// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
*
*/
#include "rk3588.dtsi"
#include "rk3588-evb.dtsi"
#include "rk3588-rk806-dual.dtsi"
/ {
es7202_sound_micarray: es7202-sound-micarray {
status = "okay";
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,name = "rockchip,sound-micarray";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,dai-link@0 {
format = "pdm";
cpu {
sound-dai = <&pdm0>;
};
codec {
sound-dai = <&es7202>;
};
};
};
es8388_sound: es8388-sound {
status = "okay";
compatible = "rockchip,multicodecs-card";
rockchip,card-name = "rockchip-es8388";
hp-det-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
io-channels = <&saradc 3>;
io-channel-names = "adc-detect";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
spk-con-gpio = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
hp-con-gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
rockchip,format = "i2s";
rockchip,mclk-fs = <256>;
rockchip,cpu = <&i2s0_8ch>;
rockchip,codec = <&es8388>;
rockchip,audio-routing =
"Headphone", "LOUT1",
"Headphone", "ROUT1",
"Speaker", "LOUT2",
"Speaker", "ROUT2",
"Headphone", "Headphone Power",
"Headphone", "Headphone Power",
"Speaker", "Speaker Power",
"Speaker", "Speaker Power",
"LINPUT1", "Main Mic",
"LINPUT2", "Main Mic",
"RINPUT1", "Headset Mic",
"RINPUT2", "Headset Mic";
pinctrl-names = "default";
pinctrl-0 = <&hp_det>;
play-pause-key {
label = "playpause";
linux,code = <KEY_PLAYPAUSE>;
press-threshold-microvolt = <2000>;
};
};
fan: pwm-fan {
compatible = "pwm-fan";
#cooling-cells = <2>;
pwms = <&pwm9 0 50000 0>;
cooling-levels = <0 50 100 150 200 255>;
rockchip,temp-trips = <
50000 1
55000 2
60000 3
65000 4
70000 5
>;
};
pcie20_avdd0v85: pcie20-avdd0v85 {
compatible = "regulator-fixed";
regulator-name = "pcie20_avdd0v85";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
vin-supply = <&avdd_0v85_s0>;
};
pcie20_avdd1v8: pcie20-avdd1v8 {
compatible = "regulator-fixed";
regulator-name = "pcie20_avdd1v8";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&avcc_1v8_s0>;
};
pcie30_avdd0v75: pcie30-avdd0v75 {
compatible = "regulator-fixed";
regulator-name = "pcie30_avdd0v75";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
vin-supply = <&avdd_0v75_s0>;
};
pcie30_avdd1v8: pcie30-avdd1v8 {
compatible = "regulator-fixed";
regulator-name = "pcie30_avdd1v8";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&avcc_1v8_s0>;
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&hym8563>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
/*
* On the module itself this is one of these (depending
* on the actual card populated):
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
*/
post-power-on-delay-ms = <200>;
reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
};
vcc3v3_lcd_n: vcc3v3-lcd0-n {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_lcd0_n";
regulator-boot-on;
enable-active-high;
gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
vin-supply = <&vcc_1v8_s0>;
};
vcc3v3_pcie30: vcc3v3-pcie30 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_pcie30";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
startup-delay-us = <5000>;
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_host: vcc5v0-host {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_host";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
vin-supply = <&vcc5v0_usb>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
};
wireless_bluetooth: wireless-bluetooth {
compatible = "bluetooth-platdata";
clocks = <&hym8563>;
clock-names = "ext_clock";
uart_rts_gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "rts_gpio";
pinctrl-0 = <&uart9m0_rtsn>, <&bt_gpio>;
pinctrl-1 = <&uart9_gpios>;
BT,reset_gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
BT,wake_gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
BT,wake_host_irq = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
wireless_wlan: wireless-wlan {
compatible = "wlan-platdata";
wifi_chip_type = "ap6398s";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_irq>;
WIFI,host_wake_irq = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
WIFI,poweren_gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
&backlight {
pwms = <&pwm3 0 25000 0>;
status = "okay";
};
&combphy0_ps {
