Orange Pi5 kernel

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * MPC8308RDB Device Tree Source
 *
 * Copyright 2009 Freescale Semiconductor Inc.
 * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
 */
 
/dts-v1/;
 
/ {
<------>compatible = "fsl,mpc8308rdb";
<------>#address-cells = <1>;
<------>#size-cells = <1>;
 
<------>aliases {
<------><------>ethernet0 = &enet0;
<------><------>ethernet1 = &enet1;
<------><------>serial0 = &serial0;
<------><------>serial1 = &serial1;
<------><------>pci0 = &pci0;
<------>};
 
<------>cpus {
<------><------>#address-cells = <1>;
<------><------>#size-cells = <0>;
 
<------><------>PowerPC,8308@0 {
<------><------><------>device_type = "cpu";
<------><------><------>reg = <0x0>;
<------><------><------>d-cache-line-size = <32>;
<------><------><------>i-cache-line-size = <32>;
<------><------><------>d-cache-size = <16384>;
<------><------><------>i-cache-size = <16384>;
<------><------><------>timebase-frequency = <0>;	// from bootloader
<------><------><------>bus-frequency = <0>;		// from bootloader
<------><------><------>clock-frequency = <0>;		// from bootloader
<------><------>};
<------>};
 
<------>memory {
<------><------>device_type = "memory";
<------><------>reg = <0x00000000 0x08000000>;	// 128MB at 0
<------>};
 
<------>localbus@e0005000 {
<------><------>#address-cells = <2>;
<------><------>#size-cells = <1>;
<------><------>compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
<------><------>reg = <0xe0005000 0x1000>;
<------><------>interrupts = <77 0x8>;
<------><------>interrupt-parent = <&ipic>;
 
<------><------>// CS0 and CS1 are swapped when
<------><------>// booting from nand, but the
<------><------>// addresses are the same.
<------><------>ranges = <0x0 0x0 0xfe000000 0x00800000
<------><------>          0x1 0x0 0xe0600000 0x00002000
<------><------>          0x2 0x0 0xf0000000 0x00020000
<------><------>          0x3 0x0 0xfa000000 0x00008000>;
 
<------><------>flash@0,0 {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <1>;
<------><------><------>compatible = "cfi-flash";
<------><------><------>reg = <0x0 0x0 0x800000>;
<------><------><------>bank-width = <2>;
<------><------><------>device-width = <1>;
 
<------><------><------>u-boot@0 {
<------><------><------><------>reg = <0x0 0x60000>;
<------><------><------><------>read-only;
<------><------><------>};
<------><------><------>env@60000 {
<------><------><------><------>reg = <0x60000 0x10000>;
<------><------><------>};
<------><------><------>env1@70000 {
<------><------><------><------>reg = <0x70000 0x10000>;
<------><------><------>};
<------><------><------>kernel@80000 {
<------><------><------><------>reg = <0x80000 0x200000>;
<------><------><------>};
<------><------><------>dtb@280000 {
<------><------><------><------>reg = <0x280000 0x10000>;
<------><------><------>};
<------><------><------>ramdisk@290000 {
<------><------><------><------>reg = <0x290000 0x570000>;
<------><------><------>};
<------><------>};
 
<------><------>nand@1,0 {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <1>;
<------><------><------>compatible = "fsl,mpc8315-fcm-nand",
<------><------><------>             "fsl,elbc-fcm-nand";
<------><------><------>reg = <0x1 0x0 0x2000>;
 
<------><------><------>jffs2@0 {
<------><------><------><------>reg = <0x0 0x2000000>;
<------><------><------>};
<------><------>};
<------>};
 
<------>immr@e0000000 {
<------><------>#address-cells = <1>;
<------><------>#size-cells = <1>;
<------><------>device_type = "soc";
<------><------>compatible = "fsl,mpc8308-immr", "simple-bus";
<------><------>ranges = <0 0xe0000000 0x00100000>;
<------><------>reg = <0xe0000000 0x00000200>;
<------><------>bus-frequency = <0>;
 
