Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  1) Micrel KS8995 SPI controlled Ethernet Switch families
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  2) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  3) Required properties (according to spi-bus.txt):
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  4) - compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795"
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  5) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  6) Optional properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  7) - reset-gpios : phandle of gpio that will be used to reset chip during probe
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  8) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  9) Example:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11) spi-master {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) 	...
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13) 	switch@0 {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14) 		compatible = "micrel,ksz8795";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) 		reg = <0>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) 		spi-max-frequency = <50000000>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) 		reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) 	};
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) };