Orange Pi5 kernel

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
 *
 */

/dts-v1/;

#include "rk3568-nvr.dtsi"
#include <dt-bindings/clock/rk618-cru.h>

/ {
	model = "Rockchip RK3568 NVR DEMO V10 Board";
	compatible = "rockchip,rk3568-nvr-demo-v10", "rockchip,rk3568";

	gpio-leds {
		compatible = "gpio-leds";

		hdd-led {
			gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};
		net-led {
			gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};
		work-led {
			gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "timer";
		};
	};

	i2s1_sound: i2s1-sound {
		status = "okay";
		compatible = "simple-audio-card";
		simple-audio-card,format = "i2s";
		simple-audio-card,mclk-fs = <256>;
		simple-audio-card,name = "rockchip,i2s1-sound";
		simple-audio-card,cpu {
			sound-dai = <&i2s1_8ch>;
		};
		simple-audio-card,codec {
			sound-dai = <&es8311>;
		};
	};

	vcc2v5_sys: vcc2v5-ddr {
		compatible = "regulator-fixed";
		regulator-name = "vcc2v5-sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <2500000>;
		regulator-max-microvolt = <2500000>;
		vin-supply = <&vcc3v3_sys>;
	};

	vcc3v3_pcie: gpio-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_pcie";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <5000>;
		vin-supply = <&dc_12v>;
	};

	pcie30_avdd0v9: pcie30-avdd0v9 {
		compatible = "regulator-fixed";
		regulator-name = "pcie30_avdd0v9";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <900000>;
		regulator-max-microvolt = <900000>;
		vin-supply = <&vcc3v3_sys>;
	};

	pcie30_avdd1v8: pcie30-avdd1v8 {
		compatible = "regulator-fixed";
		regulator-name = "pcie30_avdd1v8";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc3v3_sys>;
	};

	vcc3v3_bu: vcc3v3-bu {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_bu";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc5v0_sys>;
	};
};

&combphy1_usq {
	pinctrl-names = "default";
	pinctrl-0 = <&sata_pm_reset>;
	rockchip,dis-u3otg1-port;
	status = "okay";
};

&combphy2_psq{
	status = "okay";
};

&gmac0 {
	phy-mode = "rgmii";
	clock_in_out = "output";

	snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	/* Reset time is 20ms, 100ms for rtl8211f */
	snps,reset-delays-us = <0 20000 100000>;

	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
	assigned-clock-rates = <0>, <125000000>;

	pinctrl-names = "default";
	pinctrl-0 = <&gmac0_miim
		     &gmac0_tx_bus2
		     &gmac0_rx_bus2
		     &gmac0_rgmii_clk
		     &gmac0_rgmii_bus>;

	tx_delay = <0x43>;
	rx_delay = <0x33>;

	phy-handle = <&rgmii_phy0>;
	status = "okay";
};

&gmac1 {
	phy-mode = "rgmii";
	clock_in_out = "output";

	snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	/* Reset time is 20ms, 100ms for rtl8211f */
	snps,reset-delays-us = <0 20000 100000>;

	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
	assigned-clock-rates = <0>, <125000000>;

	pinctrl-names = "default";
	pinctrl-0 = <&gmac1m1_miim
		     &gmac1m1_tx_bus2
		     &gmac1m1_rx_bus2
		     &gmac1m1_rgmii_clk
		     &gmac1m1_rgmii_bus>;

	tx_delay = <0x4f>;
	rx_delay = <0x2d>;

	phy-handle = <&rgmii_phy1>;
	status = "okay";
};

&i2c1 {
	status = "okay";
	hym8563: hym8563@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;

		pinctrl-names = "default";
		pinctrl-0 = <&rtc_int>;

		interrupt-parent = <&gpio0>;
		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
	};
};

&i2c3 {
	status = "okay";
	clock-frequency = <400000>;

	es8311: es8311@18 {
		compatible = "everest,es8311";
		reg = <0x18>;
		clocks = <&cru I2S1_MCLKOUT>;
		clock-names = "mclk";
		adc-pga-gain = <6>;	/* 18dB */
		adc-volume = <0xbf>;	/* 0dB */
		dac-volume = <0xbf>;	/* 0dB */
		aec-mode = "dac left, adc right";
		pinctrl-names = "default";
		pinctrl-0 = <&i2s1m0_mclk>;
		assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>;
		assigned-clock-rates = <12288000>;
		assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>;
		spk-ctl-gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_HIGH>;
		#sound-dai-cells = <0>;
	};

	rk618@50 {
		compatible = "rockchip,rk618";
		reg = <0x50>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2s3m1_mclk &rk618_int>;
		clocks = <&cru I2S3_MCLKOUT>;
		clock-names = "clkin";
		assigned-clocks =<&cru I2S3_MCLKOUT>, <&cru I2S3_MCLK_IOE>;
		assigned-clock-parents = <&cru I2S3_MCLKOUT_TX>, <&cru I2S3_MCLKOUT>;
		assigned-clock-rates = <11289600>;
		reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
		status = "okay";

		clock: cru {
			compatible = "rockchip,rk618-cru";
			clocks = <&cru I2S3_MCLKOUT>, <&cru DCLK_VOP2>;
			clock-names = "clkin", "lcdc0_dclkp";
			assigned-clocks = <&clock SCALER_PLLIN_CLK>,
			<&clock VIF_PLLIN_CLK>,
			<&clock SCALER_CLK>,
			<&clock VIF0_PRE_CLK>,
			<&clock CODEC_CLK>,
			<&clock DITHER_CLK>;
			assigned-clock-parents = <&cru I2S3_MCLKOUT_TX>,
			<&clock LCDC0_CLK>,
			<&clock SCALER_PLL_CLK>,
			<&clock VIF_PLL_CLK>,
			<&cru I2S3_MCLKOUT>,
			<&clock VIF0_CLK>;
			#clock-cells = <1>;
			status = "okay";
		};

		hdmi {
			compatible = "rockchip,rk618-hdmi";
			clocks = <&clock HDMI_CLK>;
			clock-names = "hdmi";
			assigned-clocks = <&clock HDMI_CLK>;
			assigned-clock-parents = <&clock VIF0_CLK>;
			interrupt-parent = <&gpio0>;
			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
			status = "okay";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					hdmi_in_rgb: endpoint {
						remote-endpoint = <&rgb_out_hdmi>;
					};
				};
			};
		};
	};
};