<------><------>i2c@3000 {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <0>;
<------><------><------>cell-index = <0>;
<------><------><------>compatible = "fsl-i2c";
<------><------><------>reg = <0x3000 0x100>;
<------><------><------>interrupts = <14 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>dfsrr;
<------><------><------>rtc@68 {
<------><------><------><------>compatible = "dallas,ds1339";
<------><------><------><------>reg = <0x68>;
<------><------><------>};
<------><------>};
 
<------><------>usb@23000 {
<------><------><------>compatible = "fsl-usb2-dr";
<------><------><------>reg = <0x23000 0x1000>;
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <0>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>interrupts = <38 0x8>;
<------><------><------>dr_mode = "peripheral";
<------><------><------>phy_type = "ulpi";
<------><------>};
<------><------>enet0: ethernet@24000 {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <1>;
<------><------><------>ranges = <0x0 0x24000 0x1000>;
 
<------><------><------>cell-index = <0>;
<------><------><------>device_type = "network";
<------><------><------>model = "eTSEC";
<------><------><------>compatible = "gianfar";
<------><------><------>reg = <0x24000 0x1000>;
<------><------><------>local-mac-address = [ 00 00 00 00 00 00 ];
<------><------><------>interrupts = <32 0x8 33 0x8 34 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>tbi-handle = < &tbi0 >;
<------><------><------>phy-handle = < &phy2 >;
<------><------><------>fsl,magic-packet;
 
<------><------><------>mdio@520 {
<------><------><------><------>#address-cells = <1>;
<------><------><------><------>#size-cells = <0>;
<------><------><------><------>compatible = "fsl,gianfar-mdio";
<------><------><------><------>reg = <0x520 0x20>;
<------><------><------><------>phy2: ethernet-phy@2 {
<------><------><------><------><------>interrupt-parent = <&ipic>;
<------><------><------><------><------>interrupts = <17 0x8>;
<------><------><------><------><------>reg = <0x2>;
<------><------><------><------>};
<------><------><------><------>tbi0: tbi-phy@11 {
<------><------><------><------><------>reg = <0x11>;
<------><------><------><------><------>device_type = "tbi-phy";
<------><------><------><------>};
<------><------><------>};
<------><------>};
<------><------>enet1: ethernet@25000 {
<------><------><------>#address-cells = <1>;
<------><------><------>#size-cells = <1>;
<------><------><------>cell-index = <1>;
<------><------><------>device_type = "network";
<------><------><------>model = "eTSEC";
<------><------><------>compatible = "gianfar";
<------><------><------>reg = <0x25000 0x1000>;
<------><------><------>ranges = <0x0 0x25000 0x1000>;
<------><------><------>local-mac-address = [ 00 00 00 00 00 00 ];
<------><------><------>interrupts = <35 0x8 36 0x8 37 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>tbi-handle = < &tbi1 >;
<------><------><------>/* Vitesse 7385 isn't on the MDIO bus */
<------><------><------>fixed-link = <1 1 1000 0 0>;
<------><------><------>fsl,magic-packet;
 
<------><------><------>mdio@520 {
<------><------><------><------>#address-cells = <1>;
<------><------><------><------>#size-cells = <0>;
<------><------><------><------>compatible = "fsl,gianfar-tbi";
<------><------><------><------>reg = <0x520 0x20>;
<------><------><------><------>tbi1: tbi-phy@11 {
<------><------><------><------><------>reg = <0x11>;
<------><------><------><------><------>device_type = "tbi-phy";
<------><------><------><------>};
<------><------><------>};
<------><------>};
<------><------>serial0: serial@4500 {
<------><------><------>cell-index = <0>;
<------><------><------>device_type = "serial";
<------><------><------>compatible = "fsl,ns16550", "ns16550";
<------><------><------>reg = <0x4500 0x100>;
<------><------><------>clock-frequency = <133333333>;
<------><------><------>interrupts = <9 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------>};
<------><------>serial1: serial@4600 {
<------><------><------>cell-index = <1>;
<------><------><------>device_type = "serial";
<------><------><------>compatible = "fsl,ns16550", "ns16550";
<------><------><------>reg = <0x4600 0x100>;
<------><------><------>clock-frequency = <133333333>;
<------><------><------>interrupts = <10 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------>};
 
