// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
*/
/dts-v1/;
#include "rk3399-excavator-sapphire.dtsi"
#include "rk3399-linux.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Rockchip RK3399 Excavator Board (Linux Opensource)";
compatible = "rockchip,rk3399-excavator-linux", "rockchip,rk3399";
fiq_debugger: fiq-debugger {
compatible = "rockchip,fiq-debugger";
rockchip,serial-id = <2>;
rockchip,signal-irq = <182>;
rockchip,wake-irq = <0>;
rockchip,irq-mode-enable = <1>; /* If enable uart uses irq instead of fiq */
rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
pinctrl-names = "default";
pinctrl-0 = <&uart2c_xfer>;
};
edp_panel: edp-panel {
compatible = "lg,lp079qx1-sp0v", "panel-simple";
backlight = <&backlight>;
power-supply = <&vcc3v3_s0>;
enable-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_panel_reset>;
ports {
panel_in_edp: endpoint {
remote-endpoint = <&edp_out_panel>;
};
};
};
hdmi_sound: hdmi-sound {
status = "okay";
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
button@0 {
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
gpio-key,wakeup = <1>;
debounce-interval = <100>;
};
};
vccadc_ref: vccadc-ref {
compatible = "regulator-fixed";
regulator-name = "vcc1v8_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ext_cam_clk: external-camera-clock {
compatible = "fixed-clock";
clock-frequency = <27000000>;
clock-output-names = "CLK_CAMERA_27MHZ";
#clock-cells = <0>;
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 1>;
io-channel-names = "buttons";
poll-interval = <100>;
keyup-threshold-microvolt = <1800000>;
button-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
press-threshold-microvolt = <100000>;
};
button-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
press-threshold-microvolt = <300000>;
};
back {
label = "Back";
linux,code = <KEY_BACK>;
press-threshold-microvolt = <985000>;
};
menu {
label = "Menu";
linux,code = <KEY_MENU>;
press-threshold-microvolt = <1314000>;
};
};
};
&rkisp1_0 {
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
isp0_mipi_in: endpoint@0 {
reg = <0>;
remote-endpoint = <&dphy_rx0_out>;
};
};
};
&mipi_dphy_rx0 {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
mipi_in_ucam0: endpoint@1 {
reg = <1>;
remote-endpoint = <&ucam_out0>;
data-lanes = <1 2>;
};
};
port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
dphy_rx0_out: endpoint@0 {
reg = <0>;
remote-endpoint = <&isp0_mipi_in>;
};
};
};
};
&isp0_mmu {
status = "okay";
};
&rkisp1_1 {
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
isp1_mipi_in: endpoint@0 {
reg = <0>;
remote-endpoint = <&dphy_tx1rx1_out>;
};
};
};
&mipi_dphy_tx1rx1 {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
mipi_in_ucam1: endpoint@1 {
reg = <1>;
/* Unlinked camera */
//remote-endpoint = <&ucam_out1>;
data-lanes = <1 2>;
};
};
port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
dphy_tx1rx1_out: endpoint@0 {
reg = <0>;
remote-endpoint = <&isp1_mipi_in>;
};
};
};
};
&isp1_mmu {
status = "okay";
};
&saradc {
vref-supply = <&vccadc_ref>;
};
&backlight {
status = "okay";
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
&cdn_dp {
status = "disabled";
};
&display_subsystem {
status = "okay";
};
&dsi_in_vopl {
status = "okay";
};
&dsi_in_vopb {
status = "disabled";
};
&dsi {
status = "okay";
panel@0 {
compatible ="simple-panel-dsi";
reg = <0>;
dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST)>;
dsi,format = <MIPI_DSI_FMT_RGB888>;
dsi,lanes = <4>;
display-timings {
native-mode = <&timing0_720p_30hz>;
timing0_720p_30hz: timing0-720p-30hz {
clock-frequency = <96000000>;