&mdio0 {
	rgmii_phy0: phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0x0>;
	};
};

&mdio1 {
	rgmii_phy1: phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0x0>;
	};
};

&pcie30phy {
	status = "okay";
};

&pcie3x1 {
	reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
	status = "okay";
};

&pcie3x2 {
	reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
	status = "okay";
};

&pwm15 {
	compatible = "rockchip,remotectl-pwm";
	pinctrl-names = "default";
	pinctrl-0 = <&pwm15m1_pins>;
	remote_pwm_id = <3>;
	handle_cpu_id = <1>;
	remote_support_psci = <0>;
	status = "okay";

	ir_key1 {
		rockchip,usercode = <0x4040>;
		rockchip,key_table =
			<0xf2	KEY_REPLY>,
			<0xba	KEY_BACK>,
			<0xf4	KEY_UP>,
			<0xf1	KEY_DOWN>,
			<0xef	KEY_LEFT>,
			<0xee	KEY_RIGHT>,
			<0xbd	KEY_HOME>,
			<0xea	KEY_VOLUMEUP>,
			<0xe3	KEY_VOLUMEDOWN>,
			<0xe2	KEY_SEARCH>,
			<0xb2	KEY_POWER>,
			<0xbc	KEY_MUTE>,
			<0xec	KEY_MENU>,
			<0xbf	0x190>,
			<0xe0	0x191>,
			<0xe1	0x192>,
			<0xe9	183>,
			<0xe6	248>,
			<0xe8	185>,
			<0xe7	186>,
			<0xf0	388>,
			<0xbe	0x175>;
	};

	ir_key2 {
		rockchip,usercode = <0xff00>;
		rockchip,key_table =
			<0xf9	KEY_HOME>,
			<0xbf	KEY_BACK>,
			<0xfb	KEY_MENU>,
			<0xaa	KEY_REPLY>,
			<0xb9	KEY_UP>,
			<0xe9	KEY_DOWN>,
			<0xb8	KEY_LEFT>,
			<0xea	KEY_RIGHT>,
			<0xeb	KEY_VOLUMEDOWN>,
			<0xef	KEY_VOLUMEUP>,
			<0xf7	KEY_MUTE>,
			<0xe7	KEY_POWER>,
			<0xfc	KEY_POWER>,
			<0xa9	KEY_VOLUMEDOWN>,
			<0xa8	KEY_PLAYPAUSE>,
			<0xe0	KEY_VOLUMEDOWN>,
			<0xa5	KEY_VOLUMEDOWN>,
			<0xab	183>,
			<0xb7	388>,
			<0xe8	388>,
			<0xf8	184>,
			<0xaf	185>,
			<0xed	KEY_VOLUMEDOWN>,
			<0xee	186>,
			<0xb3	KEY_VOLUMEDOWN>,
			<0xf1	KEY_VOLUMEDOWN>,
			<0xf2	KEY_VOLUMEDOWN>,
			<0xf3	KEY_SEARCH>,
			<0xb4	KEY_VOLUMEDOWN>,
			<0xa4	KEY_SETUP>,
			<0xbe	KEY_SEARCH>;
	};

	ir_key3 {
		rockchip,usercode = <0x1dcc>;
		rockchip,key_table =
			<0xee	KEY_REPLY>,
			<0xf0	KEY_BACK>,
			<0xf8	KEY_UP>,
			<0xbb	KEY_DOWN>,
			<0xef	KEY_LEFT>,
			<0xed	KEY_RIGHT>,
			<0xfc	KEY_HOME>,
			<0xf1	KEY_VOLUMEUP>,
			<0xfd	KEY_VOLUMEDOWN>,
			<0xb7	KEY_SEARCH>,
			<0xff	KEY_POWER>,
			<0xf3	KEY_MUTE>,
			<0xbf	KEY_MENU>,
			<0xf9	0x191>,
			<0xf5	0x192>,
			<0xb3	388>,
			<0xbe	KEY_1>,
			<0xba	KEY_2>,
			<0xb2	KEY_3>,
			<0xbd	KEY_4>,
			<0xf9	KEY_5>,
			<0xb1	KEY_6>,
			<0xfc	KEY_7>,
			<0xf8	KEY_8>,
			<0xb0	KEY_9>,
			<0xb6	KEY_0>,
			<0xb5	KEY_BACKSPACE>;
	};
};

&rgb {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&lcdc_ctl>;
	ports {
		port@1 {
			reg = <1>;

			rgb_out_hdmi: endpoint {
				remote-endpoint = <&hdmi_in_rgb>;
			};
		};
	};
};

&rgb_in_vp2 {
	status = "okay";
};

&sata1 {
	status = "okay";
};

&sata2 {
	status = "okay";
};

&pinctrl {
	rk618 {
		rk618_reset: rk618-reeset {
			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_output_high>;
		};
		rk618_int: rk618-int {
			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	rtc {
		rtc_int: rtc-int {
			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	sata {
		sata_pm_reset: sata-pm-reset {
			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
		};
	};
};