<------><------>gpio@c00 {
<------><------><------>#gpio-cells = <2>;
<------><------><------>device_type = "gpio";
<------><------><------>compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
<------><------><------>reg = <0xc00 0x18>;
<------><------><------>interrupts = <74 0x8>;
<------><------><------>interrupt-parent = <&ipic>;
<------><------><------>gpio-controller;
<------><------>};
 
<------><------>/* IPIC
<------><------> * interrupts cell = <intr #, sense>
<------><------> * sense values match linux IORESOURCE_IRQ_* defines:
<------><------> * sense == 8: Level, low assertion
<------><------> * sense == 2: Edge, high-to-low change
<------><------> */
<------><------>ipic: interrupt-controller@700 {
<------><------><------>compatible = "fsl,ipic";
<------><------><------>interrupt-controller;
<------><------><------>#address-cells = <0>;
<------><------><------>#interrupt-cells = <2>;
<------><------><------>reg = <0x700 0x100>;
<------><------><------>device_type = "ipic";
<------><------>};
 
<------><------>ipic-msi@7c0 {
<------><------><------>compatible = "fsl,ipic-msi";
<------><------><------>reg = <0x7c0 0x40>;
<------><------><------>msi-available-ranges = <0x0 0x100>;
<------><------><------>interrupts = < 0x43 0x8
<------><------><------><------><------>0x4  0x8
<------><------><------><------><------>0x51 0x8
<------><------><------><------><------>0x52 0x8
<------><------><------><------><------>0x56 0x8
<------><------><------><------><------>0x57 0x8
<------><------><------><------><------>0x58 0x8
<------><------><------><------><------>0x59 0x8 >;
<------><------><------>interrupt-parent = < &ipic >;
<------><------>};
 
<------><------>dma@2c000 {
<------><------><------>compatible = "fsl,mpc8308-dma";
<------><------><------>reg = <0x2c000 0x1800>;
<------><------><------>interrupts = <3 0x8
<------><------><------><------><------>94 0x8>;
<------><------><------>interrupt-parent = < &ipic >;
<------><------>};
 
<------>};
<------>pci0: pcie@e0009000 {
<------><------>#address-cells = <3>;
<------><------>#size-cells = <2>;
<------><------>#interrupt-cells = <1>;
<------><------>device_type = "pci";
<------><------>compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
<------><------>reg = <0xe0009000 0x00001000
<------><------><------>0xb0000000 0x01000000>;
<------><------>ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
<------><------>          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
<------><------>bus-range = <0 0>;
<------><------>interrupt-map-mask = <0xf800 0 0 7>;
<------><------>interrupt-map = <0 0 0 1 &ipic 1 8
<------><------><------><------> 0 0 0 2 &ipic 1 8
<------><------><------><------> 0 0 0 3 &ipic 1 8
<------><------><------><------> 0 0 0 4 &ipic 1 8>;
<------><------>interrupts = <0x1 0x8>;
<------><------>interrupt-parent = <&ipic>;
<------><------>clock-frequency = <0>;
 
<------><------>pcie@0 {
<------><------><------>#address-cells = <3>;
<------><------><------>#size-cells = <2>;
<------><------><------>device_type = "pci";
<------><------><------>reg = <0 0 0 0 0>;
<------><------><------>ranges = <0x02000000 0 0xa0000000
<------><------><------><------>  0x02000000 0 0xa0000000
<------><------><------><------>  0 0x10000000
<------><------><------><------>  0x01000000 0 0x00000000
<------><------><------><------>  0x01000000 0 0x00000000
<------><------><------><------>  0 0x00800000>;
<------><------>};
<------>};
};