = <0x180 0x28>;
<------><------><------><------>cell-index = <3>;
<------><------><------><------>interrupt-parent = <&ipic>;
<------><------><------><------>interrupts = <71 8>;
<------><------><------>};
<------><------>};
 
<------><------>usb@23000 {
<------><------><------>compatible = "fsl-usb2-dr";
<------><------><------>reg = <0x23000 0x1000>;
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <0>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>interrupts = <38 0x8>;
<------><------><------>phy_type = "ulpi";
<------><------><------>sleep = <&pmc 0x00c00000>;
<------><------>};
<------><------>enet0: ethernet@24000 {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <1>;
<------><------><------>cell-index = <0>;
<------><------><------>device_type = "network";
<------><------><------>model = "eTSEC";
<------><------><------>compatible = "gianfar";
<------><------><------>reg = <0x24000 0x1000>;
<------><------><------>ranges = <0x0 0x24000 0x1000>;
<------><------><------>local-mac-address = [ 00 00 00 00 00 00 ];
<------><------><------>interrupts = <32 0x8 33 0x8 34 0x8>;
<------><------><------>phy-connection-type = "mii";
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>tbi-handle = <&tbi0>;
<------><------><------>phy-handle = <&phy2>;
<------><------><------>sleep = <&pmc 0xc0000000>;
<------><------><------>fsl,magic-packet;
 
<------><------><------>mdio@520 {
<------><------><------><------>#address-cells = <1>;
<------><------><------><------>#size-cells = <0>;
<------><------><------><------>compatible = "fsl,gianfar-mdio";
<------><------><------><------>reg = <0x520 0x20>;
<------><------><------><------>phy2: ethernet-phy@2 {
<------><------><------><------><------>interrupt-parent = <&ipic>;
<------><------><------><------><------>interrupts = <17 0x8>;
<------><------><------><------><------>reg = <0x2>;
<------><------><------><------>};
<------><------><------><------>phy3: ethernet-phy@3 {
<------><------><------><------><------>interrupt-parent = <&ipic>;
<------><------><------><------><------>interrupts = <18 0x8>;
<------><------><------><------><------>reg = <0x3>;
<------><------><------><------>};
<------><------><------><------>tbi0: tbi-phy@11 {
<------><------><------><------><------>reg = <0x11>;
<------><------><------><------><------>device_type = "tbi-phy";
<------><------><------><------>};
<------><------><------>};
<------><------>};
<------><------>enet1: ethernet@25000 {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <1>;
<------><------><------>cell-index = <1>;
<------><------><------>device_type = "network";
<------><------><------>model = "eTSEC";
<------><------><------>compatible = "gianfar";
<------><------><------>reg = <0x25000 0x1000>;
<------><------><------>ranges = <0x0 0x25000 0x1000>;
<------><------><------>local-mac-address = [ 00 00 00 00 00 00 ];
<------><------><------>interrupts = <35 0x8 36 0x8 37 0x8>;
<------><------><------>phy-connection-type = "mii";
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>phy-handle = <&phy3>;
<------><------><------>tbi-handle = <&tbi1>;
<------><------><------>sleep = <&pmc 0x30000000>;
<------><------><------>fsl,magic-packet;
 
<------><------><------>mdio@520 {
<------><------><------><------>#address-cells = <1>;
<------><------><------><------>#size-cells = <0>;
<------><------><------><------>compatible = "fsl,gianfar-tbi";
<------><------><------><------>reg = <0x520 0x20>;
<------><------><------><------>tbi1: tbi-phy@11 {
<------><------><------><------><------>reg = <0x11>;
<------><------><------><------><------>device_type = "tbi-phy";
<------><------><------><------>};
<------><------><------>};
<------><------>};
<------><------>serial0: serial@4500 {
<------><------><------>cell-index = <0>;
<------><------><------>device_type = "serial";
<------><------><------>compatible = "fsl,ns16550", "ns16550";
<------><------><------>reg = <0x4500 0x100>;
<------><------><------>clock-frequency = <0>;
<------><------><------>interrupts = <9 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------>};
<------><------>serial1: serial@4600 {
<------><------><------>cell-index = <1>;
<------><------><------>device_type = "serial";
<------><------><------>compatible = "fsl,ns16550", "ns16550";
<------><------><------>reg = <0x4600 0x100>;
<------><------><------>clock-frequency = <0>;
<------><------><------>interrupts = <10 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------>};
 
<------><------>crypto@30000 {
<------><------><------>compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
<------><------><------><------>     "fsl,sec2.1", "fsl,sec2.0";
<------><------><------>reg = <0x30000 0x10000>;
<------><------><------>interrupts = <11 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>fsl,num-channels = <4>;
<------><------><------>fsl,channel-fifo-len = <24>;
<------><------><------>fsl,exec-units-mask = <0x9fe>;
<------><------><------>fsl,descriptor-types-mask = <0x3ab0ebf>;
<------><------><------>sleep = <&pmc 0x03000000>;
<------><------>};
 
<------><------>sata@18000 {
<------><------><------>compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
<------><------><------>reg = <0x18000 0x1000>;
<------><------><------>interrupts = <44 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>sleep = <&pmc 0x000000c0>;
<------><------>};
 
