Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  1) * Microchip I2S Multi-Channel Controller
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  2) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  3) Required properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  4) - compatible:     Should be "microchip,sam9x60-i2smcc".
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  5) - reg:            Should be the physical base address of the controller and the
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  6)                   length of memory mapped region.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  7) - interrupts:     Should contain the interrupt for the controller.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  8) - dmas:           Should be one per channel name listed in the dma-names property,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  9)                   as described in atmel-dma.txt and dma.txt files.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10) - dma-names:      Identifier string for each DMA request line in the dmas property.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11) 		  Two dmas have to be defined, "tx" and "rx".
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) - clocks:         Must contain an entry for each entry in clock-names.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13)                   Please refer to clock-bindings.txt.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14) - clock-names:    Should be one of each entry matching the clocks phandles list:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15)                   - "pclk" (peripheral clock) Required.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16)                   - "gclk" (generated clock) Optional (1).
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) Optional properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) - pinctrl-0:      Should specify pin control groups used for this controller.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) - princtrl-names: Should contain only one value - "default".
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 21) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 22) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 23) (1) : Only the peripheral clock is required. The generated clock is optional
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 24)       and should be set mostly when Master Mode is required.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 25) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 26) Example:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 27) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 28) 	i2s@f001c000 {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 29) 		compatible = "microchip,sam9x60-i2smcc";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 30) 		reg = <0xf001c000 0x100>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 31) 		interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 32) 		dmas = <&dma0
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 33) 			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 34) 			 AT91_XDMAC_DT_PERID(36))>,
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 35) 		       <&dma0
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 36) 			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 37) 			 AT91_XDMAC_DT_PERID(37))>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 38) 		dma-names = "tx", "rx";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 39) 		clocks = <&i2s_clk>, <&i2s_gclk>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 40) 		clock-names = "pclk", "gclk";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 41) 		pinctrl-names = "default";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 42) 		pinctrl-0 = <&pinctrl_i2s_default>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 43) 	};