Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  1) WM8804 audio CODEC
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  2) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  3) This device supports both I2C and SPI (configured with pin strapping
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  4) on the board).
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  5) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  6) Required properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  7) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  8)   - compatible : "wlf,wm8804"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  9) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10)   - reg : the I2C address of the device for I2C, the chip select
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11)           number for SPI.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13)   - PVDD-supply, DVDD-supply : Power supplies for the device, as covered
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14)     in Documentation/devicetree/bindings/regulator/regulator.txt
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) Optional properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18)   - wlf,reset-gpio: A GPIO specifier for the GPIO controlling the reset pin
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) Example:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 21) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 22) wm8804: codec@1a {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 23) 	compatible = "wlf,wm8804";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 24) 	reg = <0x1a>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 25) };