<------><------>sata@19000 {
<------><------><------>compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
<------><------><------>reg = <0x19000 0x1000>;
<------><------><------>interrupts = <45 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>sleep = <&pmc 0x00000030>;
<------><------>};
 
<------><------>/* IPIC
<------><------> * interrupts cell = <intr #, sense>
<------><------> * sense values match linux IORESOURCE_IRQ_* defines:
<------><------> * sense == 8: Level, low assertion
<------><------> * sense == 2: Edge, high-to-low change
<------><------> */
<------><------>ipic: interrupt-controller@700 {
<------><------><------>compatible = "fsl,ipic";
<------><------><------>interrupt-controller;
<------><------><------>#address-cells = <0>;
<------><------><------>#interrupt-cells = <2>;
<------><------><------>reg = <0x700 0x100>;
<------><------>};
<------><------>pmc: power@b00 {
<------><------><------>compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
<------><------><------>reg = <0xb00 0x100 0xa00 0x100>;
<------><------><------>interrupts = <80 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------>};
<------>};
<------>pci0: pci@e0008500 {
<------><------>interrupt-map-mask = <0xf800 0 0 7>;
<------><------>interrupt-map = <
<------><------><------><------>/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
 
<------><------><------><------>/* IDSEL AD14 IRQ6 inta */
<------><------><------><------> 0x7000 0x0 0x0 0x1 &ipic 22 0x8
 
<------><------><------><------>/* IDSEL AD15 IRQ5 inta */
<------><------><------><------> 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
<------><------>interrupt-parent = <&ipic>;
<------><------>interrupts = <66 0x8>;
<------><------>bus-range = <0 0>;
<------><------>ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
<------><------>          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
<------><------>          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
<------><------>sleep = <&pmc 0x00010000>;
<------><------>clock-frequency = <66666666>;
<------><------>#interrupt-cells = <1>;
<------><------>#size-cells = <2>;
<------><------>#address-cells = <3>;
<------><------>reg = <0xe0008500 0x100		/* internal registers */
<------><------>       0xe0008300 0x8>;		/* config space access registers */
<------><------>compatible = "fsl,mpc8349-pci";
<------><------>device_type = "pci";
<------>};
<------>pci1: pcie@e0009000 {
<------><------>#address-cells = <3>;
<------><------>#size-cells = <2>;
<------><------>#interrupt-cells = <1>;
<------><------>device_type = "pci";
<------><------>compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
<------><------>reg = <0xe0009000 0x00001000>;
<------><------>ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
<------><------>          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
<------><------>bus-range = <0 255>;
<------><------>interrupt-map-mask = <0xf800 0 0 7>;
<------><------>interrupt-map = <0 0 0 1 &ipic 1 8
<------><------><------><------> 0 0 0 2 &ipic 1 8
<------><------><------><------> 0 0 0 3 &ipic 1 8
<------><------><------><------> 0 0 0 4 &ipic 1 8>;
<------><------>sleep = <&pmc 0x00300000>;
<------><------>clock-frequency = <0>;
 
<------><------>pcie@0 {
<------><------><------>#address-cells = <3>;
<------><------><------>#size-cells = <2>;
<------><------><------>device_type = "pci";
<------><------><------>reg = <0 0 0 0 0>;
<------><------><------>ranges = <0x02000000 0 0xa8000000
<------><------><------><------>  0x02000000 0 0xa8000000
<------><------><------><------>  0 0x10000000
<------><------><------><------>  0x01000000 0 0x00000000
<------><------><------><------>  0x01000000 0 0x00000000
<------><------><------><------>  0 0x00800000>;
<------><------>};
<------>};
<------>pci2: pcie@e000a000 {
<------><------>#address-cells = <3>;
<------><------>#size-cells = <2>;
<------><------>#interrupt-cells = <1>;
<------><------>device_type = "pci";
<------><------>compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
<------><------>reg = <0xe000a000 0x00001000>;
<------><------>ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
<------><------><------>  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
<------><------>bus-range = <0 255>;
<------><------>interrupt-map-mask = <0xf800 0 0 7>;
<------><------>interrupt-map = <0 0 0 1 &ipic 2 8
<------><------><------><------> 0 0 0 2 &ipic 2 8
<------><------><------><------> 0 0 0 3 &ipic 2 8
<------><------><------><------> 0 0 0 4 &ipic 2 8>;
<------><------>sleep = <&pmc 0x000c0000>;
<------><------>clock-frequency = <0>;
 
<------><------>pcie@0 {
<------><------><------>#address-cells = <3>;
<------><------><------>#size-cells = <2>;
<------><------><------>device_type = "pci";
<------><------><------>reg = <0 0 0 0 0>;
<------><------><------>ranges = <0x02000000 0 0xc8000000
<------><------><------><------>  0x02000000 0 0xc8000000
<------><------><------><------>  0 0x10000000
<------><------><------><------>  0x01000000 0 0x00000000
<------><------><------><------>  0x01000000 0 0x00000000
<------><------><------><------>  0 0x00800000>;
<------><------>};
<------>};
};