hactive = <1280>;
vactive = <720>;
hback-porch = <200>;
hfront-porch = <1000>;
vback-porch = <100>;
vfront-porch = <200>;
hsync-len = <200>;
vsync-len = <200>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
timing1_1080p_30hz: timing0-1080p-30hz {
clock-frequency = <76000000>;
hactive = <1920>;
vactive = <1080>;
hback-porch = <100>;
hfront-porch = <200>;
vback-porch = <10>;
vfront-porch = <10>;
hsync-len = <20>;
vsync-len = <20>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
timing2_1080p_87hz: timing1-1080p-87hz {
clock-frequency = <220000000>;
hactive = <1920>;
vactive = <1080>;
hback-porch = <200>;
hfront-porch = <120>;
vback-porch = <20>;
vfront-porch = <2>;
hsync-len = <20>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
panel_in_dsi: endpoint {
remote-endpoint = <&dsi_out_panel>;
};
};
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi_out_panel: endpoint {
remote-endpoint = <&panel_in_dsi>;
};
};
};
};
&edp_in_vopl {
status = "disabled";
};
&edp_in_vopb {
status = "okay";
};
&route_edp {
status = "okay";
};
&edp {
force-hpd;
status = "okay";
ports {
edp_out: port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
edp_out_panel: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_in_edp>;
};
};
};
};
&hdmi {
/* remove the hdmi_cec, reused by edp_hpd */
pinctrl-0 = <&hdmi_i2c_xfer>;
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <0>;
status = "okay";
};
&i2c1 {
status = "okay";
gsl3673: gsl3673@40 {
compatible = "GSL,GSL3673";
reg = <0x40>;
screen_max_x = <1536>;
screen_max_y = <2048>;
irq_gpio_number = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
rst_gpio_number = <&gpio4 22 GPIO_ACTIVE_HIGH>;
};
tc358749x: tc358749x@f {
compatible = "toshiba,tc358749";
reg = <0xf>;
clocks = <&ext_cam_clk>;
clock-names = "refclk";
reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio2>;
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&hdmiin_gpios>;
status = "disabled";
port {
hdmiin_out0: endpoint {
/* Unlinked mipi dphy rx0 */
//remote-endpoint = <&mipi_in_ucam0>;
data-lanes = <1 2 3 4>;
clock-noncontinuous;
link-frequencies =
/bits/ 64 <297000000>;
};
};
};
vm149c: vm149c@0c {
compatible = "silicon touch,vm149c";
status = "okay";
reg = <0x0c>;
rockchip,camera-module-index = <0>;
rockchip,camera-module-facing = "back";
};
ov13850: ov13850@10 {
compatible = "ovti,ov13850";
status = "okay";
reg = <0x10>;
clocks = <&cru SCLK_CIF_OUT>;
clock-names = "xvclk";
/* conflict with csi-ctl-gpios */
reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
pwdn-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "rockchip,camera_default";
pinctrl-0 = <&cif_clkout>;
lens-focus = <&vm149c>;
port {
ucam_out0: endpoint {
remote-endpoint = <&mipi_in_ucam0>;
data-lanes = <1 2>;
};
};
};
};
&i2c4 {
status = "okay";
};
&pcie_phy {
status = "okay";
};
&pcie0 {
status = "okay";
};
&pinctrl {
buttons {
pwrbtn: pwrbtn {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
lcd-panel {
lcd_panel_reset: lcd-panel-reset {
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
hdmiin {
hdmiin_gpios: hdmiin-gpios {
rockchip,pins =
<2 RK_PA5 RK_FUNC_GPIO &pcfg_output_high>,
<2 RK_PA6 RK_FUNC_GPIO &pcfg_output_high>,
<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>,
<2 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>,
<2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>,
<2 RK_PB2 RK_FUNC_GPIO &pcfg_output_low>,
<2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
Orange Pi5 kernel
Deprecated Linux kernel 5.10.110 for OrangePi 5/5B/5+ boards
3 Commits
0 Branches
0 Tags