Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  1) Kernel driver ltc4151
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  2) =====================
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  3) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  4) Supported chips:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  5) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  6)   * Linear Technology LTC4151
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  7) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  8)     Prefix: 'ltc4151'
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  9) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10)     Addresses scanned: -
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12)     Datasheet:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14) 	http://www.linear.com/docs/Datasheet/4151fc.pdf
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) Author: Per Dalen <per.dalen@appeartv.com>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) Description
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) -----------
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 21) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 22) The LTC4151 is a High Voltage I2C Current and Voltage Monitor.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 23) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 24) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 25) Usage Notes
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 26) -----------
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 27) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 28) This driver does not probe for LTC4151 devices, since there is no register
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 29) which can be safely used to identify the chip. You will have to instantiate
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 30) the devices explicitly.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 31) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 32) Example: the following will load the driver for an LTC4151 at address 0x6f
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 33) on I2C bus #0::
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 34) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 35) 	# modprobe ltc4151
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 36) 	# echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 37) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 38) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 39) Sysfs entries
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 40) -------------
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 41) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 42) Voltage readings provided by this driver are reported as obtained from the ADIN
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 43) and VIN registers.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 44) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 45) Current reading provided by this driver is reported as obtained from the Current
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 46) Sense register. The reported value assumes that a 1 mOhm sense resistor is
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 47) installed.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 48) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 49) ======================= ==================
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 50) in1_input		VDIN voltage (mV)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 51) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 52) in2_input		ADIN voltage (mV)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 53) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 54) curr1_input		SENSE current (mA)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 55) ======================= ==================