Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  1) AK4118 S/PDIF transceiver
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  2) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  3) This device supports I2C mode.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  4) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  5) Required properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  6) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  7) - compatible : "asahi-kasei,ak4118"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  8) - reg : The I2C address of the device for I2C
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  9) - reset-gpios: A GPIO specifier for the reset pin
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10) - irq-gpios: A GPIO specifier for the IRQ pin
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) Example:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14) &i2c {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) 	ak4118: ak4118@13 {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) 		#sound-dai-cells = <0>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) 		compatible = "asahi-kasei,ak4118";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) 		reg = <0x13>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) 		reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) 		irq-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 21) 	};
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 22) };