Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  1) SSM2518 audio amplifier
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  2) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  3) This device supports I2C only.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  4) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  5) Required properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  6)   - compatible : Must be "adi,ssm2518"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  7)   - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  8) 	or 0x35 (ADDR pin high)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  9) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10) Optional properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11)   - gpios : GPIO connected to the nSD pin. If the property is not present it is
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) 	        assumed that the nSD pin is hardwired to always on.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14) Example:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) 	ssm2518: ssm2518@34 {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) 		compatible = "adi,ssm2518";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) 		reg = <0x34>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) 		gpios = <&gpio 5 0>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) 	};