Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  1) SMSC USB4604 High-Speed Hub Controller
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  2) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  3) Required properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  4) - compatible: Should be "smsc,usb4604"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  5) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  6) Optional properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  7) - reg: Specifies the i2c slave address, it is required and should be 0x2d
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  8)        if I2C is used.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  9) - reset-gpios: Should specify GPIO for reset.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10) - initial-mode: Should specify initial mode.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11)                 (1 for HUB mode, 2 for STANDBY mode)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13) Examples:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14) 	usb-hub@2d {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) 		compatible = "smsc,usb4604";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) 		reg = <0x2d>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) 		reset-gpios = <&gpx3 5 1>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) 		initial-mode = <1>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) 	};