status = "okay";
};
&combphy1_ps {
status = "okay";
};
&combphy2_psu {
status = "okay";
};
&dp0 {
pinctrl-0 = <&dp0m2_pins>;
pinctrl-names = "default";
status = "okay";
};
&dp0_in_vp2 {
status = "okay";
};
&dp0_sound {
status = "okay";
};
&dp1 {
pinctrl-0 = <&dp1m2_pins>;
pinctrl-names = "default";
status = "okay";
};
&dp1_in_vp2 {
status = "okay";
};
/*
* mipi_dcphy1 needs to be enabled
* when dsi1 is enabled
*/
&dsi1 {
status = "okay";
};
&dsi1_in_vp2 {
status = "disabled";
};
&dsi1_in_vp3 {
status = "okay";
};
&dsi1_panel {
power-supply = <&vcc3v3_lcd_n>;
reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_rst_gpio>;
};
&gmac1 {
/* Use rgmii-rxid mode to disable rx delay inside Soc */
phy-mode = "rgmii-rxid";
clock_in_out = "output";
snps,reset-gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
pinctrl-names = "default";
pinctrl-0 = <&gmac1_miim
&gmac1_tx_bus2
&gmac1_rx_bus2
&gmac1_rgmii_clk
&gmac1_rgmii_bus>;
tx_delay = <0x45>;
/* rx_delay = <0x3f>; */
phy-handle = <&rgmii_phy>;
status = "okay";
};
&hdmi0 {
enable-gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&hdmi0_in_vp0 {
status = "okay";
};
&hdmi0_sound {
status = "okay";
};
&hdptxphy_hdmi0 {
status = "okay";
};
&i2c2 {
status = "okay";
hym8563: hym8563@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "hym8563";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
};
};
&i2c6 {
status = "okay";
gt1x: gt1x@14 {
compatible = "goodix,gt1x";
reg = <0x14>;
pinctrl-names = "default";
pinctrl-0 = <&touch_gpio>;
goodix,rst-gpio = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
goodix,irq-gpio = <&gpio0 RK_PD3 IRQ_TYPE_LEVEL_LOW>;
power-supply = <&vcc3v3_lcd_n>;
};
};
&i2c7 {
status = "okay";
es8388: es8388@11 {
status = "okay";
#sound-dai-cells = <0>;
compatible = "everest,es8388", "everest,es8323";
reg = <0x11>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
clock-names = "mclk";
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_mclk>;
};
es7202: es7202@32 {
status = "okay";
#sound-dai-cells = <0>;
compatible = "ES7202_PDM_ADC_1";
power-supply = <&vcc_1v8_s0>; /* only 1v8 or 3v3, default is 3v3 */
reg = <0x32>;
};
};
&i2s5_8ch {
status = "okay";
};
&mdio1 {
rgmii_phy: phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
};
};
&mipi_dcphy1 {
status = "okay";
};
&pcie2x1l0 {
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&pcie30phy {
status = "okay";
};
&pcie3x4 {
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie30>;
status = "okay";
};
&pdm0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pdm0m0_clk
&pdm0m0_sdi0>;
};
&pinctrl {
headphone {
hp_det: hp-det {
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
lcd {
lcd_rst_gpio: lcd-rst-gpio {
rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
touch {
touch_gpio: touch-gpio {
rockchip,pins =
<0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
<0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wireless-bluetooth {
uart9_gpios: uart9-gpios {
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_gpio: bt-gpio {
rockchip,pins =
<2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>,
<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
wireless-wlan {
wifi_host_wake_irq: wifi-host-wake-irq {
rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&pwm3 {
status = "okay";
pinctrl-0 = <&pwm3m1_pins>;
};
&pwm9 {
pinctrl-0 = <&pwm9m2_pins>;
status = "okay";
};
&route_dsi1 {
status = "okay";
connect = <&vp3_out_dsi1>;
};
&sata0 {
status = "okay";
};
&sdio {
max-frequency = <150000000>;
no-sd;
no-mmc;
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdiom0_pins>;
sd-uhs-sdr104;
status = "okay";
};
&sdmmc {
status = "okay";
vmmc-supply = <&vcc_3v3_sd_s0>;
};
&spdif_tx2 {
status = "okay";
};
&u2phy0_otg {
phy-supply = <&vcc5v0_host>;
};
&u2phy1_otg {
phy-supply = <&vcc5v0_host>;
};
&u2phy2_host {
phy-supply = <&vcc5v0_host>;
};
&u2phy3_host {
phy-supply = <&vcc5v0_host>;
};
&usbdp_phy0 {
rockchip,dp-lane-mux = <2 3>;
};
&usbdp_phy1 {
rockchip,dp-lane-mux = <2 3>;
};
&usbdrd_dwc3_0 {
dr_mode = "otg";
extcon = <&u2phy0>;
status = "okay";
};
&uart9 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart9m0_xfer &uart9m0_ctsn>;
};
&vcc3v3_lcd_n {
gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags