Orange Pi5 kernel

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3566.dtsi"
#include "rk3566-evb.dtsi"

/ {
	model = "Rockchip RK3566 EVB5 LP4X V10 Board";
	compatible = "rockchip,rk3566-evb5-lp4x-v10", "rockchip,rk3566";

	vcc3v3_pcie: gpio-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_pcie";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <5000>;
		vin-supply = <&dc_12v>;
	};

	rk_headset: rk-headset {
		compatible = "rockchip_headset";
		headset_gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&hp_det>;
	};

	vcc3v3_vga: vcc3v3-vga {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_vga";
		regulator-always-on;
		regulator-boot-on;
		gpio = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		vin-supply = <&vcc3v3_sys>;
	};
};

&audiopwmout_diff {
	status = "disabled";
};

&combphy1_usq {
	status = "okay";
};

&combphy2_psq {
	status = "disabled";
};

&dig_acodec {
	status = "disabled";
	rockchip,pwm-output-mode;
	pinctrl-names = "default";
	pinctrl-0 = <&audiopwm_loutp
		&audiopwm_loutn
		&audiopwm_routp
		&audiopwm_routn
	>;
};

/*
 * video_phy0 needs to be enabled
 * when dsi0 is enabled
 */
&dsi0 {
	status = "okay";
	connect = <&vp1_out_dsi0>;
};

&dsi0_in_vp0 {
	status = "disabled";
};

&dsi0_in_vp1 {
	status = "okay";
};

&dsi0_panel {
	power-supply = <&vcc3v3_lcd0_n>;
	reset-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default";
	pinctrl-0 = <&lcd0_rst_gpio>;
};

/*
 * video_phy1 needs to be enabled
 * when dsi1 is enabled
 */
&dsi1 {
	status = "disabled";
};

&dsi1_in_vp0 {
	status = "disabled";
};

&dsi1_in_vp1 {
	status = "disabled";
};

&dsi1_panel {
	power-supply = <&vcc3v3_lcd1_n>;
	reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default";
	pinctrl-0 = <&lcd1_rst_gpio>;
};

&edp {
	hpd-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
	status = "disabled";
};

&edp_phy {
	status = "disabled";
};

&edp_in_vp0 {
	status = "disabled";
};

&edp_in_vp1 {
	status = "disabled";
};

&gmac1 {
	phy-mode = "rgmii";
	clock_in_out = "output";

	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	/* Reset time is 20ms, 100ms for rtl8211f */
	snps,reset-delays-us = <0 20000 100000>;

	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
	assigned-clock-rates = <0>, <125000000>;

	pinctrl-names = "default";
	pinctrl-0 = <&gmac1m0_miim
		     &gmac1m0_tx_bus2_level3
		     &gmac1m0_rx_bus2
		     &gmac1m0_rgmii_clk_level2
		     &gmac1m0_rgmii_bus_level3>;

	tx_delay = <0x41>;
	rx_delay = <0x2e>;

	phy-handle = <&rgmii_phy1>;
	status = "disabled";
};

/*
 * power-supply should switche to vcc3v3_lcd1_n
 * when mipi panel is connected to dsi1.
 */
&gt1x {
	power-supply = <&vcc3v3_lcd0_n>;
};

&i2c5 {
	status = "disabled";
};

&i2s3_2ch {
	status = "disabled";
};

&mdio1 {
	rgmii_phy1: phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0x0>;
	};
};

&video_phy0 {
	status = "okay";
};

&video_phy1 {
	status = "disabled";
};

&pcie2x1 {
	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
	status = "disabled";
};

&pdm {
	status = "disabled";
	pinctrl-names = "default";
	pinctrl-0 = <&pdmm1_clk1
		     &pdmm1_sdi1
		     &pdmm1_sdi2
		     &pdmm1_sdi3>;
};

&pdmics {
	status = "disabled";
};

&pdm_mic_array {
	status = "disabled";
};

&route_dsi0 {
	status = "okay";
};

&sdmmc2 {
	status = "disabled";
};

&uart1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn>;
};

&uart3 {
	status = "disabled";
};

&uart4 {
	status = "disabled";
};

&uart7 {
	status = "disabled";
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host0_ohci {
	status = "disabled";
};

&usb_host1_ehci {
	status = "okay";
};

&usb_host1_ohci {
	status = "disabled";
};

&vcc3v3_lcd0_n {
	gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
	enable-active-high;
};

&vcc3v3_lcd1_n {
	gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
	enable-active-high;
};

&wireless_bluetooth {
	uart_rts_gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default", "rts_gpio";
	pinctrl-0 = <&uart1m1_rtsn>;
	pinctrl-1 = <&uart1_gpios>;
	BT,reset_gpio    = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
	BT,wake_gpio     = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
	BT,wake_host_irq = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
	status = "disabled";
};

&wireless_wlan {
	pinctrl-names = "default";
	pinctrl-0 = <&wifi_host_wake_irq>;
	status = "disabled";
};

&work_led {
	status = "disabled";
};

&pinctrl {
	headphone {
		hp_det: hp-det {
			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};

	lcd0 {
		lcd0_rst_gpio: lcd0-rst-gpio {
			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	lcd1 {
		lcd1_rst_gpio: lcd1-rst-gpio {
			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	wireless-wlan {
		wifi_host_wake_irq: wifi-host-wake-irq {
			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};

	wireless-bluetooth {
		uart1_gpios: uart1-gpios {
			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};