Orange Pi5 kernel

^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  1) Device-Tree bindings for ST IRB IP
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  2) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  3) Required properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  4) 	- compatible: Should contain "st,comms-irb".
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  5) 	- reg: Base physical address of the controller and length of memory
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  6) 	  mapped region.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  7) 	- interrupts: interrupt-specifier for the sole interrupt generated by
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  8) 	  the device. The interrupt specifier format depends on the interrupt
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300  9) 	  controller parent.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 10) 	- rx-mode: can be "infrared" or "uhf". This property specifies the L1
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 11) 	  protocol used for receiving remote control signals. rx-mode should
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 12) 	  be present iff the rx pins are wired up.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 13) 	- tx-mode: should be "infrared". This property specifies the L1
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 14) 	  protocol used for transmitting remote control signals. tx-mode should
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 15) 	  be present iff the tx pins are wired up.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 16) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 17) Optional properties:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 18) 	- pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 19) 	  properly for IRB pins.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 20) 	- clocks : phandle with clock-specifier pair for IRB.
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 21) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 22) Example node:
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 23) 
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 24) 	rc: rc@fe518000 {
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 25) 		compatible	= "st,comms-irb";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 26) 		reg		= <0xfe518000 0x234>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 27) 		interrupts	= <0 203 0>;
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 28) 		rx-mode		= "infrared";
^8f3ce5b39 (kx 2023-10-28 12:00:06 +0300 29) 	};