Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  1) * Amlogic Meson GXL and GXM USB2 PHY binding
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  2) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  3) Required properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  4) - compatible:	Should be "amlogic,meson-gxl-usb2-phy"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  5) - reg:		The base address and length of the registers
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  6) - #phys-cells:	must be 0 (see phy-bindings.txt in this directory)
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  7) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  8) Optional properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  9) - clocks:	a phandle to the clock of this PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10) - clock-names:	must be "phy"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11) - resets:	a phandle to the reset line of this PHY
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) - reset-names:	must be "phy"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13) - phy-supply:	see phy-bindings.txt in this directory
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) Example:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) 	usb2_phy0: phy@78000 {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) 		compatible = "amlogic,meson-gxl-usb2-phy";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) 		#phy-cells = <0>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) 		reg = <0x0 0x78000 0x0 0x20>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 21) 	};