* Rockchip Codec Digital Interface
Required properties:
- compatible: should be one of the following
- "rockchip,codec-digital-v1"
- "rockchip,rk3568-codec-digital"
- "rockchip,rk3588-codec-digital"
- "rockchip,rv1106-codec-digital"
- "rockchip,rv1126-codec-digital"
- reg: physical base address of the controller and length of memory mapped
region.
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
- clock-names: clock names.
- rockchip,bclk-fs: configure the bclk fs.
- resets: a list of phandle + reset-specifer paris, one for each entry in reset-names.
- reset-names: reset names, should include "reset".
- rockchip,grf: the phandle of the syscon node for GRF register.
Optional properties:
- rockchip,clk-sync-mode: This is a boolean property, if present, using clk
sync mode.
- rockchip,pwm-output-mode: This is a boolean property, if present, output pwm
to drive spk.
Example:
rkacdc_dig: codec-digital@ff850000 {
compatible = "rockchip,codec-digital-v1";
reg = <0xff850000 0x1000>;
clocks = <&cru CLK_ACDCDIG_ADC>, <&cru CLK_ACDCDIG_DAC>,
<&cru PCLK_ACDCDIG>;
clock-names = "adc", "dac", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&acodec_pins>;
resets = <&cru SRST_ACDCDIG>;
reset-names = "reset" ;
rockchip,grf = <&grf>;
status = "disabled";
};